Qatar's largest employment website since 2004

Jobs updated
Showing 1 to 17 of 17 Entries

Maintenace Technician Qatar

More Details

Category : Maintenance
Description : Duties and Responsibilities • Installs pipes and fixtures, such as sinks and toilets, for water, gas, steam, air, or other liquids • Assembles fittings and valves for installation • Follows health and safety standards and complies with building codes • Perform routine maintenance of plumbing systems in residential and commercial buildings • Respond to plumbing calls from our general contracting team • Perform other tasks as delegated by direct superior Skills and Qualifications • At least secondary school or equivalent • Minimum 2 years of Experience • Filipino or Nepali only • With Transferable VISA and NOC • Accommodation and transportation will be provided by the company • Good communication and interpersonal skills • Send CV to jobsqatarfind2020@gmail.com Installs, maintains, and repairs pipes and fixtures associated with heating, cooling, water distribution, and sanitation systems in residential and commercial structures. Repair and inspects drainage and other plumbing systems for leakage.

Technicians Qatar

More Details

Lumatron Qatar WLL



Min 2 years Experience 

Daily execution of electrical maintenance (preventive and emergency) activities and related works as per instruction.

Co-ordination with technicians of other disciplines

Redaction of reports; understanding of technical specifications and drawings

Cabling, control panel, and general electrical maintenance

Perform on-site installation and commissioning, servicing maintenance and trouble shooting at site.

Should be well versed in local and international standards

To attend to technical inquiries and after sales services.

Any of the listed below is an add value



Experience in Central Battery System, Emergency Lighting

Lighting Control System

Telecom: CCTV, Access control, and Structured cabling

AV Systems: Internet Protocol Television (IPTV), Digital Signage & Video Wall.

trouble shooting for System EST (Edwards), Siemens etc.

Dismantling/reassembling of electromechanical equipment

Maintenance manager Qatar

More Details

Company : Al Habari Group

Country : Qatar

Description : 

Location: Al Khor



Minimum 4-5 yrs of experience in handling rental and maintenance of heavy equipment in Qatar



Qualification: minimum graduate with computer skills



With transferable visa & valid driving license in Qatar

Cleaning professionals Qatar

More Details

Country : Qatar
Description : If you are an experienced cleaner and look for a job in a busy but friendly environment, please review the rest of this job ads by IFI!
Who is IFI-Qatar:
International First Idea Co. Ltd, IFI, an IDP (IDP.com) affiliate, will commence its business operations in Doha, Qatar in three main functions: IELTS Exam Centre, IELT preparation and English Training Institute, Student Placement Centre.
- The IFI IELTS Exam Centre will offer a range of innovative, high quality and cost-effective services to an array of clients including students, professionals, English instructors and organizations.
- Constituently focus on of innovative, highly quality and cost- effective services for a range of clients including students, professionals, English teachers, organizations.
- Create a safe but at the same time challenging environment for our staff to prosper and grow in tandem with customer expectations.
Main responsibility
• Perform heavy cleaning duties, such as cleaning floors, dusting, sweeping, vacuuming, mopping, cleaning ceiling vents, restroom cleaning, shampooing rugs/ Steam-cleaning, washing walls, windows and glass partition, Clean and polish furniture and fixtures and removing rubbish.
• Conducting routine maintenance activities, notifying management of need for repairs, and cleaning sidewalk.
• Maintain the keys and ensuring of the security of the facility
• Monitoring the stock and supply designated facility areas including purchasing supplies and equipment needed for cleaning and maintenance duties
• Perform and document routine inspection and maintenance activities
• Move heavy furniture, equipment, and supplies, either manually or by using hand trucks.
• Carry out special projects
• Make adjustments and minor repairs
• Cooperate with the rest of the staff
• Follow all health and safety regulations
Eligibility Criteria
-Experience in conducting similar role is mandatory
- Ability to communicate in clear, spoken English.
-Having a car and driving license is a bonus
- Excellent customer service skills
- Flexibility, reliability and being comfortable working under pressure and multi-tasking
-An eye for detail is essential.

