DUTIES AND RESPONSIBILITIES: - Assume all responsibilities related to project hydraulic works such as design, analysis, etc. - Assist in design and provide recommendations hydraulic parameters of deep tunnel (Micro Tunnel, TBM etc.), pipes, conduits, design calculations and assessments etc. - Assist in external and internal coordination pertinent to hydraulic works and design. - Review, comment, recommend acceptance or otherwise on contractors’ and consultants’ submissions. - Liaise with utilities providers and stakeholders.
Job Description :
Urgently looking for an experienced Mechanical Engineer in Qatar.
Job Deletes:
• Prepares product reports by collecting, analyzing, and summarizing information and trends.
• Provides engineering information by answering questions and requests.
• Maintains product and company reputation by complying with government regulations.
• Keeps equipment operational by coordinating maintenance and repair services; following manufacturer’s instructions and established procedures; and requesting special services.
• Maintains system and product data base by writing computer programs and entering data.
• Completes projects by training and guiding technicians.
Job Requirements:
• Minimum Diploma in Mechanical Engineering.
• Three years experience in same field.
• Only Male need to apply.
• Creativity and analytical skills.
Purpose
• To supervise processes to produce contractual documentation
• To supervise and ensure that the production of contractual documents is done according to company procedure and ethics
• To produce contractual documents according to company procedure and ethics
• To provide a quality, cost-effective and time efficient contracts service to technical entities
• To participate in the optimization of the economic performance of the operations conducted
The Job holder executes the following contracts activities
• Prepare and maintain an up-to-date list of qualified contractors/suppliers/potential tenders/contracts with updated information in order to perform market studies
• Take a leading role in the validation of the contracts strategy through:
• Arranging and attending Contracts Committee Meetings
• Pre-qualifying bidders
• Defining target prices
• Defining criteria for evaluation
• Supervise the creation of CFT commercial documents
• Supervise the preparation and issue of the call for tender to contractors and suppliers on the bidders list
• Ensure the preparation and send out the dossiers of pre-consultation and Standard or Complex invitations to bid
• Verify the alignment with HSE clauses, Company rules, Procedures, Instructions and applicable legislation when issuing all technical contracts and when drafting contractual and commercial terms and conditions
• Verify the Terms & Conditions (standard, general and financial)
• Supervise the establishment of the technical contracts and contractual agreements, directly participate to the most complex contracts
• Participate in terms & conditions and commercial bid complex analysis and negotiations to ensure that a clear definition of responsibilities is developed
• Assume a leading role in RTAs through managing in Contract committees and award validation and RTA evaluations
• Handle the approval from authorities and partners, clarification of rights and obligation of signing parties and the signature process of formal documents
• Intervene in the settlement of claims and lawsuits, in relation with the Juridical, Insurance, Finance and company management by proposing strategies and actions and participating to the negotiations
• Ensure monitoring of on-going contracts status, participate in contract renewal and amendments discussions
• Review supplier performance
Requirements
• BSc Degree in Science or Commercial field or its equivalent
• International Experience Required
• Professional experience: 8 - 10 years’ post-graduate experience required. Minimum 8 years in the O&G industry. Minimum 6 years in contracts domain and minimum of 2 years as Senior Contract Engineer in the Company.
• Personal Abilities: Advanced Management, Advanced Human Relations, Problem Solving and Planning / organizing / coordinating / controlling
VAM Systems WLL is currently looking for IT Security Engineer for our Qatar operations with the following skillsets & terms and conditions:
Skill set required
Any certifications CEH,CISSP,CISA
3-5 years of relevant experience
Experience in operational SOC
Hands on experience in IT with emphasis in Network Security
Experience in vulnerability testing and auditing
Experience performing a Systems Engineer, Consultant or Architect role
Knowledge of system security vulnerabilities and remediation techniques
Knowledge of network and web related protocols (e.g., TCP/IP, UDP, IPSEC, HTTP, HTTPS, routing protocols, etc.)
Must be fully knowledgeable and able to design, plan, and support deployment efforts around IT security solutions using one or more of the following technologies
1. Network Security
2. Endpoint & Mobile Security
3. Visualization Security
4. Identity & Access management
5. Security Management and Operations
6. Encryption & VPN
7. Application Security (including web/cloud and database)
8. Anti-Malware Solutions
9. Web & Email Gateways
+ Research and analyze data such as customer design proposal, specifications, and manuals to determine feasibility of design or application. + Design products or systems in support of facilities' infrastructure, research, or maintenance requirements. + Coordinate, troubleshoot, and approve installation activities as inspection services to ensure products and systems conform to engineering design and specifications. + Establish mechanical engineering design criteria and provide guidance and evaluation for facility projects determine HVAC loads, complete equipment selection, perform duct sizing and routing, design interior/exterior plumbing and fire protection systems. + Able to serve as the alternate project lead in the absence of the site manager. + Perform all other position related duties as assigned or requested.
Country : Qatar
Description : Project Manager/Industrial ELV Engineer
Experience: 10-15 Years’ experience in industrial ELV Engineering, Networks, and Project Management including contract administrations.
Previously worked on integrated systems (Electrical and Logical) with medium/large scale projects.
