Ae.centiel
Country : Qatar
Description : We are looking for an experienced Sales Engineer to join our team in Qatar.
Requirements:
• Degree in Electrical Engineering
• 5 to 7 years of UAE experience in UPS systems and related products
• Candidates having valid UAE driving license preferred
Suitable candidates can send their cv
The engineer will perform a broad cross section of complex technical and administrative activities requiring extensive experience and specialization in Quality Control and Quality Assurance inspection of construction work. Job Duties: • Analyzes applicable codes, standards and project contract documents and monitors construction activities to ensure compliance. • Monitors and/or evaluates electrical tests and inspections such as ground-fault, ground resistance, insulation resistance, polarity, continuity, capacity, load and other electrical field tests as required. Able to interpret single-line and/or schematic electrical drawings as well as plans and specifications. • Field checks installation and location of electrical equipment, electrical duct, conduit, cable, panels and other components of the electrical system being installed. Assures compliance with approved submittals. • Monitors all electrical installations to assure circuitry, phasing equipment and grounding adhere to construction documents and National Electric Code requirements. • Provides general inspection on all construction and subcontractor work to assure a safe and workmanlike operation. • Verifies equipment settings, alignment, testing and energization requirements. • Evaluates and monitors adequacy of Contractor Quality Control (CQC) programs. Minimum Requirements • Minimum 8 years of work experience on construction and supervision projects. • Candidate must be MMUP registered. Preferred Qualifications • Diploma / Bachelor Degree in relevant Engineering field (i.e. Civil, Mechanical, Electrical, Structural etc.)
Company : Focus Design Partners
Country : Qatar
Description : For applicant currently living in Qatar a MMUP License, NOC & Transferable is REQUIRED.
Mechanical Engineer shall provide leadership and comprehensive mechanical engineering support in planning developing and supervising mechanical installations, operations and building equipment. Capable of reviewing contractor’s submittals & proposed materials. Has full understanding of firefighting & building safety codes: i.e NFPA 101, Ashrea.. etc
Job description / Role
• Developing sustainable building services designs for commercial, educational, health care facilities, residential, tall tower, Infrastructure and mixed-use developments projects.
• Knowledge of ventilation and air conditioning systems and a successful track record of delivering detailed designs to the highest international standards.
• Performing engineering evaluations, Design reports, conceptual and final design.
• Have the basic knowledge of other mechanical systems, including but not limited to Firefighting, plumbing and gas distribution systems.
• Preparation of mechanical engineering calculation in support of systems’ design.
• Evaluating and analyzing statistical data, customer design proposals, specifications and manuals to determine feasibility of design or application.
• Working knowledge of various building services design codes such as British Standards, ASHRAE, NFPA, UPC,IPC, IMC and other International design codes. Knowledge in local Codes in Qatar QCS and QCDD has an added value.
• Interfacing, coordinating and working with the Arch, Structural and MEP design team in a professional manner to achieve project goals.
Requirements
• Bachelor’s Degree in Mechanical Engineering.
• 5 to 7 years of experience, with Major Exp into HVAC Design.
• Excellent communication and time management skills.
• Experience using computer HVAC design tools, AutoCAD, Revit MEP is essential.
Company : HBK REFERANS Trading Company
Country : QATAR
Description : Design Engineer Objectives:
Provide safe and most technically effective solutions for client and most cost effective for HBK REFERANS
Meet project deadlines to ensure excellent quality of service
Key Tasks and Responsibilities:
Design of customized concrete forming/shoring solutions
Develop computerized drawings, material lists and calculations
Work closely with sales team and customer to understand project needs and develop the most suitable project solutions
Communicate effectively between all PERI departments and work together to provide excellent customer experience
Provide technical support to customers
Comply with agreed company processes and procedures
Perform duties in compliance with overall company goals
Requirements:
Bachelor's degree in Civil or Construction Engineering
One year of relevant experience preferred
Ability to read and understand blueprints
Excellent communication and interpersonal skills with the ability to communicate effectively with all levels of the organization, as well as with customers
AutoCAD experience required
Working knowledge of Microsoft Office
Continuous improvement and quality mindset
Key accountabilities for this position include but are not limited to: • Technical Delivery: • Review reports and records. • Manage non-conforming works, generating reports and corrective actions and coordinating responses. • Performs other responsibilities associated with this position as may be appropriate. • Assist with the preparation of cost estimates for project design and construction. • Collaboration and working as part of a team • Work in conjunction with engineers to solve project design problems, performing basic design calculations as required. • Work under the direction of the Technical Lead; • Conduct field inspections under the supervision of the Technical Lead, and Client Engineer representative. • Liaison with teams working remotely from other parts of theworld to facilitate completion of tasks, and project. • Good communicator. • Client Service Management • Internal and external client liaison • Ability to build and maintain lasting and positive relationships • Experience in utility diversions and management • Follow safe work practices and adhere to company guidelines and policies for planning and executing work in a safe manner. • Complete all work in line with Stantec Core Values and in accordance with the Stantec Quality Systems and Project Quality Procedures. • Design for safety, i.e. Construction Design Management. • Other duties as requested from time to time by the Lead/ Supervisor Civil Engineer. Title: Site Mechanical Engineer (Pumping Stations) Qualifications: • 10 years experience with infrastructure, especially STPs and Pumping stations • 15 years of total experience • Degree in Mechanical Engineering from a recognized university • Experience with testing and commissioning of sewage pumping stations or STPs • Preferred 5 years employment with international consultant
Description : Plans, schedules and supervises the activities of assigned personnel in the workshop. Performs supervisory functions at the level established by management. Ensures that QA/QC function on all critical repairs and overhaul of plant and equipment is well maintained and adequately performed. Degree in B.E. Mechanical - Eight (8) years’ experience in a workshop in the gas, oil and refining or petrochecmical industry ncluding at least 3 years supervisory experience. Preferably with exposure to general Electrical/Instrument knowledge. -Computer literate and use of a computerized maintenance management system. - Familiar with all hazards and safety precautions of workshop related. -Good communication skills. Speaks and write fluent in English.