Pipe fitter Qatar

More Details

Country : qatar

Description : we need pipe fitter ( especially HDPE and UPVC pipe)

Salary negotiable

working hours 10 hours

Accommodation free

Food Allowance

Working site KATAARA hotel Lusail 

Facilities & Maintenance Consultant

More Details

We are looking for Facilities & Maintenance Consultant having 10 years of Experience in Marine or Shipyard.

Experience Required :

Maintenance of Shipyard Equipment & Machinery
Shipyard Facility & Infrastructure Management
Requirements :

Available to join Immediately
With QID (Secondment)
Thank You

Service manager Qatar

More Details

Baker Hughes



As a member of our talent community, you will be amongst the first to get exclusive news about Baker Hughes, various cool projects we are working on, our employee success stories and new job opportunities you may be interested in. Essential Responsibilities: • Qualified in accordance with the Baker Hughes competency and training requirements. • Knowledgeable with all aspects of directional well planning including types of directional well profiles, fundamental concepts of directional well planning, and good knowledge of directional drilling downhole tools. • Knowledgeable with all available directional equipment, services, and resources. • Proficient in Well Architect planning software and other software as directed by COMPANY based on the CONTRACT requirements. • Capable of coordinating all required activities and possess strong analytical and technical skills. • Fluent in the English language (i.e., speaking, reading, and writing) • Proficient and knowledgeable with the Baker Hughes Quality Management System. Work Experience Qualifications/Requirements: A senior Directional Driller/Engineer with a minimum of ten (10) years of experience in providing DD/MWD/LWD Services including at least three (3) years of experience as a Directional Drilling Coordinator. • Please remember that joining the Talent Community is not an application for any specific job at Baker Hughes but to have the privilege of being considered for an opportunity that suits your profile on priority

HVAC Technician Qatar

More Details

Company : Climatech contracting and ac maintenance

Country : qatar

Description : Need HVAC technician 

Nee Well Experienced HVAC technician 

Driving license should be advantage

Salary should be discuss on interview

Service engineer Qatar

More Details

Country : Qatar

Description : Service Engg- Heavy Equipment



Should be a Mechanical/Mechatronics Engineer with 3 to 5 years relevant experience in the Heavy Equipment industry Required to provide expert technical engineering support for equipment maintenance and repair for aerial work platforms. Need to possess hand on experience of machinery like scissor lift, boom lift and man lift.

Water technician Qatar

More Details

Country : qatar

Description : We are #hiring Chiller Water Technician



The Chiller Technician is responsible for operating, maintaining, and performing repairs on assigned HVAC and Refrigeration equipment and controls, chilled water systems, boilers, and various other mechanical, electrical, and building systems in such a manner as to ensure optimal client relations.

The Chiller Technician may also perform other tasks as needed

Service engineer Qatar

More Details

Company : United Gulf Access

Country : Qatar

Description : SERVICE ENGINEER - HEAVY EQUIPMENT

•Should be a Mechanical/Mechatronics Engineer with 3 to 5 years relevant experience in the Heavy Equipment industry.

•Required to provide expert technical engineering support for equipment maintenance and repair for aerial work platforms. '

•Need to possess hand on experience of machinery like scissor lift, boom lift and man lift.



•Salary: QAR 7,000.00 

HVAC Technicians Qatar

More Details

Company : Dhamac Group

Country : Qatar

Description : URGENT Hiring! 



We are looking for a Candidate For American Federal Government Client.

Positions: (25)HVAC Technician, (8)Plumber Technician, (12)Electrical Technician.

A 3-6 months project and could be hired on a 1-2 years temporary contract basis.

Suitable for In-country applicants and affected by the recession due to Pandemic.

Preferably with a secondment from the current company and with experience from positions mentioned above.