Conllavino Construction Group
Description : Civil Engineer: job description
undertaking technical and feasibility studies including site investigations
using a range of computer software for developing detailed designs
undertaking complex calculations
liaising with clients and a variety of professionals including architects and subcontractors
compiling job specs and supervising tendering procedures
resolving design and development problems
managing budgets and project resources
scheduling material and equipment purchases and deliveries
making sure the project complies with legal requirements, especially health and safety
assessing the sustainability and environmental impact of projects
ensuring projects run smoothly and structures are completed within budget and on time
Key skills for civil engineers
sound mathematical, scientific and IT skills
the ability to think methodically and to manage projects
problem-solving skills
ability to work to deadlines and within budgets
ability to maintain an overview of entire projects while continuing to attend to detailed technicalities
excellent verbal and written communication skills
negotiating, supervisory and leadership skills
complete knowledge of relevant legislation
NES Qatar-------
To qualify, candidate must possess the following qualification and experience:
Qualification: Master degree in structural system engineering,
Experience: minimum 10 years’ experience as structural engineer in structural field in Oil and Gas activities. Extensive experience in structural engineering with relevant experience within the offshore oil and gas production industry,
Experience in offshore facilities or FSO, FPSO is a plus,
Available for technical missions worldwide,
Familiar with Total GS, MOQ standards and relevant codes and standards,
Language: Fluent English.
Computer literate, especially in structural calculation softwares.
Strong leadership skills and good communication skills.
Ability to work on projects in a complex and multicultural environment.
Good analytical skills.
Company : Raha for Trading & Contracting
Country : Qatar
Description : Electrical Site Engineer
Generally responsible for implementations and monitoring of all electrical related works at site.
Estimates prepare and assign resources such as manpower, materials, consumables, equipment, tools, etc., required for all electrical and related works prior to execution.
Plans and analyses all possible construction methodologies and recommends the best options to the Asst. Project Manager for approval prior to execution at site.
Interprets construction drawings and studies the contract documents and applicable standards or specifications prior to execution of any jobs.
Manages directly and provide engineering and technical support to all the electrical workgroups at the site.
Plans the execution of all electrical related works and coordinates the works to mechanical and civil groups.
Coordinates with Client / Consultant’s representatives for any site instructions and inspection of works.
Country : Doha
Description : Looking for site Engineer job having 4 years experience in Oman Residential and commercial projects and 2 years experience in Doha Metro project.
Description : - Must be available locally - Must be fluent in Arabic - Minimum of 15 years' experience year - Post graduate experience (Civil Engineering / Architecture / Construction management background) - Manage all project deliverable's in accordance with Regulatory and Statutory undertakings, complying with all Health & Safety and Environmental standards and policies. - Ensure FM/Maintenance projects are completed on budget and on schedule.
Ae.centiel
Country : Qatar
Description : We are looking for an experienced Sales Engineer to join our team in Qatar.
Requirements:
• Degree in Electrical Engineering
• 5 to 7 years of UAE experience in UPS systems and related products
• Candidates having valid UAE driving license preferred
Suitable candidates can send their cv
Description : Greetings From Swan Global!!
We have an immediate opening for HVAC Engineer position!!!!
Should have 5+ Yrs of in Supervising and maintenance experience.
Salary QR 6500 a month
Must have QID .
Any nationality.
Degree /Diploma in Mechanical Engineering
Country : Qatar
Description : Mechanical Engineer
Consultancy Company looking to hire a Mechanical Engineer.
Requirements/Qualifications:
• UPDA certified Grade A or B with 10 years’ Experience or more is a must.
• Familiar of FF, ventilation and HVAC. Plumbing.
• Designing.
• Site supervision & execution.
• Preferable experience in Consultancy.
• Salary Between Qar. 8,000 To Qar. 12,000
• Send your UPDA License along with your resume
As part of the ongoing project expansion,GRA-Gulf Coast Construction,LLC, is accepting application from qualified and experience engineers in different position: Project Engineers (For Water Division) Cost Control Engineers,Safety Officers,Project Engineer,Civil/Mechanical Engineer,Accountant,Sales Manager,Project Manager,Truck Drivers,Electrical,Structural Engineer,Quantity Surveyors, Tax Free.
Applicant should urgently forward your CV
Honeywell----
Your main duties will include the overall co-ordination, leading and management of a team of engineers; efficient design and delivery of the IBMS, DVM and Temaline Security systems; network infrastructure design, installation and commissioning support, and 3rd party product integration with EBI to include EBI support and trouble shooting with the ability to complete basic log file analysis. EBI Custom Application Programming (i.e. Interface with Peoplesoft, SAP, CHOM, Identity management). DVM and Access Control Systems design, installation, commissioning support and integration with other systems. Created with SnapFacilitate issue identification and analysisInvestigate and resolve technical issuesBuild relationships with customersLead Team AlignmentYOU MUST HAVE Bachelor's degree, or equivalent. Some experience in the field. Extensive experience working in a projects environment, with comprehensive on-site knowledge Advanced knowledge of networking, database technology, integration protocols, and current trends in the industry. Proven track record in a project design and engineering capacity involved in the delivery of technology based projects WE VALUE Willingto develop extensive product knowledge in formal training, and in “on the job†environments, working with latest Honeywell technology. Extensive customer facing experience Experience in the industry is preferred Excellent interpersonal and verbal & written communication skills Strong continuous improvement mindset, strong leadership impact Experience with Salesforce.com and SharePoint Demonstrated experience with Knowledge Management & Call Center Management Good administration skills Demonstrated management skills INCLUDES Continued Professional Development ADDITIONAL INFORMATION Category: Engineering
Plan, prioritise and manage multiple engineering projects, within budget, on schedule, safety and of the required quality. Prioritise tasks and assign team members to ensure that the team’s overall resources are used effectively and that project deadlines are met. Criteria: 5 years and above working experience as Project Manager in Oil and Gas EPCC sector Degree in Engineering - Mechanical
Company : new ways
Country : Qatar
Description : construction company need qualified civil engineer with experince 2 years in our company
if you know any qualified one with Qatar experince please let him send his CV to
he has to be in qatar with NOC and qatari driving license
ompany : Lotus Trading & Contracting Co.