Company : Novel Overseas Corporation
Country : Qatar
Description : Project Lead/Manager
Requirements and key responsibilities:
Min. 5 years of experience project managing multi-stakeholder initiatives, experience working with government stakeholders and with workers welfare programs.
Bilingual – English and Arabic speaker.
Male candidate as travel to labor camps may be required.
Key responsibilities:
• Create, update and maintain project plan
• Report on the project progress to department and project director (weekly, monthly and quarterly)
• Keep activities on track
• Manage weekly team meetings (invite, agenda, minutes etc.)
• Support development of roles and responsibilities
• Receive reports from all team members (as per their mandate)
• Develop any required RFQs and RFPs
• Process payments and keep EPM updated
• Take responsibility for marketing activities
• Maintain and manage risks register
• Develop Quality Assurance Process document
• Support the project director
• Organize all steering committee meetings as per approved governance structure.
• Document steering committee meetings (agendas, MoM) and follow on agreed action items and decisions
• Other tasks as assigned by Section Head or Department Director
A Leading (A) Grade local engineering consultancy firm based in Doha is seeking to hire a Site Electrical Engineer with minimum of 10 years of practical experience preferably in consultancy firm with MMUP certificate.
Requirements
- Bachelor Degree in Electrical Engineering.
- Experience From (10-15) years / and in Gulf 3 years at least.
- Must have MMUP certificate
- Have Experience In Consultants Engineering Companies.
- Available to join immediately is preferred
About the Company
Dara Engineering Consultants was founded in 2000 and it has become one of the leading consultancy firms in Qatar with Great A classification under the Professional Consultants Committee.
Dara is having highly specialized teams in Architectural, Interior Design, Landscape Architectural, Urban Planning, Quantity Survey, Cost Control, Structural, Electrical, Mechanical and Construction management of various kinds of projects.
Company : Lotus Trading & Contracting Co.
Country : Qatar
Description : TRAFFIC ENGINEERS . Applicants must be a graduate of a Bachelor's Degree in Civil Engineering or Transport Engineering, must be knowledgeable of Transport Planning & Workzone Traffic Management, and a resident of Doha with transferable work visa.
Job Description :
Looking for an experienced Civil Engineer in Qatar.
Job Details:
• Develops original plans, design analyses, and specifications, for complex structural building design.
• Drafts technical specifications, design criteria and drawings in conjunction with designs generated in-house.
• Reviews incoming directives, scopes of work, and criteria for the structural building design features.
• Understand the design in terms of function ability, cost, time, quality and safety
• Develop project control systems and finalization of project organization chart.
• Co-ordination and follow-up with architect and other design consultant for their inputs
Job Requirements:
• Good communication Skills.
• Minimum 5 year experience is required.
• Management Skills.
• IT Skills.
• Be a smart and presentable person.
Company : Al Jazeera Street, Bin Mahmoud
Country : Qatar
Description : - An Engineering Consultancy Company.
- Minimum 2-3 years experience.
- Male.
- Salary will be discuss upon interview.
Note : Only shortlisted candidates will be contacted.
AECOM is seeking a Mechanical Construction Engineer for an anticipated position supporting a construction effort in the country of Qatar. The mechanical engineer will research and analyze data such as customer design proposal, specifications, and manuals to determine feasibility of design or application. Provide mechanical design service including determination of HVAC loads, equipment selection, duct sizing and routing, interior plumbing design, exterior plumbing design, and fire protection systems. The work location for this position in Qatar. • Research and analyze data such as customer design proposal, specifications, and manuals to determine feasibility of design or application. • Design products or systems in support of facilities' infrastructure, research, or maintenance requirements. • Coordinate, troubleshoot, and approve installation activities as inspection services to ensure products and systems conform to engineering design and specifications. • Establish mechanical engineering design criteria and provide guidance and evaluation for facility projects; determine HVAC loads, complete equipment selection, perform duct sizing and routing, design interior/exterior plumbing and fire protection systems. • Able to serve as the alternate project lead in the absence of the site manager. • Perform all other position related duties as assigned or requested.
Dacon Engineering is seeking highly motivated and qualified individuals from the Middle East, Africa, Eastern Europe, South America and Asia with the passion to contribute or provide excellent service in the North America Zone.
The job opportunities require highly skilled individuals with reasonable experience and competence to work in Dacon Oil installations as well as facilities.
Immigrants all over the world move to the UAE for a desirable standard of living with high earnings and better career growth opportunities. Irrespective of the skill-sets and the occupation they have work experience, offers attractive pay scales to lead a stable life in the country.
Country : Qatar
Description : QA/QC Engineer
Construction experience is must.
Must have QA/QC experience
We have a requirement of 2 Civil QA/QC Engineers. The candidate should meet the following requirements:
1. Should be a Civil Engineering Degree holder
2. Should have overall experience of 7-8 years
3. Should have GCC experience of 3-4 years
4. Should have worked in Building construction of Residential & Commercial buildings
5. Should have worked with Contracting companies.
Grcmasters
Country : qatar
Description : The Quality Engineer's responsibilities include designing quality standards, inspecting materials, equipment, processes, and products, developing quality control systems, and determining corrective actions.
Quality Engineer Responsibilities:
· Ensuring that the activities required for the effective operation of the quality management system are planned, implemented, controlled and their progress monitored.
· Reporting quality activities to the Project Manager and General Manager.
· Issuing monthly QA/QC report within the first week of the following month.
· Inspecting and testing materials, equipment, processes, and products to ensure quality specifications are met.
· Collaborating with operations managers to develop and implement controls and improvements.
· Ensuring that workflows, processes, and products comply with safety regulations.
· Investigating and troubleshooting product or production issues.
· Approves incoming materials by confirming specifications; conducting visual and Measurement tests; rejecting and returning unacceptable materials.
· Approves in-process production by confirming specifications; conducting visual and measurement tests; communicating required adjustments to production supervisor.
· Approves finished products by confirming specifications; conducting visual and measurement tests; returning products for re-work; confirming re-work.
· Documents inspection results by completing reports and logs; summarizing re-work and waste; inputting data into quality database.
