DUTIES AND RESPONSIBILITIES: - Assume all responsibilities related to project hydraulic works such as design, analysis, etc. - Assist in design and provide recommendations hydraulic parameters of deep tunnel (Micro Tunnel, TBM etc.), pipes, conduits, design calculations and assessments etc. - Assist in external and internal coordination pertinent to hydraulic works and design. - Review, comment, recommend acceptance or otherwise on contractors’ and consultants’ submissions. - Liaise with utilities providers and stakeholders.
Purpose
• To supervise processes to produce contractual documentation
• To supervise and ensure that the production of contractual documents is done according to company procedure and ethics
• To produce contractual documents according to company procedure and ethics
• To provide a quality, cost-effective and time efficient contracts service to technical entities
• To participate in the optimization of the economic performance of the operations conducted
The Job holder executes the following contracts activities
• Prepare and maintain an up-to-date list of qualified contractors/suppliers/potential tenders/contracts with updated information in order to perform market studies
• Take a leading role in the validation of the contracts strategy through:
• Arranging and attending Contracts Committee Meetings
• Pre-qualifying bidders
• Defining target prices
• Defining criteria for evaluation
• Supervise the creation of CFT commercial documents
• Supervise the preparation and issue of the call for tender to contractors and suppliers on the bidders list
• Ensure the preparation and send out the dossiers of pre-consultation and Standard or Complex invitations to bid
• Verify the alignment with HSE clauses, Company rules, Procedures, Instructions and applicable legislation when issuing all technical contracts and when drafting contractual and commercial terms and conditions
• Verify the Terms & Conditions (standard, general and financial)
• Supervise the establishment of the technical contracts and contractual agreements, directly participate to the most complex contracts
• Participate in terms & conditions and commercial bid complex analysis and negotiations to ensure that a clear definition of responsibilities is developed
• Assume a leading role in RTAs through managing in Contract committees and award validation and RTA evaluations
• Handle the approval from authorities and partners, clarification of rights and obligation of signing parties and the signature process of formal documents
• Intervene in the settlement of claims and lawsuits, in relation with the Juridical, Insurance, Finance and company management by proposing strategies and actions and participating to the negotiations
• Ensure monitoring of on-going contracts status, participate in contract renewal and amendments discussions
• Review supplier performance
Requirements
• BSc Degree in Science or Commercial field or its equivalent
• International Experience Required
• Professional experience: 8 - 10 years’ post-graduate experience required. Minimum 8 years in the O&G industry. Minimum 6 years in contracts domain and minimum of 2 years as Senior Contract Engineer in the Company.
• Personal Abilities: Advanced Management, Advanced Human Relations, Problem Solving and Planning / organizing / coordinating / controlling
Country : Qatar
Description : Mechanical Engineer
Consultancy Company looking to hire a Mechanical Engineer.
Requirements/Qualifications:
• UPDA certified Grade A or B with 10 years’ Experience or more is a must.
• Familiar of FF, ventilation and HVAC. Plumbing.
• Designing.
• Site supervision & execution.
• Preferable experience in Consultancy.
• Salary Between Qar. 8,000 To Qar. 12,000
• Send your UPDA License along with your resume
Provide support and co-ordinate with all concerned parties and ensure that the works are executed as per contract documents. Maintain an overview of entire project progress, quality control, and safety review on general construction practices accepted by standard code of practices, while continuing to attend to all technicalities review related to project.
Key Accountabilities / Responsibilities:
• Review the tender & IFC drawings and discrepancies to be reported to PM/RE of the project within a maximum 3 weeks of project commencement. Any constructability issues to be identified and reported. Any Request for Information related to specification, drawings, etc to be raised with the proposed solutions for confirmation from PM/RE/concern party.
• Attend the factory visits, witness third party tests as directed by PM.
• Review and comment on the Contractor material submission, shop drawings , record drawings, As built drawings, method statements, ITPs, 0&M manual, as per contract documents. Release the documents within 7 days.
• Review and provide comments on the baseline & other programme of works including schedule of submission of the project.
• Attend inspection request in the same day (whenever possible) and release the comments on the same day.
• Assist QS in monthly payment certification. Release the executed work percentages within 2 days of receipt of contractor submission.