Country : Qatar
Description : CIVIL QA-QC ENGINEERS/INSPECTORS - Applicants must be a graduate of Bachelor's Degree in Civil Engineering, with 02-03 years work experience in handling QA/QC works for an infrastructure projects particularly roadworks and drainage systems, a resident of Doha and with transferable visa.
To take initiatives to plan, design, provide assistance and oversee engineering projects. Should be able to calculate the cost and risk of the project based on the data collected by applying the knowledge and techniques of engineering and advanced mathematics. Should be able to prepare and modify reports, liaise with clients for terms and other specifications, prepare schedules, have the technical know - how on environmental impact studies that can benefit the project. MAJOR DUTIES AND RESPONSIBILITIES: •Study the drawings, designs, reports, maps, blueprints, aerial photography and geologic data to plan projects using design software and drawing tools •Direct and guide construction operations and other maintenance activities at project site as per construction and government standards •Timely inspection of project sites to determine the progress and ensure that it is in accordance with design specifications •Estimates the quantities and the cost of materials, equipment and/or labor needed to determine project feasibility; •Prepares or presents reports such as bid proposals, deeds, environmental impact statements, and property and right of way descriptions; •Think both creatively and logically to resolve project related issues by providing technical advice regarding design modifications and structural repairs to ensure that a project runs smoothly and it is completed on time and within budget; •Correct any project risk or deficiencies that affect the quality and safety requirements before finalizing, evaluating and providing project reviews. •Performs other related duties as may be required by the immediate supervisor.
QR10-14k + flights & medical pr month
The Company
Digby Morris' client is a highly respected employer in the Qatari market. A privately owned main contractor which employs about 5000 employees entirely in Doha, the company has been operating for about 30 years and has a turnover in the region of $600m per annum. It is largely involved in traditional D&B construction projects including hotels and high rise commercial projects.
Owing to a pending retirement the company has an immediate requirement for an ELV Project Electrical Engineer to be based in their head office in Doha.
The Role
Employee shall be responsible for the complete delivery of End-to-End Projects.
The Key Roles shall be:
1.Preparation and coordination of all project documentation.
2.Coordinating the efforts of team members and third-party contractors or consultants to deliver projects according to plan.
3.Define the project’s objectives and oversee quality control throughout its life cycle.
4.Project Execution
5.Projects Finalization within time and budget
6.Responsible for Planning & Coordination of ELV works which includes Preparing & Monitoring of Construction
7.Develop the detailed schedules for all ELV activities; Design Procurement, Installation and Testing and Commissioning of the following disciplines:
8.Insure the update and forecast ELV activities
9.Insure the follow-up of the schedule
10.Report to the project Manager
11.Coordination with procurement team for timely delivery of materials at site
12.Monitoring execution and managing overall ELV works carrying out on site observation & coordination in interpreting drawing at site
13.In-house interfacing with other departments related to drawing & ability of front Preparation of sub-contractor billing, progress reports, project documentation, procurement details of materials at site
The Ideal Candidate:
• Diploma in Electronic Engineering or relevant discipline, university degree holder will be an advantage but not mandatory.
• At least 12 years relevant working experience in Security or ELV System installation for infrastructure.
• Be self-motivated and good communication skills with different levels of trades at site.
Company : Focus Design Partners
Country : Qatar
Description : For applicant currently living in Qatar a MMUP License, NOC & Transferable is REQUIRED.
Mechanical Engineer shall provide leadership and comprehensive mechanical engineering support in planning developing and supervising mechanical installations, operations and building equipment. Capable of reviewing contractor’s submittals & proposed materials. Has full understanding of firefighting & building safety codes: i.e NFPA 101, Ashrea.. etc
Job description / Role
• Developing sustainable building services designs for commercial, educational, health care facilities, residential, tall tower, Infrastructure and mixed-use developments projects.
• Knowledge of ventilation and air conditioning systems and a successful track record of delivering detailed designs to the highest international standards.
• Performing engineering evaluations, Design reports, conceptual and final design.
• Have the basic knowledge of other mechanical systems, including but not limited to Firefighting, plumbing and gas distribution systems.
• Preparation of mechanical engineering calculation in support of systems’ design.
• Evaluating and analyzing statistical data, customer design proposals, specifications and manuals to determine feasibility of design or application.
• Working knowledge of various building services design codes such as British Standards, ASHRAE, NFPA, UPC,IPC, IMC and other International design codes. Knowledge in local Codes in Qatar QCS and QCDD has an added value.
• Interfacing, coordinating and working with the Arch, Structural and MEP design team in a professional manner to achieve project goals.
Requirements
• Bachelor’s Degree in Mechanical Engineering.
• 5 to 7 years of experience, with Major Exp into HVAC Design.
• Excellent communication and time management skills.
• Experience using computer HVAC design tools, AutoCAD, Revit MEP is essential.
Company : PENINSULAR PETROTECH ENGINEERING
Country : Qatar
Description : Mechanical Qc engineer with 7 years of experience in EPC oil and gas, petrochemical
Prepare, schedule, coordinate, and monitor all assigned projects.