· Conducting In-House Test, Preparing MIX-Designs, Preparing MIR documents for material.
· Review the production Drawings before the drawing is forwarded to for production.
· Preparing IR Documents for respective material after installation on site.
· Responsible of assuring the Quality of Finished Products and Installation up to the standard
· Keeping the record of the NCR and Corrective Actions
Quality Engineer Requirements:
· Degree in quality, industrial, or mechanical engineering.
· 2 plus years of experience in quality engineering, quality assurance, or a similar role.
· Knowledge of the current trends and latest advancements in GRC, GRP & GRG
· Knowledge of production and testing.
· Knowledge of the international standards used in the GRC and GRP (like PCI, ASTM , GRCA, NPCAA)
· Strong communication and interpersonal skills.
Job Description :
Urgently looking for an experienced Mechanical Engineer in Qatar.
Job Deletes:
• Prepares product reports by collecting, analyzing, and summarizing information and trends.
• Provides engineering information by answering questions and requests.
• Maintains product and company reputation by complying with government regulations.
• Keeps equipment operational by coordinating maintenance and repair services; following manufacturer’s instructions and established procedures; and requesting special services.
• Maintains system and product data base by writing computer programs and entering data.
• Completes projects by training and guiding technicians.
Job Requirements:
• Minimum Diploma in Mechanical Engineering.
• Three years experience in same field.
• Only Male need to apply.
• Creativity and analytical skills.
GRC Masters
Category : Engineering
Description : The Quality Engineer's responsibilities include designing quality standards, inspecting materials, equipment, processes, and products, developing quality control systems, and determining corrective actions. You will also work with managers and supervisors to implement quality measures. A successful Quality Engineer should have excellent troubleshooting skills and be able to ensure that processes and products consistently meet established quality standards. Quality Engineer Responsibilities: • Developing and implementing quality standards. • Developing and implementing quality control systems. • Monitoring and analyzing quality performance. • Inspecting and testing materials, equipment, processes, and products to ensure quality specifications are met. • Collaborating with operations managers to develop and implement controls and improvements. • Ensuring that workflows, processes, and products comply with safety regulations. • Investigating and troubleshooting product or production issues. • Developing corrective actions, solutions, and improvements. • Reviewing codes, specifications, and processes. Quality Engineer Requirements: • Degree in quality, industrial, or mechanical engineering. • ASQ certification preferred. • 2+ years of experience in quality engineering, quality assurance, or a similar role. • Experience coding and using QA software tools and processes. • Strong communication and interpersonal skills. • Strong analytical and problem-solving skills. • Excellent project management skills. Note : salary negotiable
Job Description :Looking for an experienced Planning Engineer in Qatar.Job Details:- Resolves difficult interoperability problems to obtain operation across all platforms including e-mail, files transfer, multimedia, teleconferencing and the like.- Configures systems to user environments.- Supports acquisition and implementation of hardware and software as well as subcontractor services. - May act as a technical project leader or provide work leadership for lower level employees.Job Requirements:At least UPDA Trainee Minimum 5 years’ experience IT skill.Bachelors degree in Engineering Transferable visa with NOC.
Honeywell----
Your main duties will include the overall co-ordination, leading and management of a team of engineers; efficient design and delivery of the IBMS, DVM and Temaline Security systems; network infrastructure design, installation and commissioning support, and 3rd party product integration with EBI to include EBI support and trouble shooting with the ability to complete basic log file analysis. EBI Custom Application Programming (i.e. Interface with Peoplesoft, SAP, CHOM, Identity management). DVM and Access Control Systems design, installation, commissioning support and integration with other systems. Created with SnapFacilitate issue identification and analysisInvestigate and resolve technical issuesBuild relationships with customersLead Team AlignmentYOU MUST HAVE Bachelor's degree, or equivalent. Some experience in the field. Extensive experience working in a projects environment, with comprehensive on-site knowledge Advanced knowledge of networking, database technology, integration protocols, and current trends in the industry. Proven track record in a project design and engineering capacity involved in the delivery of technology based projects WE VALUE Willingto develop extensive product knowledge in formal training, and in “on the job†environments, working with latest Honeywell technology. Extensive customer facing experience Experience in the industry is preferred Excellent interpersonal and verbal & written communication skills Strong continuous improvement mindset, strong leadership impact Experience with Salesforce.com and SharePoint Demonstrated experience with Knowledge Management & Call Center Management Good administration skills Demonstrated management skills INCLUDES Continued Professional Development ADDITIONAL INFORMATION Category: Engineering
Blue Wings----
Description : 3 - 5 years experienced Environmental Engineer required.
Environmental qualification is mandatory. Other certifications will be an added advantage.
Middle East/Qatar experience is 1st preference.
Need to be on your own (Freelancer) Qatar visa. Should be with valid QID.
Willing to work on Manpower Supply.
Working hours 10 hours per day, 6 days a week.
Duration, 1 month and extendable.
With an expected salary?
NES Qatar-------
To qualify, candidate must possess the following qualification and experience:
Qualification: Master degree in structural system engineering,
Experience: minimum 10 years’ experience as structural engineer in structural field in Oil and Gas activities. Extensive experience in structural engineering with relevant experience within the offshore oil and gas production industry,
Experience in offshore facilities or FSO, FPSO is a plus,
Available for technical missions worldwide,
Familiar with Total GS, MOQ standards and relevant codes and standards,
Language: Fluent English.
Computer literate, especially in structural calculation softwares.
Strong leadership skills and good communication skills.
Ability to work on projects in a complex and multicultural environment.
Good analytical skills.
• Execute mechanical, electrical & plumbing activities according to drawings and taking approvals from consultant and client time to time.
• In-charge of material submittals and take off for materials in the site.
• Oversee and monitor the installation and handling of HVAC System, Fire Fighting System, Plumbing & Drainage System.
• Develop inspection procedures and implement throughout the construction stages. Ensure Implementation of Quality standards and Control.