Put your desired position on email subject with salary expectation. Mention your current visa status and ID expiration.

Send your application

Professional cleaners Qatar

More Details

ountry : Qatar

Description : We need a professional cleaner Urgently in Doha for our Leisure Fitness Club. Kindly send your resumes at greenwallksa2020@gmail.com



The Custodian will be responsible for the overall cleanliness of all areas of the facility to ensure a positive member experience.





Essential Duties and Responsibilities:



Thoroughly clean and sanitize restrooms, locker room areas, fitness equipment and gym floor.

Stock locker rooms with proper supplies/paper products

Report any broken or missing amenities or equipment (Toilets, faucets, showers, hairdryers, gym equipment etc.) to the Club Manager

Carry out heavy cleansing tasks and special projects

Performing and documenting routine inspection and maintenance activities  

Clean, stock and supply designated facility areas (dusting, sweeping, vacuuming, mopping, cleaning ceiling vents, restroom cleaning etc)

Notify management of occurring deficiencies or needs for repairs

Make adjustments and minor repairs

Stock and maintain supply rooms

Follow all health and safety regulations





Qualifications/Requirements:



Custodial experience is preferred

Punctuality and reliability is a must

Honesty and exceptional work ethic

Ability to solve problems independently

Demonstrate diplomacy in all interactions while using appropriate behaviour and language

Proven working experience as a Cleaner

Ability to handle heavy equipment and machinery

Knowledge of cleaning chemicals and supplies

Familiarity with Material Safety Data Sheets

Integrity

High school degree

Must be 18 years of age or older

HSE Officers Qatar

More Details

Staunch Trading and Contracting



Description : Urgent Hiring HSE Officers Qatar gas project.



Must have 5 to 6 years Ras Gas Experience

Job description: 

Administrate safety orientation, build safety culture among workers assigned to tasks

To support site safety audit, inspection, gas detector management

To support inspection of safety equipment(i.e. wind socks, safety shower, Breathing Air Sets (SCBA & EEBD's), Gas Detectors)

Permit to work monitoring.

Any other related duties of HSE Officer. 



Locally available in Qatar

Valid QID Mandatory 

Nebosh& RAS Gas experience certificates mandatory

DVC form mandatory for gate pass







Interested candidates can send their CV

Electrical technician Qatar

More Details

Country : Qatar
Description : A leading MNC based in Doha requires an electrical technician urgently. The desired candidate must meet the following mandatory requirements.
REQUIREMENTS:
1. Good communication skill
2. Diploma in Electrical field
3. 3+ Years of Electrical installation and maintenance experience
4. Valid Qatar driving license
5. Transferable NOC
6. Date of joining : 23/08/2020
REMUNERATION:
Salary will be QAR 4500 – QAR 5000 + OT + Annual leaves + Flight tickets + Medical coverage + other benefits as per the company policy
If you meet the above mentioned requirements, please forward your resumes

Maintenance manager Qatar

More Details

Company : Venture Gulf Engineering WLL

Country : Qatar

Description : Manage Electrical Rotating Machines Repair shop equipments, manpower, facility and operations in a professional manner.

• Capable to instruct rebuild of defective mechanical parts in electric motors, generators, and related equipment, using hand tools and power tools.

• Inspect and test equipment in order to locate damage or worn parts and diagnose malfunctions, or read work orders or schematic drawings to determine required repairs.

• Manage disassemble defective equipment and repair of parts, using gauges and tracing lathes. Record repairs required, parts used, and labor time.

• Supervise reassemble repaired electric motors to specified requirements and ratings, using hand tools and electrical meters. Rewind coils on cores in slots, or make replacement coils, using coil- winding machines.

• Supervise assembling electrical parts such as alternators, generators, starting devices, and switches, following schematic drawings and using hand, machine, and power tools.

• Shall have exposure on motor design codes like NEMA, ASME, AEMT, EASA and IECEx standards.