• Responsible for security, health and safety. The main source of technical advice and quality control for everyone working on site.
• Organizing and supervising materials and people. Agree the price and oversee the choice for materials to be used on the project.
• Mark out the site, make sure designs are applied correctly and liaise with main and sub-contractors and the site manager.
• Regular liaison with the client, its representatives, and any consultants.
• Levelling and surveying a site, checking drawings and quantities and ensuring the accuracy of calculations.
• Compile estimates for technical and material requirements for project development.
• Suggest process and technical design changes to improve performance and efficiency.
• Prepare proposal documents and presentations. Maintain detailed documentation of all site engineering activities.
• Compile and present reports explaining project details.
• Liaise with the local authority (where appropriate to the project) to ensure compliance with local construction regulations and by-laws.
• Monitor project progress, compliance with design specifications and safety standards.
• Direct engineering activities; assign tasks, provide training and support.
• Create work schedules and adjust as needed to meet project deadlines.
• Maintain quality control in every area (budget, scheduling, planning, personnel performance, team dynamics).
• Communicate effectively with project manager and other project participants in order to provide needed assistance and technical support.
• Reviewing engineering deliverables; initiate appropriate corrective actions throughout the project life-cycle.
• Plan the work to be done and organize things so that deadlines are met.
Requirements
• Prepare, schedule, coordinate, and monitor all assigned projects.
• Responsible for security, health and safety. The main source of technical advice and quality control for everyone working on site.
• Organizing and supervising materials and people. Agree the price and oversee the choice for materials to be used on the project.
• Mark out the site, make sure designs are applied correctly and liaise with main and sub-contractors and the site manager.
• Regular liaison with the client, its representatives, and any consultants.
• Leveling and surveying a site, checking drawings and quantities and ensuring the accuracy of calculations.
• Compile estimates for technical and material requirements for project development.
• Suggest process and technical design changes to improve performance and efficiency.
• Prepare proposal documents and presentations. Maintain detailed documentation of all site engineering activities.
The Quality Assurance/ Quality Control Engineer is responsible for the development, management, implementation and monitoring of the Quality Management System to safely execute, commission and handover the relevant Project on schedule in line with ANCD’s corporate QHSE standards.
Responsibilities and Duties
• Liaise with the QHSE Team and all personnel assigned to the project in establishing an overall Company Quality Management Plan based on Companies QHSE Management standards and Project requirements. Direct, optimize and coordinate full order cycle.
• Monitor implementation of the Asset/Project/Function Quality Management System through regular audits and reviews.
• Establish and monitor Key Performance Indicators (KPIs) to measure quality performance in different areas of work development and at various project Phases.
• Monitor Company Quality System activities such as Site Quality activities based on Companies Management system and Project requirements.
• Develop and ensure QA requirements are incorporated into Tender Documents, Contracts and Purchase Orders.
• Responsible for Construction Quality staff.
• Communicate with Client on Project Quality issues.
• Promotes Quality Awareness among project team members, contractors and vendors.
• Develop the Project Quality Training Plan. Ensure implementation of the plan. Ensure that training records are maintained.
• Identify and manage risks that could impact achieving quality objectives.
• Execute and facilitate criticality assessment sessions and develop Quality Intervention Plans for procured items.
• Accountable for the successful completion of engineering projects. • Management of all stakeholders associated with the project • Value Engineering during construction • Quality control of all Electrical Installation works • Design and development of Electrical engineering drawings • Proficiency in AutoCAD • Knowledge of Primavera Skills • Design and development of Electrical engineering drawings • Proficiency in AutoCAD • Knowledge of Primavera
• Execute mechanical, electrical & plumbing activities according to drawings and taking approvals from consultant and client time to time.
• In-charge of material submittals and take off for materials in the site.
• Oversee and monitor the installation and handling of HVAC System, Fire Fighting System, Plumbing & Drainage System.
• Develop inspection procedures and implement throughout the construction stages. Ensure Implementation of Quality standards and Control.
• Coordinate with electrical and civil contractors for better work results at worksite
• Carried out inspections related to material and mechanical activities completed on site.MEP Emgieen
- Should have at least 5 years of experience in big infrastructure project across the middle east region
- Should have diploma/degree in Mechanical or Electrical Engineering
- Fluent in English Language
- Should be able to relocate in Qatar immediately
Skills and Experience:
• Bachelor engineering degree in Civil or Structural Engineering. Master Degree is an added advantage.
• Minimum 10 years of experience in design environment with design of Steel and Concrete building and Precast design experience.
• Well versed in American and Euro codes, standards, practices and local authority’s requirements.
• Hands on experience with FEM software such as ETABS, SAFE, SAP 2000, Staad Pro, Prokon etc.
• Ability to work independently and as a part of team.
Responsibilities:
• Perform analysis, design and documentation of simple as well as complex structures.
• Conduct review of structural design and drawings of buildings includes precast structures.
• Preparation, issue of design and review reports for authorities’ submission.
• Co-ordinate with other disciplines such as Architectural and MEP and infrastructure.