• Coordinate with electrical and civil contractors for better work results at worksite
• Carried out inspections related to material and mechanical activities completed on site.MEP Emgieen
- Should have at least 5 years of experience in big infrastructure project across the middle east region
- Should have diploma/degree in Mechanical or Electrical Engineering
- Fluent in English Language
- Should be able to relocate in Qatar immediately
Company : Commercial Places Co.
Country : Qatar
Description : Estimator
8 – 10 years experience
Highest Level of Education: Civil Engineer, Mechanical Engineer
CESM3 minimum requirement
with transferable NOC
can join immediately
Trags Engineering
Country : qatar
Description : We are hiring an ELV Estimation Engineer.
Desired Qualification:
Bachelor in Electronics/Electrical Engineering
Minimum 7 Years experience in ELV estimation / 10 years ELV installation
5 Years GCC experience must
Job Type: Full-time
Salary: From QAR10,000.00 per month
Company : Trimax Trading & Contracting WLL
Country : Qatar
Description : Required Sr. Engineers / Engineers / Executives / Support Staff (Various Functional Areas) - Long Term; Doha, Qatar.
Trimax Trading and Contracting W.LL (www.trimaxqatar.com) - A fast Growing Company into Electrical Contracting and Manpower Services is looking for the following professionals for Long Term Contract with our Clients.
CLIENTS: LEADING PROJECT MANAGEMENT/CONTRACTING COMPANIES IN QATAR.
Civil Engineers.
Site Engineers
Mechanical Engineers
Electrical Engineers
Structural Engineers.
Design Engineers
Planning Engineers
Procurement Engineers
QA/QC Engineers
Quantity Surveyors
ELV Project Engineers
Infra Inspectors
Structural Inspectors
Land Surveyors - Buildings /infra Experience
Geo-Technical Engineers
Civil Engineers- Piling experience
Architects / Architect-Engineer / Architectural Engineers
Interior Designers
Landscaping Engineers/Designers
Lifting Engineers/Supervisors- Sr./Jr.
HSE Engineers / Officers - NEBOSH / IOSH Certified.
CAD Designers- Civil, Electrical / MEP
Document Controllers
Purchase Officers/Assistants
HR/Admin Executives/Assistants.
Important:
10 + years experience and UPDA Grade A or B required for the Engineer positions with Project Management Company.
5-10 years experience required for positions with the Contracting Company.
Candidate with valid Qatar ID only need to apply.
Sponsorship transfer is NOT required.
Description : Greetings From Swan Global!!
We have an immediate opening for HVAC Engineer position!!!!
Should have 5+ Yrs of in Supervising and maintenance experience.
Salary QR 6500 a month
Must have QID .
Any nationality.
Degree /Diploma in Mechanical Engineering
Electrical Engineer, any nationality have experience 15 years in electrical construction shop drawings AutoCAD, BOQ, Pricing, design, Site work have UAE Driving
Company : Raha for Trading & Contracting
Country : Qatar
Description : Electrical Site Engineer
Generally responsible for implementations and monitoring of all electrical related works at site.
Estimates prepare and assign resources such as manpower, materials, consumables, equipment, tools, etc., required for all electrical and related works prior to execution.
Plans and analyses all possible construction methodologies and recommends the best options to the Asst. Project Manager for approval prior to execution at site.
Interprets construction drawings and studies the contract documents and applicable standards or specifications prior to execution of any jobs.
Manages directly and provide engineering and technical support to all the electrical workgroups at the site.
Plans the execution of all electrical related works and coordinates the works to mechanical and civil groups.
Coordinates with Client / Consultant’s representatives for any site instructions and inspection of works.
Provide support and co-ordinate with all concerned parties and ensure that the works are executed as per contract documents. Maintain an overview of entire project progress, quality control, and safety review on general construction practices accepted by standard code of practices, while continuing to attend to all technicalities review related to project.
Key Accountabilities / Responsibilities:
• Review the tender & IFC drawings and discrepancies to be reported to PM/RE of the project within a maximum 3 weeks of project commencement. Any constructability issues to be identified and reported. Any Request for Information related to specification, drawings, etc to be raised with the proposed solutions for confirmation from PM/RE/concern party.
• Attend the factory visits, witness third party tests as directed by PM.
• Review and comment on the Contractor material submission, shop drawings , record drawings, As built drawings, method statements, ITPs, 0&M manual, as per contract documents. Release the documents within 7 days.
• Review and provide comments on the baseline & other programme of works including schedule of submission of the project.
• Attend inspection request in the same day (whenever possible) and release the comments on the same day.
• Assist QS in monthly payment certification. Release the executed work percentages within 2 days of receipt of contractor submission.
• Assist PM and QS in drafting related Site Work Instruction. Support the team to advise on the impacts.
• Coordinate with other trade disciplines for smooth project progress.
• Assist PM in coordinating with the design team as and when required especially for confirming RFI responses.
• Safety Audit/inspection to be executed when AEB HSE personnel not available in the project.
• Train, guide direct and advise subordinate Civil Engineers to ensure that services delivered are according to the project requirements.
• Weekly or monthly brief work reports to be provided to PM as required.
• Assist in preparing Client project reports.
• Support the organization as required utilising the self multi skill knowledge/awareness.
• Provide lessons learnt during the project closure.
• Inspect and prepare snag list and do continuous follow up with the concerned to close the issued snag.
• Routine inspections to be carried out to ensure that the Contractor is executing the project as per the contract requirement. Issue ‘CAR’ or ‘NCR’ in consultation with RE/PM as and when non-compliance is noted.
Country : Qatar
Description : Description:
Hiring, Site Civil Engineer with the following qualification:
- Degree in civil engineering.
- Minimum 5 years of experience.
- Strong communication and interpersonal skills.
- Proven working experience as Site Engineer.
- Excellent knowledge of design and visualizations software such as AutoCAD, Civil 3D or similar.
- Fluent in dealing with the site supervision staff.
- Study project documents (Drawings, specifications, BOQ )
- Coordinate with the construction manager the required resources to achieve project scope according to the project baseline.
- Prepare daily inspection requests for the running activities.
- Prepare project daily report to the construction manager.
- jobs Inspect project sites to monitor progress and ensure conformance to design specifications and safety standards.