• Assist PM and QS in drafting related Site Work Instruction. Support the team to advise on the impacts.
• Coordinate with other trade disciplines for smooth project progress.
• Assist PM in coordinating with the design team as and when required especially for confirming RFI responses.
• Safety Audit/inspection to be executed when AEB HSE personnel not available in the project.
• Train, guide direct and advise subordinate Civil Engineers to ensure that services delivered are according to the project requirements.
• Weekly or monthly brief work reports to be provided to PM as required.
• Assist in preparing Client project reports.
• Support the organization as required utilising the self multi skill knowledge/awareness.
• Provide lessons learnt during the project closure.
• Inspect and prepare snag list and do continuous follow up with the concerned to close the issued snag.
• Routine inspections to be carried out to ensure that the Contractor is executing the project as per the contract requirement. Issue ‘CAR’ or ‘NCR’ in consultation with RE/PM as and when non-compliance is noted.
Job description: Required Design /Project coordinator for an International Engineering consultant for their main office.
Applicant should be Civil Engineering Graduate with 12+ years of experience in design coordination and project coordination with a reputed engineering consultant in to airport projects and experience in airfield, air side construction are desirable.
Carrier is a global provider of sustainable building and refrigeration solutions. Ever since the establishment of Carrier Solutions as a joint venture between Ensrv and Carrier Corporation in 1999, we have always kept our customers at the center of every product & service we offer and act swiftly to exceed their expectations. Our efforts to provide industry-leading solutions to improve home comfort, productivity and efficiency have never looked better as we continue to build best-in-class products and services to our innovative controls and building automation systems. OVERALL JOB PURPOSE: To achieve the booking and sales target for Service and Aftermarket Business Unit products (Service Agreements (Maintenance contracts), Service Repairs and Service modernization (retrofit/replacement)) with specified gross margin contribution and receivable days, in line with the company’s Environment, Health & Safety and quality standards. KEY ACCOUNTABILITIES: Order Intake: Work towards achieving the assigned order intake target in the respective categories of Service Agreements, Service Repairs and Service Modernisation, while complying with company Finance, Ethics and Sales Policies. Sales: Work towards achieving the assigned sales target in the respective categories of Service Agreements, Service Repairs and Service Modernisation, with aggressive internal and external customer follow-up. Gross Margin: Work towards achieving the assigned Gross Margin target in the respective categories of Service Agreements, Service Repairs and Service Modernisation by extensive customer negotiation and winning projects at the right price. Receivables: Be personally responsible for the pending receivables from customer and ensure that all outstanding balances are cleared in timely manner. Qualifications: • Bachelor’s degree in mechanical engineering or equivalent. • 3-5 years of experience in HVAC service sales. • Knowledge of HVAC industry in Qatar • Qatar Driving license • Good command of written and spoken English, Arabic is a plus. What do we offer? • Benefit from our great workplace environment and culture • Participate in incentive plans • Get development and learning opportunities • Get competitive salary and benefits, suitable to your seniority level Carrier is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class.
Key accountabilities for this position include but are not limited to: • Technical Delivery: • Review reports and records. • Manage non-conforming works, generating reports and corrective actions and coordinating responses. • Performs other responsibilities associated with this position as may be appropriate. • Assist with the preparation of cost estimates for project design and construction. • Collaboration and working as part of a team • Work in conjunction with engineers to solve project design problems, performing basic design calculations as required. • Work under the direction of the Technical Lead; • Conduct field inspections under the supervision of the Technical Lead, and Client Engineer representative. • Liaison with teams working remotely from other parts of theworld to facilitate completion of tasks, and project. • Good communicator. • Client Service Management • Internal and external client liaison • Ability to build and maintain lasting and positive relationships • Experience in utility diversions and management • Follow safe work practices and adhere to company guidelines and policies for planning and executing work in a safe manner. • Complete all work in line with Stantec Core Values and in accordance with the Stantec Quality Systems and Project Quality Procedures. • Design for safety, i.e. Construction Design Management. • Other duties as requested from time to time by the Lead/ Supervisor Civil Engineer. Title: Site Mechanical Engineer (Pumping Stations) Qualifications: • 10 years experience with infrastructure, especially STPs and Pumping stations • 15 years of total experience • Degree in Mechanical Engineering from a recognized university • Experience with testing and commissioning of sewage pumping stations or STPs • Preferred 5 years employment with international consultant
Job description: Manage and support the field operations of projects. Report to the Project Manager, but primary responsibility will be to ensure the foreman and crew have the materials, equipment, and information necessary to complete the job. And as an extension of the Project Manager, the PE is ultimately responsible for understanding and accomplishing the customer’s goals while protecting and promoting the interests of the company.