Company : Dar Al Sahra Energy services
Country : Qatar
Description : QHSE/QAQC officer/engineer with experience in ISO requirements
Country : Qatar
Description : Job Title : Civil Engineer
Qualification : Bachelor Degree in Civil Engineering
Experience : Minimum 15 years experience with at least 5 years in Qatar / GCC with a valid UPD A Grade
Note : Must mention Civil Engineer in Subject
DUTIES AND RESPONSIBILITIES: - Assume all responsibilities related to project hydraulic works such as design, analysis, etc. - Assist in design and provide recommendations hydraulic parameters of deep tunnel (Micro Tunnel, TBM etc.), pipes, conduits, design calculations and assessments etc. - Assist in external and internal coordination pertinent to hydraulic works and design. - Review, comment, recommend acceptance or otherwise on contractors’ and consultants’ submissions. - Liaise with utilities providers and stakeholders.
Job Description :
Urgently looking for an experienced Mechanical Engineer in Qatar.
Job Deletes:
• Prepares product reports by collecting, analyzing, and summarizing information and trends.
• Provides engineering information by answering questions and requests.
• Maintains product and company reputation by complying with government regulations.
• Keeps equipment operational by coordinating maintenance and repair services; following manufacturer’s instructions and established procedures; and requesting special services.
• Maintains system and product data base by writing computer programs and entering data.
• Completes projects by training and guiding technicians.
Job Requirements:
• Minimum Diploma in Mechanical Engineering.
• Three years experience in same field.
• Only Male need to apply.
• Creativity and analytical skills.
Purpose
• To supervise processes to produce contractual documentation
• To supervise and ensure that the production of contractual documents is done according to company procedure and ethics
• To produce contractual documents according to company procedure and ethics
• To provide a quality, cost-effective and time efficient contracts service to technical entities
• To participate in the optimization of the economic performance of the operations conducted
The Job holder executes the following contracts activities
• Prepare and maintain an up-to-date list of qualified contractors/suppliers/potential tenders/contracts with updated information in order to perform market studies
• Take a leading role in the validation of the contracts strategy through:
• Arranging and attending Contracts Committee Meetings
• Pre-qualifying bidders
• Defining target prices
• Defining criteria for evaluation
• Supervise the creation of CFT commercial documents
• Supervise the preparation and issue of the call for tender to contractors and suppliers on the bidders list
• Ensure the preparation and send out the dossiers of pre-consultation and Standard or Complex invitations to bid
• Verify the alignment with HSE clauses, Company rules, Procedures, Instructions and applicable legislation when issuing all technical contracts and when drafting contractual and commercial terms and conditions
• Verify the Terms & Conditions (standard, general and financial)
• Supervise the establishment of the technical contracts and contractual agreements, directly participate to the most complex contracts
• Participate in terms & conditions and commercial bid complex analysis and negotiations to ensure that a clear definition of responsibilities is developed
• Assume a leading role in RTAs through managing in Contract committees and award validation and RTA evaluations
• Handle the approval from authorities and partners, clarification of rights and obligation of signing parties and the signature process of formal documents
• Intervene in the settlement of claims and lawsuits, in relation with the Juridical, Insurance, Finance and company management by proposing strategies and actions and participating to the negotiations
• Ensure monitoring of on-going contracts status, participate in contract renewal and amendments discussions
• Review supplier performance
Requirements
• BSc Degree in Science or Commercial field or its equivalent
• International Experience Required
• Professional experience: 8 - 10 years’ post-graduate experience required. Minimum 8 years in the O&G industry. Minimum 6 years in contracts domain and minimum of 2 years as Senior Contract Engineer in the Company.
• Personal Abilities: Advanced Management, Advanced Human Relations, Problem Solving and Planning / organizing / coordinating / controlling
VAM Systems WLL is currently looking for IT Security Engineer for our Qatar operations with the following skillsets & terms and conditions:
Skill set required
Any certifications CEH,CISSP,CISA
3-5 years of relevant experience
Experience in operational SOC
Hands on experience in IT with emphasis in Network Security
Experience in vulnerability testing and auditing
Experience performing a Systems Engineer, Consultant or Architect role
Knowledge of system security vulnerabilities and remediation techniques
Knowledge of network and web related protocols (e.g., TCP/IP, UDP, IPSEC, HTTP, HTTPS, routing protocols, etc.)
Must be fully knowledgeable and able to design, plan, and support deployment efforts around IT security solutions using one or more of the following technologies
1. Network Security
2. Endpoint & Mobile Security
3. Visualization Security
4. Identity & Access management
5. Security Management and Operations
6. Encryption & VPN
7. Application Security (including web/cloud and database)
8. Anti-Malware Solutions
9. Web & Email Gateways
+ Research and analyze data such as customer design proposal, specifications, and manuals to determine feasibility of design or application. + Design products or systems in support of facilities' infrastructure, research, or maintenance requirements. + Coordinate, troubleshoot, and approve installation activities as inspection services to ensure products and systems conform to engineering design and specifications. + Establish mechanical engineering design criteria and provide guidance and evaluation for facility projects determine HVAC loads, complete equipment selection, perform duct sizing and routing, design interior/exterior plumbing and fire protection systems. + Able to serve as the alternate project lead in the absence of the site manager. + Perform all other position related duties as assigned or requested.
Country : Qatar
Description : Project Manager/Industrial ELV Engineer
Experience: 10-15 Years’ experience in industrial ELV Engineering, Networks, and Project Management including contract administrations.
Previously worked on integrated systems (Electrical and Logical) with medium/large scale projects.