Ae.centiel
Country : Qatar
Description : We are looking for an experienced Sales Engineer to join our team in Qatar.
Requirements:
• Degree in Electrical Engineering
• 5 to 7 years of UAE experience in UPS systems and related products
• Candidates having valid UAE driving license preferred
Suitable candidates can send their cv
The engineer will perform a broad cross section of complex technical and administrative activities requiring extensive experience and specialization in Quality Control and Quality Assurance inspection of construction work. Job Duties: • Analyzes applicable codes, standards and project contract documents and monitors construction activities to ensure compliance. • Monitors and/or evaluates electrical tests and inspections such as ground-fault, ground resistance, insulation resistance, polarity, continuity, capacity, load and other electrical field tests as required. Able to interpret single-line and/or schematic electrical drawings as well as plans and specifications. • Field checks installation and location of electrical equipment, electrical duct, conduit, cable, panels and other components of the electrical system being installed. Assures compliance with approved submittals. • Monitors all electrical installations to assure circuitry, phasing equipment and grounding adhere to construction documents and National Electric Code requirements. • Provides general inspection on all construction and subcontractor work to assure a safe and workmanlike operation. • Verifies equipment settings, alignment, testing and energization requirements. • Evaluates and monitors adequacy of Contractor Quality Control (CQC) programs. Minimum Requirements • Minimum 8 years of work experience on construction and supervision projects. • Candidate must be MMUP registered. Preferred Qualifications • Diploma / Bachelor Degree in relevant Engineering field (i.e. Civil, Mechanical, Electrical, Structural etc.)
Company : Focus Design Partners
Country : Qatar
Description : For applicant currently living in Qatar a MMUP License, NOC & Transferable is REQUIRED.
Mechanical Engineer shall provide leadership and comprehensive mechanical engineering support in planning developing and supervising mechanical installations, operations and building equipment. Capable of reviewing contractor’s submittals & proposed materials. Has full understanding of firefighting & building safety codes: i.e NFPA 101, Ashrea.. etc
Job description / Role
• Developing sustainable building services designs for commercial, educational, health care facilities, residential, tall tower, Infrastructure and mixed-use developments projects.
• Knowledge of ventilation and air conditioning systems and a successful track record of delivering detailed designs to the highest international standards.
• Performing engineering evaluations, Design reports, conceptual and final design.
• Have the basic knowledge of other mechanical systems, including but not limited to Firefighting, plumbing and gas distribution systems.
• Preparation of mechanical engineering calculation in support of systems’ design.
• Evaluating and analyzing statistical data, customer design proposals, specifications and manuals to determine feasibility of design or application.
• Working knowledge of various building services design codes such as British Standards, ASHRAE, NFPA, UPC,IPC, IMC and other International design codes. Knowledge in local Codes in Qatar QCS and QCDD has an added value.
• Interfacing, coordinating and working with the Arch, Structural and MEP design team in a professional manner to achieve project goals.
Requirements
• Bachelor’s Degree in Mechanical Engineering.
• 5 to 7 years of experience, with Major Exp into HVAC Design.
• Excellent communication and time management skills.
• Experience using computer HVAC design tools, AutoCAD, Revit MEP is essential.
Company : HBK REFERANS Trading Company
Country : QATAR
Description : Design Engineer Objectives:
Provide safe and most technically effective solutions for client and most cost effective for HBK REFERANS
Meet project deadlines to ensure excellent quality of service
Key Tasks and Responsibilities:
Design of customized concrete forming/shoring solutions
Develop computerized drawings, material lists and calculations
Work closely with sales team and customer to understand project needs and develop the most suitable project solutions
Communicate effectively between all PERI departments and work together to provide excellent customer experience
Provide technical support to customers
Comply with agreed company processes and procedures
Perform duties in compliance with overall company goals
Requirements:
Bachelor's degree in Civil or Construction Engineering
One year of relevant experience preferred
Ability to read and understand blueprints
Excellent communication and interpersonal skills with the ability to communicate effectively with all levels of the organization, as well as with customers
AutoCAD experience required
Working knowledge of Microsoft Office
Continuous improvement and quality mindset
Key accountabilities for this position include but are not limited to: • Technical Delivery: • Review reports and records. • Manage non-conforming works, generating reports and corrective actions and coordinating responses. • Performs other responsibilities associated with this position as may be appropriate. • Assist with the preparation of cost estimates for project design and construction. • Collaboration and working as part of a team • Work in conjunction with engineers to solve project design problems, performing basic design calculations as required. • Work under the direction of the Technical Lead; • Conduct field inspections under the supervision of the Technical Lead, and Client Engineer representative. • Liaison with teams working remotely from other parts of theworld to facilitate completion of tasks, and project. • Good communicator. • Client Service Management • Internal and external client liaison • Ability to build and maintain lasting and positive relationships • Experience in utility diversions and management • Follow safe work practices and adhere to company guidelines and policies for planning and executing work in a safe manner. • Complete all work in line with Stantec Core Values and in accordance with the Stantec Quality Systems and Project Quality Procedures. • Design for safety, i.e. Construction Design Management. • Other duties as requested from time to time by the Lead/ Supervisor Civil Engineer. Title: Site Mechanical Engineer (Pumping Stations) Qualifications: • 10 years experience with infrastructure, especially STPs and Pumping stations • 15 years of total experience • Degree in Mechanical Engineering from a recognized university • Experience with testing and commissioning of sewage pumping stations or STPs • Preferred 5 years employment with international consultant
Description : Plans, schedules and supervises the activities of assigned personnel in the workshop. Performs supervisory functions at the level established by management. Ensures that QA/QC function on all critical repairs and overhaul of plant and equipment is well maintained and adequately performed. Degree in B.E. Mechanical - Eight (8) years’ experience in a workshop in the gas, oil and refining or petrochecmical industry ncluding at least 3 years supervisory experience. Preferably with exposure to general Electrical/Instrument knowledge. -Computer literate and use of a computerized maintenance management system. - Familiar with all hazards and safety precautions of workshop related. -Good communication skills. Speaks and write fluent in English.