• Exhibit estimation experience in similar works, for Oil & Gas, Petrochemical and Cement plants.

• Ensures adequate Raw material, consumables and tools are available for planned work in order to meet the work requirements, reviews tool room stock levels to ensure that stocks are maintained at adequate levels for future work program.

Production Manager Qatar

More Details

The primary focus of the Production Manager is to oversee and manage all aspects of manufacturing operations within the carpentry, joinery, and woodworking facility. This entails maintaining stringent quality control measures to ensure adherence to standards and timelines, while fostering a culture of efficiency and productivity among staff members. The Production Manager will be responsible for orchestrating seamless coordination among various teams to optimize output and uphold the highest standards of craftsmanship.



 




  • Principal Responsibilities:




  1. W Revise all job orders from the clients including showrooms, Sales department, and direct customers. 

  2. Revise and sign and department Job order (Carpentry order / Painting order) for all received customer LPO or showroom purchase order 

  3. Prepare the production schedule and priorities. 

  4. Follow up with the engineering section to approve the materials and production method if needed. 

  5. Develop a new product to be displayed in showrooms to satisfy the market needs 

  6. Develop manufacturing processes and new methods to perform the task. 

  7. Continuous improvement of the worker skills by training or experience sharing. 

  8. Develop KPI's and standard time for repeated works. 

  9. Revise the costing done by the engineering department and to determine the profit margin for all new custom made items. (As per the approved procedure and authority) 

  10. Prepare the quotation requested by the clients as per the specifications or alternatives approved by the client 

  11. Continues revision and evaluation for the staff and to ensure that it satisfies the requirements. 

  12. Searching for anything can reduce the effort and improve the process (machine, tools, method, and raw materials 

  13. Direct follow-up side to side with the sales department for relatively big projects. 

  14. Follow up machine service and maintenance 

  15. Ensure the smooth flow of information and materials between all factory departments. 

  16. Continuously searching for reducing the costs of all production input (Materials, Labors, etc. ). 

  17. To ensure quality control sustainability.

  18. Prepare periodically production report.

  19. Ensure the safety of factory and labors, that includes labor accommodation

Maintenace Technician Qatar

Category : Maintenance
Description : Duties and Responsibilities • Installs pipes and fixtures, such as sinks and toilets, for water, gas, steam, air, or other liquids • Assembles fittings and valves for installation • Follows health and safety standards and complies with building codes • Perform routine maintenance of plumbing systems in residential and commercial buildings • Respond to plumbing calls from our general contracting team • Perform other tasks as delegated by direct superior Skills and Qualifications • At least secondary school or equivalent • Minimum 2 years of Experience • Filipino or Nepali only • With Transferable VISA and NOC • Accommodation and transportation will be provided by the company • Good communication and interpersonal skills • Send CV to jobsqatarfind2020@gmail.com Installs, maintains, and repairs pipes and fixtures associated with heating, cooling, water distribution, and sanitation systems in residential and commercial structures. Repair and inspects drainage and other plumbing systems for leakage.

Technicians Qatar

Lumatron Qatar WLL



Min 2 years Experience 

Daily execution of electrical maintenance (preventive and emergency) activities and related works as per instruction.

Co-ordination with technicians of other disciplines

Redaction of reports; understanding of technical specifications and drawings

Cabling, control panel, and general electrical maintenance

Perform on-site installation and commissioning, servicing maintenance and trouble shooting at site.

Should be well versed in local and international standards

To attend to technical inquiries and after sales services.

Any of the listed below is an add value



Experience in Central Battery System, Emergency Lighting

Lighting Control System

Telecom: CCTV, Access control, and Structured cabling

AV Systems: Internet Protocol Television (IPTV), Digital Signage & Video Wall.

trouble shooting for System EST (Edwards), Siemens etc.