Conllavino Construction Group
Description : Civil Engineer: job description
undertaking technical and feasibility studies including site investigations
using a range of computer software for developing detailed designs
undertaking complex calculations
liaising with clients and a variety of professionals including architects and subcontractors
compiling job specs and supervising tendering procedures
resolving design and development problems
managing budgets and project resources
scheduling material and equipment purchases and deliveries
making sure the project complies with legal requirements, especially health and safety
assessing the sustainability and environmental impact of projects
ensuring projects run smoothly and structures are completed within budget and on time
Key skills for civil engineers
sound mathematical, scientific and IT skills
the ability to think methodically and to manage projects
problem-solving skills
ability to work to deadlines and within budgets
ability to maintain an overview of entire projects while continuing to attend to detailed technicalities
excellent verbal and written communication skills
negotiating, supervisory and leadership skills
complete knowledge of relevant legislation
NES Qatar-------
To qualify, candidate must possess the following qualification and experience:
Qualification: Master degree in structural system engineering,
Experience: minimum 10 years’ experience as structural engineer in structural field in Oil and Gas activities. Extensive experience in structural engineering with relevant experience within the offshore oil and gas production industry,
Experience in offshore facilities or FSO, FPSO is a plus,
Available for technical missions worldwide,
Familiar with Total GS, MOQ standards and relevant codes and standards,
Language: Fluent English.
Computer literate, especially in structural calculation softwares.
Strong leadership skills and good communication skills.
Ability to work on projects in a complex and multicultural environment.
Good analytical skills.
Company : Raha for Trading & Contracting
Country : Qatar
Description : Electrical Site Engineer
Generally responsible for implementations and monitoring of all electrical related works at site.
Estimates prepare and assign resources such as manpower, materials, consumables, equipment, tools, etc., required for all electrical and related works prior to execution.
Plans and analyses all possible construction methodologies and recommends the best options to the Asst. Project Manager for approval prior to execution at site.
Interprets construction drawings and studies the contract documents and applicable standards or specifications prior to execution of any jobs.
Manages directly and provide engineering and technical support to all the electrical workgroups at the site.
Plans the execution of all electrical related works and coordinates the works to mechanical and civil groups.
Coordinates with Client / Consultant’s representatives for any site instructions and inspection of works.
Country : Doha
Description : Looking for site Engineer job having 4 years experience in Oman Residential and commercial projects and 2 years experience in Doha Metro project.
Description : - Must be available locally - Must be fluent in Arabic - Minimum of 15 years' experience year - Post graduate experience (Civil Engineering / Architecture / Construction management background) - Manage all project deliverable's in accordance with Regulatory and Statutory undertakings, complying with all Health & Safety and Environmental standards and policies. - Ensure FM/Maintenance projects are completed on budget and on schedule.
Ae.centiel
Country : Qatar
Description : We are looking for an experienced Sales Engineer to join our team in Qatar.
Requirements:
• Degree in Electrical Engineering
• 5 to 7 years of UAE experience in UPS systems and related products
• Candidates having valid UAE driving license preferred
Suitable candidates can send their cv
Description : Greetings From Swan Global!!
We have an immediate opening for HVAC Engineer position!!!!
Should have 5+ Yrs of in Supervising and maintenance experience.
Salary QR 6500 a month
Must have QID .
Any nationality.
Degree /Diploma in Mechanical Engineering
Country : Qatar
Description : Mechanical Engineer
Consultancy Company looking to hire a Mechanical Engineer.
Requirements/Qualifications:
• UPDA certified Grade A or B with 10 years’ Experience or more is a must.
• Familiar of FF, ventilation and HVAC. Plumbing.
• Designing.
• Site supervision & execution.
• Preferable experience in Consultancy.
• Salary Between Qar. 8,000 To Qar. 12,000
• Send your UPDA License along with your resume
As part of the ongoing project expansion,GRA-Gulf Coast Construction,LLC, is accepting application from qualified and experience engineers in different position: Project Engineers (For Water Division) Cost Control Engineers,Safety Officers,Project Engineer,Civil/Mechanical Engineer,Accountant,Sales Manager,Project Manager,Truck Drivers,Electrical,Structural Engineer,Quantity Surveyors, Tax Free.
Applicant should urgently forward your CV
Honeywell----
Your main duties will include the overall co-ordination, leading and management of a team of engineers; efficient design and delivery of the IBMS, DVM and Temaline Security systems; network infrastructure design, installation and commissioning support, and 3rd party product integration with EBI to include EBI support and trouble shooting with the ability to complete basic log file analysis. EBI Custom Application Programming (i.e. Interface with Peoplesoft, SAP, CHOM, Identity management). DVM and Access Control Systems design, installation, commissioning support and integration with other systems. Created with SnapFacilitate issue identification and analysisInvestigate and resolve technical issuesBuild relationships with customersLead Team AlignmentYOU MUST HAVE Bachelor's degree, or equivalent. Some experience in the field. Extensive experience working in a projects environment, with comprehensive on-site knowledge Advanced knowledge of networking, database technology, integration protocols, and current trends in the industry. Proven track record in a project design and engineering capacity involved in the delivery of technology based projects WE VALUE Willingto develop extensive product knowledge in formal training, and in “on the job†environments, working with latest Honeywell technology. Extensive customer facing experience Experience in the industry is preferred Excellent interpersonal and verbal & written communication skills Strong continuous improvement mindset, strong leadership impact Experience with Salesforce.com and SharePoint Demonstrated experience with Knowledge Management & Call Center Management Good administration skills Demonstrated management skills INCLUDES Continued Professional Development ADDITIONAL INFORMATION Category: Engineering
Plan, prioritise and manage multiple engineering projects, within budget, on schedule, safety and of the required quality. Prioritise tasks and assign team members to ensure that the team’s overall resources are used effectively and that project deadlines are met. Criteria: 5 years and above working experience as Project Manager in Oil and Gas EPCC sector Degree in Engineering - Mechanical
Company : new ways
Country : Qatar
Description : construction company need qualified civil engineer with experince 2 years in our company
if you know any qualified one with Qatar experince please let him send his CV to
he has to be in qatar with NOC and qatari driving license
ompany : Lotus Trading & Contracting Co.