Company : Novel Overseas Corporation
Country : Qatar
Description : Project Lead/Manager
Requirements and key responsibilities:
Min. 5 years of experience project managing multi-stakeholder initiatives, experience working with government stakeholders and with workers welfare programs.
Bilingual – English and Arabic speaker.
Male candidate as travel to labor camps may be required.
Key responsibilities:
• Create, update and maintain project plan
• Report on the project progress to department and project director (weekly, monthly and quarterly)
• Keep activities on track
• Manage weekly team meetings (invite, agenda, minutes etc.)
• Support development of roles and responsibilities
• Receive reports from all team members (as per their mandate)
• Develop any required RFQs and RFPs
• Process payments and keep EPM updated
• Take responsibility for marketing activities
• Maintain and manage risks register
• Develop Quality Assurance Process document
• Support the project director
• Organize all steering committee meetings as per approved governance structure.
• Document steering committee meetings (agendas, MoM) and follow on agreed action items and decisions
• Other tasks as assigned by Section Head or Department Director
A Leading (A) Grade local engineering consultancy firm based in Doha is seeking to hire a Site Electrical Engineer with minimum of 10 years of practical experience preferably in consultancy firm with MMUP certificate.
Requirements
- Bachelor Degree in Electrical Engineering.
- Experience From (10-15) years / and in Gulf 3 years at least.
- Must have MMUP certificate
- Have Experience In Consultants Engineering Companies.
- Available to join immediately is preferred
About the Company
Dara Engineering Consultants was founded in 2000 and it has become one of the leading consultancy firms in Qatar with Great A classification under the Professional Consultants Committee.
Dara is having highly specialized teams in Architectural, Interior Design, Landscape Architectural, Urban Planning, Quantity Survey, Cost Control, Structural, Electrical, Mechanical and Construction management of various kinds of projects.
Company : Lotus Trading & Contracting Co.
Country : Qatar
Description : TRAFFIC ENGINEERS . Applicants must be a graduate of a Bachelor's Degree in Civil Engineering or Transport Engineering, must be knowledgeable of Transport Planning & Workzone Traffic Management, and a resident of Doha with transferable work visa.
Job Description :
Looking for an experienced Civil Engineer in Qatar.
Job Details:
• Develops original plans, design analyses, and specifications, for complex structural building design.
• Drafts technical specifications, design criteria and drawings in conjunction with designs generated in-house.
• Reviews incoming directives, scopes of work, and criteria for the structural building design features.
• Understand the design in terms of function ability, cost, time, quality and safety
• Develop project control systems and finalization of project organization chart.
• Co-ordination and follow-up with architect and other design consultant for their inputs
Job Requirements:
• Good communication Skills.
• Minimum 5 year experience is required.
• Management Skills.
• IT Skills.
• Be a smart and presentable person.
Company : Al Jazeera Street, Bin Mahmoud
Country : Qatar
Description : - An Engineering Consultancy Company.
- Minimum 2-3 years experience.
- Male.
- Salary will be discuss upon interview.
Note : Only shortlisted candidates will be contacted.
AECOM is seeking a Mechanical Construction Engineer for an anticipated position supporting a construction effort in the country of Qatar. The mechanical engineer will research and analyze data such as customer design proposal, specifications, and manuals to determine feasibility of design or application. Provide mechanical design service including determination of HVAC loads, equipment selection, duct sizing and routing, interior plumbing design, exterior plumbing design, and fire protection systems. The work location for this position in Qatar. • Research and analyze data such as customer design proposal, specifications, and manuals to determine feasibility of design or application. • Design products or systems in support of facilities' infrastructure, research, or maintenance requirements. • Coordinate, troubleshoot, and approve installation activities as inspection services to ensure products and systems conform to engineering design and specifications. • Establish mechanical engineering design criteria and provide guidance and evaluation for facility projects; determine HVAC loads, complete equipment selection, perform duct sizing and routing, design interior/exterior plumbing and fire protection systems. • Able to serve as the alternate project lead in the absence of the site manager. • Perform all other position related duties as assigned or requested.
Dacon Engineering is seeking highly motivated and qualified individuals from the Middle East, Africa, Eastern Europe, South America and Asia with the passion to contribute or provide excellent service in the North America Zone.
The job opportunities require highly skilled individuals with reasonable experience and competence to work in Dacon Oil installations as well as facilities.
Immigrants all over the world move to the UAE for a desirable standard of living with high earnings and better career growth opportunities. Irrespective of the skill-sets and the occupation they have work experience, offers attractive pay scales to lead a stable life in the country.
Country : Qatar
Description : QA/QC Engineer
Construction experience is must.
Must have QA/QC experience
We have a requirement of 2 Civil QA/QC Engineers. The candidate should meet the following requirements:
1. Should be a Civil Engineering Degree holder
2. Should have overall experience of 7-8 years
3. Should have GCC experience of 3-4 years
4. Should have worked in Building construction of Residential & Commercial buildings
5. Should have worked with Contracting companies.
Grcmasters
Country : qatar
Description : The Quality Engineer's responsibilities include designing quality standards, inspecting materials, equipment, processes, and products, developing quality control systems, and determining corrective actions.
Quality Engineer Responsibilities:
· Ensuring that the activities required for the effective operation of the quality management system are planned, implemented, controlled and their progress monitored.
· Reporting quality activities to the Project Manager and General Manager.
· Issuing monthly QA/QC report within the first week of the following month.
· Inspecting and testing materials, equipment, processes, and products to ensure quality specifications are met.
· Collaborating with operations managers to develop and implement controls and improvements.
· Ensuring that workflows, processes, and products comply with safety regulations.
· Investigating and troubleshooting product or production issues.
· Approves incoming materials by confirming specifications; conducting visual and Measurement tests; rejecting and returning unacceptable materials.
· Approves in-process production by confirming specifications; conducting visual and measurement tests; communicating required adjustments to production supervisor.
· Approves finished products by confirming specifications; conducting visual and measurement tests; returning products for re-work; confirming re-work.
· Documents inspection results by completing reports and logs; summarizing re-work and waste; inputting data into quality database.