Dismantling/reassembling of electromechanical equipment

Maintenance manager Qatar

Company : Al Habari Group

Country : Qatar

Description : 

Location: Al Khor



Minimum 4-5 yrs of experience in handling rental and maintenance of heavy equipment in Qatar



Qualification: minimum graduate with computer skills



With transferable visa & valid driving license in Qatar

Cleaning professionals Qatar

Country : Qatar
Description : If you are an experienced cleaner and look for a job in a busy but friendly environment, please review the rest of this job ads by IFI!
Who is IFI-Qatar:
International First Idea Co. Ltd, IFI, an IDP (IDP.com) affiliate, will commence its business operations in Doha, Qatar in three main functions: IELTS Exam Centre, IELT preparation and English Training Institute, Student Placement Centre.
- The IFI IELTS Exam Centre will offer a range of innovative, high quality and cost-effective services to an array of clients including students, professionals, English instructors and organizations.
- Constituently focus on of innovative, highly quality and cost- effective services for a range of clients including students, professionals, English teachers, organizations.
- Create a safe but at the same time challenging environment for our staff to prosper and grow in tandem with customer expectations.
Main responsibility
• Perform heavy cleaning duties, such as cleaning floors, dusting, sweeping, vacuuming, mopping, cleaning ceiling vents, restroom cleaning, shampooing rugs/ Steam-cleaning, washing walls, windows and glass partition, Clean and polish furniture and fixtures and removing rubbish.
• Conducting routine maintenance activities, notifying management of need for repairs, and cleaning sidewalk.
• Maintain the keys and ensuring of the security of the facility
• Monitoring the stock and supply designated facility areas including purchasing supplies and equipment needed for cleaning and maintenance duties
• Perform and document routine inspection and maintenance activities
• Move heavy furniture, equipment, and supplies, either manually or by using hand trucks.
• Carry out special projects
• Make adjustments and minor repairs
• Cooperate with the rest of the staff
• Follow all health and safety regulations
Eligibility Criteria
-Experience in conducting similar role is mandatory
- Ability to communicate in clear, spoken English.
-Having a car and driving license is a bonus
- Excellent customer service skills
- Flexibility, reliability and being comfortable working under pressure and multi-tasking
-An eye for detail is essential.

Pipe fitter Qatar

Country : qatar

Description : we need pipe fitter ( especially HDPE and UPVC pipe)

Salary negotiable

working hours 10 hours

Accommodation free

Food Allowance

Working site KATAARA hotel Lusail 

Facilities & Maintenance Consultant

We are looking for Facilities & Maintenance Consultant having 10 years of Experience in Marine or Shipyard.

Experience Required :

Maintenance of Shipyard Equipment & Machinery
Shipyard Facility & Infrastructure Management
Requirements :

Available to join Immediately
With QID (Secondment)
Thank You

Service manager Qatar

Baker Hughes



As a member of our talent community, you will be amongst the first to get exclusive news about Baker Hughes, various cool projects we are working on, our employee success stories and new job opportunities you may be interested in. Essential Responsibilities: • Qualified in accordance with the Baker Hughes competency and training requirements. • Knowledgeable with all aspects of directional well planning including types of directional well profiles, fundamental concepts of directional well planning, and good knowledge of directional drilling downhole tools. • Knowledgeable with all available directional equipment, services, and resources. • Proficient in Well Architect planning software and other software as directed by COMPANY based on the CONTRACT requirements. • Capable of coordinating all required activities and possess strong analytical and technical skills. • Fluent in the English language (i.e., speaking, reading, and writing) • Proficient and knowledgeable with the Baker Hughes Quality Management System. Work Experience Qualifications/Requirements: A senior Directional Driller/Engineer with a minimum of ten (10) years of experience in providing DD/MWD/LWD Services including at least three (3) years of experience as a Directional Drilling Coordinator. • Please remember that joining the Talent Community is not an application for any specific job at Baker Hughes but to have the privilege of being considered for an opportunity that suits your profile on priority

HVAC Technician Qatar

Company : Climatech contracting and ac maintenance

Country : qatar

Description : Need HVAC technician 

Nee Well Experienced HVAC technician 

Driving license should be advantage

Salary should be discuss on interview

Service engineer Qatar

Country : Qatar

Description : Service Engg- Heavy Equipment



Should be a Mechanical/Mechatronics Engineer with 3 to 5 years relevant experience in the Heavy Equipment industry Required to provide expert technical engineering support for equipment maintenance and repair for aerial work platforms. Need to possess hand on experience of machinery like scissor lift, boom lift and man lift.