Country : Qatar
Description : CIVIL QA-QC ENGINEERS/INSPECTORS - Applicants must be a graduate of Bachelor's Degree in Civil Engineering, with 02-03 years work experience in handling QA/QC works for an infrastructure projects particularly roadworks and drainage systems, a resident of Doha and with transferable visa.
To take initiatives to plan, design, provide assistance and oversee engineering projects. Should be able to calculate the cost and risk of the project based on the data collected by applying the knowledge and techniques of engineering and advanced mathematics. Should be able to prepare and modify reports, liaise with clients for terms and other specifications, prepare schedules, have the technical know - how on environmental impact studies that can benefit the project. MAJOR DUTIES AND RESPONSIBILITIES: •Study the drawings, designs, reports, maps, blueprints, aerial photography and geologic data to plan projects using design software and drawing tools •Direct and guide construction operations and other maintenance activities at project site as per construction and government standards •Timely inspection of project sites to determine the progress and ensure that it is in accordance with design specifications •Estimates the quantities and the cost of materials, equipment and/or labor needed to determine project feasibility; •Prepares or presents reports such as bid proposals, deeds, environmental impact statements, and property and right of way descriptions; •Think both creatively and logically to resolve project related issues by providing technical advice regarding design modifications and structural repairs to ensure that a project runs smoothly and it is completed on time and within budget; •Correct any project risk or deficiencies that affect the quality and safety requirements before finalizing, evaluating and providing project reviews. •Performs other related duties as may be required by the immediate supervisor.
QR10-14k + flights & medical pr month
The Company
Digby Morris' client is a highly respected employer in the Qatari market. A privately owned main contractor which employs about 5000 employees entirely in Doha, the company has been operating for about 30 years and has a turnover in the region of $600m per annum. It is largely involved in traditional D&B construction projects including hotels and high rise commercial projects.
Owing to a pending retirement the company has an immediate requirement for an ELV Project Electrical Engineer to be based in their head office in Doha.
The Role
Employee shall be responsible for the complete delivery of End-to-End Projects.
The Key Roles shall be:
1.Preparation and coordination of all project documentation.
2.Coordinating the efforts of team members and third-party contractors or consultants to deliver projects according to plan.
3.Define the project’s objectives and oversee quality control throughout its life cycle.
4.Project Execution
5.Projects Finalization within time and budget
6.Responsible for Planning & Coordination of ELV works which includes Preparing & Monitoring of Construction
7.Develop the detailed schedules for all ELV activities; Design Procurement, Installation and Testing and Commissioning of the following disciplines:
8.Insure the update and forecast ELV activities
9.Insure the follow-up of the schedule
10.Report to the project Manager
11.Coordination with procurement team for timely delivery of materials at site
12.Monitoring execution and managing overall ELV works carrying out on site observation & coordination in interpreting drawing at site
13.In-house interfacing with other departments related to drawing & ability of front Preparation of sub-contractor billing, progress reports, project documentation, procurement details of materials at site
The Ideal Candidate:
• Diploma in Electronic Engineering or relevant discipline, university degree holder will be an advantage but not mandatory.
• At least 12 years relevant working experience in Security or ELV System installation for infrastructure.
• Be self-motivated and good communication skills with different levels of trades at site.
Company : Focus Design Partners
Country : Qatar
Description : For applicant currently living in Qatar a MMUP License, NOC & Transferable is REQUIRED.
Mechanical Engineer shall provide leadership and comprehensive mechanical engineering support in planning developing and supervising mechanical installations, operations and building equipment. Capable of reviewing contractor’s submittals & proposed materials. Has full understanding of firefighting & building safety codes: i.e NFPA 101, Ashrea.. etc
Job description / Role
• Developing sustainable building services designs for commercial, educational, health care facilities, residential, tall tower, Infrastructure and mixed-use developments projects.
• Knowledge of ventilation and air conditioning systems and a successful track record of delivering detailed designs to the highest international standards.
• Performing engineering evaluations, Design reports, conceptual and final design.
• Have the basic knowledge of other mechanical systems, including but not limited to Firefighting, plumbing and gas distribution systems.
• Preparation of mechanical engineering calculation in support of systems’ design.
• Evaluating and analyzing statistical data, customer design proposals, specifications and manuals to determine feasibility of design or application.
• Working knowledge of various building services design codes such as British Standards, ASHRAE, NFPA, UPC,IPC, IMC and other International design codes. Knowledge in local Codes in Qatar QCS and QCDD has an added value.
• Interfacing, coordinating and working with the Arch, Structural and MEP design team in a professional manner to achieve project goals.
Requirements
• Bachelor’s Degree in Mechanical Engineering.
• 5 to 7 years of experience, with Major Exp into HVAC Design.
• Excellent communication and time management skills.
• Experience using computer HVAC design tools, AutoCAD, Revit MEP is essential.
Company : PENINSULAR PETROTECH ENGINEERING
Country : Qatar
Description : Mechanical Qc engineer with 7 years of experience in EPC oil and gas, petrochemical
Prepare, schedule, coordinate, and monitor all assigned projects.