· Conducting In-House Test, Preparing MIX-Designs, Preparing MIR documents for material.
· Review the production Drawings before the drawing is forwarded to for production.
· Preparing IR Documents for respective material after installation on site.
· Responsible of assuring the Quality of Finished Products and Installation up to the standard
· Keeping the record of the NCR and Corrective Actions
Quality Engineer Requirements:
· Degree in quality, industrial, or mechanical engineering.
· 2 plus years of experience in quality engineering, quality assurance, or a similar role.
· Knowledge of the current trends and latest advancements in GRC, GRP & GRG
· Knowledge of production and testing.
· Knowledge of the international standards used in the GRC and GRP (like PCI, ASTM , GRCA, NPCAA)
· Strong communication and interpersonal skills.
Job Description :
Urgently looking for an experienced Mechanical Engineer in Qatar.
Job Deletes:
• Prepares product reports by collecting, analyzing, and summarizing information and trends.
• Provides engineering information by answering questions and requests.
• Maintains product and company reputation by complying with government regulations.
• Keeps equipment operational by coordinating maintenance and repair services; following manufacturer’s instructions and established procedures; and requesting special services.
• Maintains system and product data base by writing computer programs and entering data.
• Completes projects by training and guiding technicians.
Job Requirements:
• Minimum Diploma in Mechanical Engineering.
• Three years experience in same field.
• Only Male need to apply.
• Creativity and analytical skills.
GRC Masters
Category : Engineering
Description : The Quality Engineer's responsibilities include designing quality standards, inspecting materials, equipment, processes, and products, developing quality control systems, and determining corrective actions. You will also work with managers and supervisors to implement quality measures. A successful Quality Engineer should have excellent troubleshooting skills and be able to ensure that processes and products consistently meet established quality standards. Quality Engineer Responsibilities: • Developing and implementing quality standards. • Developing and implementing quality control systems. • Monitoring and analyzing quality performance. • Inspecting and testing materials, equipment, processes, and products to ensure quality specifications are met. • Collaborating with operations managers to develop and implement controls and improvements. • Ensuring that workflows, processes, and products comply with safety regulations. • Investigating and troubleshooting product or production issues. • Developing corrective actions, solutions, and improvements. • Reviewing codes, specifications, and processes. Quality Engineer Requirements: • Degree in quality, industrial, or mechanical engineering. • ASQ certification preferred. • 2+ years of experience in quality engineering, quality assurance, or a similar role. • Experience coding and using QA software tools and processes. • Strong communication and interpersonal skills. • Strong analytical and problem-solving skills. • Excellent project management skills. Note : salary negotiable
Job Description :Looking for an experienced Planning Engineer in Qatar.Job Details:- Resolves difficult interoperability problems to obtain operation across all platforms including e-mail, files transfer, multimedia, teleconferencing and the like.- Configures systems to user environments.- Supports acquisition and implementation of hardware and software as well as subcontractor services. - May act as a technical project leader or provide work leadership for lower level employees.Job Requirements:At least UPDA Trainee Minimum 5 years’ experience IT skill.Bachelors degree in Engineering Transferable visa with NOC.
Honeywell----
Your main duties will include the overall co-ordination, leading and management of a team of engineers; efficient design and delivery of the IBMS, DVM and Temaline Security systems; network infrastructure design, installation and commissioning support, and 3rd party product integration with EBI to include EBI support and trouble shooting with the ability to complete basic log file analysis. EBI Custom Application Programming (i.e. Interface with Peoplesoft, SAP, CHOM, Identity management). DVM and Access Control Systems design, installation, commissioning support and integration with other systems. Created with SnapFacilitate issue identification and analysisInvestigate and resolve technical issuesBuild relationships with customersLead Team AlignmentYOU MUST HAVE Bachelor's degree, or equivalent. Some experience in the field. Extensive experience working in a projects environment, with comprehensive on-site knowledge Advanced knowledge of networking, database technology, integration protocols, and current trends in the industry. Proven track record in a project design and engineering capacity involved in the delivery of technology based projects WE VALUE Willingto develop extensive product knowledge in formal training, and in “on the job†environments, working with latest Honeywell technology. Extensive customer facing experience Experience in the industry is preferred Excellent interpersonal and verbal & written communication skills Strong continuous improvement mindset, strong leadership impact Experience with Salesforce.com and SharePoint Demonstrated experience with Knowledge Management & Call Center Management Good administration skills Demonstrated management skills INCLUDES Continued Professional Development ADDITIONAL INFORMATION Category: Engineering
Blue Wings----
Description : 3 - 5 years experienced Environmental Engineer required.
Environmental qualification is mandatory. Other certifications will be an added advantage.
Middle East/Qatar experience is 1st preference.
Need to be on your own (Freelancer) Qatar visa. Should be with valid QID.
Willing to work on Manpower Supply.
Working hours 10 hours per day, 6 days a week.
Duration, 1 month and extendable.
With an expected salary?
NES Qatar-------
To qualify, candidate must possess the following qualification and experience:
Qualification: Master degree in structural system engineering,
Experience: minimum 10 years’ experience as structural engineer in structural field in Oil and Gas activities. Extensive experience in structural engineering with relevant experience within the offshore oil and gas production industry,
Experience in offshore facilities or FSO, FPSO is a plus,
Available for technical missions worldwide,
Familiar with Total GS, MOQ standards and relevant codes and standards,
Language: Fluent English.
Computer literate, especially in structural calculation softwares.
Strong leadership skills and good communication skills.
Ability to work on projects in a complex and multicultural environment.
Good analytical skills.
• Execute mechanical, electrical & plumbing activities according to drawings and taking approvals from consultant and client time to time.
• In-charge of material submittals and take off for materials in the site.
• Oversee and monitor the installation and handling of HVAC System, Fire Fighting System, Plumbing & Drainage System.
• Develop inspection procedures and implement throughout the construction stages. Ensure Implementation of Quality standards and Control.