Water technician Qatar

Country : qatar

Description : We are #hiring Chiller Water Technician



The Chiller Technician is responsible for operating, maintaining, and performing repairs on assigned HVAC and Refrigeration equipment and controls, chilled water systems, boilers, and various other mechanical, electrical, and building systems in such a manner as to ensure optimal client relations.

The Chiller Technician may also perform other tasks as needed

Service engineer Qatar

Company : United Gulf Access

Country : Qatar

Description : SERVICE ENGINEER - HEAVY EQUIPMENT

•Should be a Mechanical/Mechatronics Engineer with 3 to 5 years relevant experience in the Heavy Equipment industry.

•Required to provide expert technical engineering support for equipment maintenance and repair for aerial work platforms. '

•Need to possess hand on experience of machinery like scissor lift, boom lift and man lift.



•Salary: QAR 7,000.00 

HVAC Technicians Qatar

Company : Dhamac Group

Country : Qatar

Description : URGENT Hiring! 



We are looking for a Candidate For American Federal Government Client.

Positions: (25)HVAC Technician, (8)Plumber Technician, (12)Electrical Technician.

A 3-6 months project and could be hired on a 1-2 years temporary contract basis.

Suitable for In-country applicants and affected by the recession due to Pandemic.

Preferably with a secondment from the current company and with experience from positions mentioned above.

Put your desired position on email subject with salary expectation. Mention your current visa status and ID expiration.

Send your application

Professional cleaners Qatar

ountry : Qatar

Description : We need a professional cleaner Urgently in Doha for our Leisure Fitness Club. Kindly send your resumes at greenwallksa2020@gmail.com



The Custodian will be responsible for the overall cleanliness of all areas of the facility to ensure a positive member experience.





Essential Duties and Responsibilities:



Thoroughly clean and sanitize restrooms, locker room areas, fitness equipment and gym floor.

Stock locker rooms with proper supplies/paper products

Report any broken or missing amenities or equipment (Toilets, faucets, showers, hairdryers, gym equipment etc.) to the Club Manager

Carry out heavy cleansing tasks and special projects

Performing and documenting routine inspection and maintenance activities  

Clean, stock and supply designated facility areas (dusting, sweeping, vacuuming, mopping, cleaning ceiling vents, restroom cleaning etc)

Notify management of occurring deficiencies or needs for repairs

Make adjustments and minor repairs

Stock and maintain supply rooms

Follow all health and safety regulations





Qualifications/Requirements:



Custodial experience is preferred

Punctuality and reliability is a must

Honesty and exceptional work ethic

Ability to solve problems independently

Demonstrate diplomacy in all interactions while using appropriate behaviour and language

Proven working experience as a Cleaner

Ability to handle heavy equipment and machinery

Knowledge of cleaning chemicals and supplies

Familiarity with Material Safety Data Sheets

Integrity

High school degree

Must be 18 years of age or older

HSE Officers Qatar

Staunch Trading and Contracting



Description : Urgent Hiring HSE Officers Qatar gas project.



Must have 5 to 6 years Ras Gas Experience

Job description: 

Administrate safety orientation, build safety culture among workers assigned to tasks

To support site safety audit, inspection, gas detector management

To support inspection of safety equipment(i.e. wind socks, safety shower, Breathing Air Sets (SCBA & EEBD's), Gas Detectors)

Permit to work monitoring.

Any other related duties of HSE Officer. 