• Responsible for security, health and safety. The main source of technical advice and quality control for everyone working on site.
• Organizing and supervising materials and people. Agree the price and oversee the choice for materials to be used on the project.
• Mark out the site, make sure designs are applied correctly and liaise with main and sub-contractors and the site manager.
• Regular liaison with the client, its representatives, and any consultants.
• Levelling and surveying a site, checking drawings and quantities and ensuring the accuracy of calculations.
• Compile estimates for technical and material requirements for project development.
• Suggest process and technical design changes to improve performance and efficiency.
• Prepare proposal documents and presentations. Maintain detailed documentation of all site engineering activities.
• Compile and present reports explaining project details.
• Liaise with the local authority (where appropriate to the project) to ensure compliance with local construction regulations and by-laws.
• Monitor project progress, compliance with design specifications and safety standards.
• Direct engineering activities; assign tasks, provide training and support.
• Create work schedules and adjust as needed to meet project deadlines.
• Maintain quality control in every area (budget, scheduling, planning, personnel performance, team dynamics).
• Communicate effectively with project manager and other project participants in order to provide needed assistance and technical support.
• Reviewing engineering deliverables; initiate appropriate corrective actions throughout the project life-cycle.
• Plan the work to be done and organize things so that deadlines are met.
Requirements
• Prepare, schedule, coordinate, and monitor all assigned projects.
• Responsible for security, health and safety. The main source of technical advice and quality control for everyone working on site.
• Organizing and supervising materials and people. Agree the price and oversee the choice for materials to be used on the project.
• Mark out the site, make sure designs are applied correctly and liaise with main and sub-contractors and the site manager.
• Regular liaison with the client, its representatives, and any consultants.
• Leveling and surveying a site, checking drawings and quantities and ensuring the accuracy of calculations.
• Compile estimates for technical and material requirements for project development.
• Suggest process and technical design changes to improve performance and efficiency.
• Prepare proposal documents and presentations. Maintain detailed documentation of all site engineering activities.
The Quality Assurance/ Quality Control Engineer is responsible for the development, management, implementation and monitoring of the Quality Management System to safely execute, commission and handover the relevant Project on schedule in line with ANCD’s corporate QHSE standards.
Responsibilities and Duties
• Liaise with the QHSE Team and all personnel assigned to the project in establishing an overall Company Quality Management Plan based on Companies QHSE Management standards and Project requirements. Direct, optimize and coordinate full order cycle.
• Monitor implementation of the Asset/Project/Function Quality Management System through regular audits and reviews.
• Establish and monitor Key Performance Indicators (KPIs) to measure quality performance in different areas of work development and at various project Phases.
• Monitor Company Quality System activities such as Site Quality activities based on Companies Management system and Project requirements.
• Develop and ensure QA requirements are incorporated into Tender Documents, Contracts and Purchase Orders.
• Responsible for Construction Quality staff.
• Communicate with Client on Project Quality issues.
• Promotes Quality Awareness among project team members, contractors and vendors.
• Develop the Project Quality Training Plan. Ensure implementation of the plan. Ensure that training records are maintained.
• Identify and manage risks that could impact achieving quality objectives.
• Execute and facilitate criticality assessment sessions and develop Quality Intervention Plans for procured items.
• Accountable for the successful completion of engineering projects. • Management of all stakeholders associated with the project • Value Engineering during construction • Quality control of all Electrical Installation works • Design and development of Electrical engineering drawings • Proficiency in AutoCAD • Knowledge of Primavera Skills • Design and development of Electrical engineering drawings • Proficiency in AutoCAD • Knowledge of Primavera
• Execute mechanical, electrical & plumbing activities according to drawings and taking approvals from consultant and client time to time.
• In-charge of material submittals and take off for materials in the site.
• Oversee and monitor the installation and handling of HVAC System, Fire Fighting System, Plumbing & Drainage System.
• Develop inspection procedures and implement throughout the construction stages. Ensure Implementation of Quality standards and Control.
• Coordinate with electrical and civil contractors for better work results at worksite
• Carried out inspections related to material and mechanical activities completed on site.MEP Emgieen
- Should have at least 5 years of experience in big infrastructure project across the middle east region
- Should have diploma/degree in Mechanical or Electrical Engineering
- Fluent in English Language
- Should be able to relocate in Qatar immediately
Skills and Experience:
• Bachelor engineering degree in Civil or Structural Engineering. Master Degree is an added advantage.
• Minimum 10 years of experience in design environment with design of Steel and Concrete building and Precast design experience.
• Well versed in American and Euro codes, standards, practices and local authority’s requirements.
• Hands on experience with FEM software such as ETABS, SAFE, SAP 2000, Staad Pro, Prokon etc.
• Ability to work independently and as a part of team.
Responsibilities:
• Perform analysis, design and documentation of simple as well as complex structures.
• Conduct review of structural design and drawings of buildings includes precast structures.
• Preparation, issue of design and review reports for authorities’ submission.
• Co-ordinate with other disciplines such as Architectural and MEP and infrastructure.
Company : Dar Al Sahra Energy services
Country : Qatar
Description : QHSE/QAQC officer/engineer with experience in ISO requirements
Country : Qatar
Description : Job Title : Civil Engineer
Qualification : Bachelor Degree in Civil Engineering
Experience : Minimum 15 years experience with at least 5 years in Qatar / GCC with a valid UPD A Grade
Note : Must mention Civil Engineer in Subject