• Coordinate with electrical and civil contractors for better work results at worksite
• Carried out inspections related to material and mechanical activities completed on site.MEP Emgieen
- Should have at least 5 years of experience in big infrastructure project across the middle east region
- Should have diploma/degree in Mechanical or Electrical Engineering
- Fluent in English Language
- Should be able to relocate in Qatar immediately
Company : Commercial Places Co.
Country : Qatar
Description : Estimator
8 – 10 years experience
Highest Level of Education: Civil Engineer, Mechanical Engineer
CESM3 minimum requirement
with transferable NOC
can join immediately
Trags Engineering
Country : qatar
Description : We are hiring an ELV Estimation Engineer.
Desired Qualification:
Bachelor in Electronics/Electrical Engineering
Minimum 7 Years experience in ELV estimation / 10 years ELV installation
5 Years GCC experience must
Job Type: Full-time
Salary: From QAR10,000.00 per month
Company : Trimax Trading & Contracting WLL
Country : Qatar
Description : Required Sr. Engineers / Engineers / Executives / Support Staff (Various Functional Areas) - Long Term; Doha, Qatar.
Trimax Trading and Contracting W.LL (www.trimaxqatar.com) - A fast Growing Company into Electrical Contracting and Manpower Services is looking for the following professionals for Long Term Contract with our Clients.
CLIENTS: LEADING PROJECT MANAGEMENT/CONTRACTING COMPANIES IN QATAR.
Civil Engineers.
Site Engineers
Mechanical Engineers
Electrical Engineers
Structural Engineers.
Design Engineers
Planning Engineers
Procurement Engineers
QA/QC Engineers
Quantity Surveyors
ELV Project Engineers
Infra Inspectors
Structural Inspectors
Land Surveyors - Buildings /infra Experience
Geo-Technical Engineers
Civil Engineers- Piling experience
Architects / Architect-Engineer / Architectural Engineers
Interior Designers
Landscaping Engineers/Designers
Lifting Engineers/Supervisors- Sr./Jr.
HSE Engineers / Officers - NEBOSH / IOSH Certified.
CAD Designers- Civil, Electrical / MEP
Document Controllers
Purchase Officers/Assistants
HR/Admin Executives/Assistants.
Important:
10 + years experience and UPDA Grade A or B required for the Engineer positions with Project Management Company.
5-10 years experience required for positions with the Contracting Company.
Candidate with valid Qatar ID only need to apply.
Sponsorship transfer is NOT required.
Description : Greetings From Swan Global!!
We have an immediate opening for HVAC Engineer position!!!!
Should have 5+ Yrs of in Supervising and maintenance experience.
Salary QR 6500 a month
Must have QID .
Any nationality.
Degree /Diploma in Mechanical Engineering
Electrical Engineer, any nationality have experience 15 years in electrical construction shop drawings AutoCAD, BOQ, Pricing, design, Site work have UAE Driving
Company : Raha for Trading & Contracting
Country : Qatar
Description : Electrical Site Engineer
Generally responsible for implementations and monitoring of all electrical related works at site.
Estimates prepare and assign resources such as manpower, materials, consumables, equipment, tools, etc., required for all electrical and related works prior to execution.
Plans and analyses all possible construction methodologies and recommends the best options to the Asst. Project Manager for approval prior to execution at site.
Interprets construction drawings and studies the contract documents and applicable standards or specifications prior to execution of any jobs.
Manages directly and provide engineering and technical support to all the electrical workgroups at the site.
Plans the execution of all electrical related works and coordinates the works to mechanical and civil groups.
Coordinates with Client / Consultant’s representatives for any site instructions and inspection of works.
Provide support and co-ordinate with all concerned parties and ensure that the works are executed as per contract documents. Maintain an overview of entire project progress, quality control, and safety review on general construction practices accepted by standard code of practices, while continuing to attend to all technicalities review related to project.
Key Accountabilities / Responsibilities:
• Review the tender & IFC drawings and discrepancies to be reported to PM/RE of the project within a maximum 3 weeks of project commencement. Any constructability issues to be identified and reported. Any Request for Information related to specification, drawings, etc to be raised with the proposed solutions for confirmation from PM/RE/concern party.
• Attend the factory visits, witness third party tests as directed by PM.
• Review and comment on the Contractor material submission, shop drawings , record drawings, As built drawings, method statements, ITPs, 0&M manual, as per contract documents. Release the documents within 7 days.
• Review and provide comments on the baseline & other programme of works including schedule of submission of the project.
• Attend inspection request in the same day (whenever possible) and release the comments on the same day.
• Assist QS in monthly payment certification. Release the executed work percentages within 2 days of receipt of contractor submission.
• Assist PM and QS in drafting related Site Work Instruction. Support the team to advise on the impacts.
• Coordinate with other trade disciplines for smooth project progress.
• Assist PM in coordinating with the design team as and when required especially for confirming RFI responses.
• Safety Audit/inspection to be executed when AEB HSE personnel not available in the project.
• Train, guide direct and advise subordinate Civil Engineers to ensure that services delivered are according to the project requirements.
• Weekly or monthly brief work reports to be provided to PM as required.
• Assist in preparing Client project reports.
• Support the organization as required utilising the self multi skill knowledge/awareness.
• Provide lessons learnt during the project closure.
• Inspect and prepare snag list and do continuous follow up with the concerned to close the issued snag.
• Routine inspections to be carried out to ensure that the Contractor is executing the project as per the contract requirement. Issue ‘CAR’ or ‘NCR’ in consultation with RE/PM as and when non-compliance is noted.
Country : Qatar
Description : Description:
Hiring, Site Civil Engineer with the following qualification:
- Degree in civil engineering.
- Minimum 5 years of experience.
- Strong communication and interpersonal skills.
- Proven working experience as Site Engineer.
- Excellent knowledge of design and visualizations software such as AutoCAD, Civil 3D or similar.
- Fluent in dealing with the site supervision staff.
- Study project documents (Drawings, specifications, BOQ )
- Coordinate with the construction manager the required resources to achieve project scope according to the project baseline.
- Prepare daily inspection requests for the running activities.
- Prepare project daily report to the construction manager.
- jobs Inspect project sites to monitor progress and ensure conformance to design specifications and safety standards.