Locally available in Qatar

Valid QID Mandatory 

Nebosh& RAS Gas experience certificates mandatory

DVC form mandatory for gate pass







Interested candidates can send their CV

Electrical technician Qatar

Country : Qatar
Description : A leading MNC based in Doha requires an electrical technician urgently. The desired candidate must meet the following mandatory requirements.
REQUIREMENTS:
1. Good communication skill
2. Diploma in Electrical field
3. 3+ Years of Electrical installation and maintenance experience
4. Valid Qatar driving license
5. Transferable NOC
6. Date of joining : 23/08/2020
REMUNERATION:
Salary will be QAR 4500 – QAR 5000 + OT + Annual leaves + Flight tickets + Medical coverage + other benefits as per the company policy
If you meet the above mentioned requirements, please forward your resumes

Maintenance manager Qatar

Company : Venture Gulf Engineering WLL

Country : Qatar

Description : Manage Electrical Rotating Machines Repair shop equipments, manpower, facility and operations in a professional manner.

• Capable to instruct rebuild of defective mechanical parts in electric motors, generators, and related equipment, using hand tools and power tools.

• Inspect and test equipment in order to locate damage or worn parts and diagnose malfunctions, or read work orders or schematic drawings to determine required repairs.

• Manage disassemble defective equipment and repair of parts, using gauges and tracing lathes. Record repairs required, parts used, and labor time.

• Supervise reassemble repaired electric motors to specified requirements and ratings, using hand tools and electrical meters. Rewind coils on cores in slots, or make replacement coils, using coil- winding machines.

• Supervise assembling electrical parts such as alternators, generators, starting devices, and switches, following schematic drawings and using hand, machine, and power tools.

• Shall have exposure on motor design codes like NEMA, ASME, AEMT, EASA and IECEx standards.

• Exhibit estimation experience in similar works, for Oil & Gas, Petrochemical and Cement plants.

• Ensures adequate Raw material, consumables and tools are available for planned work in order to meet the work requirements, reviews tool room stock levels to ensure that stocks are maintained at adequate levels for future work program.

Production Manager Qatar

The primary focus of the Production Manager is to oversee and manage all aspects of manufacturing operations within the carpentry, joinery, and woodworking facility. This entails maintaining stringent quality control measures to ensure adherence to standards and timelines, while fostering a culture of efficiency and productivity among staff members. The Production Manager will be responsible for orchestrating seamless coordination among various teams to optimize output and uphold the highest standards of craftsmanship.



 




  • Principal Responsibilities:




  1. W Revise all job orders from the clients including showrooms, Sales department, and direct customers. 

  2. Revise and sign and department Job order (Carpentry order / Painting order) for all received customer LPO or showroom purchase order 

  3. Prepare the production schedule and priorities. 

  4. Follow up with the engineering section to approve the materials and production method if needed. 

  5. Develop a new product to be displayed in showrooms to satisfy the market needs 

  6. Develop manufacturing processes and new methods to perform the task. 

  7. Continuous improvement of the worker skills by training or experience sharing. 

  8. Develop KPI's and standard time for repeated works. 

  9. Revise the costing done by the engineering department and to determine the profit margin for all new custom made items. (As per the approved procedure and authority) 

  10. Prepare the quotation requested by the clients as per the specifications or alternatives approved by the client 

  11. Continues revision and evaluation for the staff and to ensure that it satisfies the requirements. 

  12. Searching for anything can reduce the effort and improve the process (machine, tools, method, and raw materials 

  13. Direct follow-up side to side with the sales department for relatively big projects. 

  14. Follow up machine service and maintenance 

  15. Ensure the smooth flow of information and materials between all factory departments. 

  16. Continuously searching for reducing the costs of all production input (Materials, Labors, etc. ). 

  17. To ensure quality control sustainability.

  18. Prepare periodically production report.

  19. Ensure the safety of factory and labors, that includes labor accommodation