The role holder have the responsibility for leading the Civil Projects discipline to ensure that Projects in the Company are executed in an efficient and systematic manner and according to good engineering practices and to the Company s goals and objectives.The role holder is to lead a team of civil and structural engineers and designers and to act as point of reference and apply technical expertise to resolve problems escalated by the project coordinators or project engineers. He is responsible to approve internally generated engineering documents like drawings / calculations etc. He may has a prime role, whenever he is assigned the role of Task Force leader, in coordinating with multiple disciplines and customers to ensure smooth-running of a collection of projects. He compiles and provides input to the periodic reports within his area of work. He must ensure that all activities are carried out in compliance with Company s Occupational Health, Safety, Energy and Environment procedures.MINIMUM QUALIFICATIONS & EXPERIENCE REQUIRED:• Bachelor s Degree in Civil Engineering, MSc degree in Civil or Structural Engineering and PMP are preferences.• Extensive knowledge of standards, guidelines and regulations in the field of civil engineering• Has proven leadership capacity and experienceMinimum of 10 years of direct experience in the similar role preferably the Oil & Gas, Petrochemical, and Fertilizer Industry
Description : Greetings From Swan Global!!
We have an immediate opening for HVAC Engineer position!!!!
Should have 5+ Yrs of in Supervising and maintenance experience.
Salary QR 6500 a month
Must have QID .
Any nationality.
Degree /Diploma in Mechanical Engineering
Country : Qatar
Description : Description:
Hiring, Site Civil Engineer with the following qualification:
- Degree in civil engineering.
- Minimum 5 years of experience.
- Strong communication and interpersonal skills.
- Proven working experience as Site Engineer.
- Excellent knowledge of design and visualizations software such as AutoCAD, Civil 3D or similar.
- Fluent in dealing with the site supervision staff.
- Study project documents (Drawings, specifications, BOQ )
- Coordinate with the construction manager the required resources to achieve project scope according to the project baseline.
- Prepare daily inspection requests for the running activities.
- Prepare project daily report to the construction manager.
- jobs Inspect project sites to monitor progress and ensure conformance to design specifications and safety standards.
QR10-14k + flights & medical pr month
The Company
Digby Morris' client is a highly respected employer in the Qatari market. A privately owned main contractor which employs about 5000 employees entirely in Doha, the company has been operating for about 30 years and has a turnover in the region of $600m per annum. It is largely involved in traditional D&B construction projects including hotels and high rise commercial projects.
Owing to a pending retirement the company has an immediate requirement for an ELV Project Electrical Engineer to be based in their head office in Doha.
The Role
Employee shall be responsible for the complete delivery of End-to-End Projects.
The Key Roles shall be:
1.Preparation and coordination of all project documentation.
2.Coordinating the efforts of team members and third-party contractors or consultants to deliver projects according to plan.
3.Define the project’s objectives and oversee quality control throughout its life cycle.
4.Project Execution
5.Projects Finalization within time and budget
6.Responsible for Planning & Coordination of ELV works which includes Preparing & Monitoring of Construction
7.Develop the detailed schedules for all ELV activities; Design Procurement, Installation and Testing and Commissioning of the following disciplines:
8.Insure the update and forecast ELV activities
9.Insure the follow-up of the schedule
10.Report to the project Manager
11.Coordination with procurement team for timely delivery of materials at site
12.Monitoring execution and managing overall ELV works carrying out on site observation & coordination in interpreting drawing at site
13.In-house interfacing with other departments related to drawing & ability of front Preparation of sub-contractor billing, progress reports, project documentation, procurement details of materials at site
The Ideal Candidate:
• Diploma in Electronic Engineering or relevant discipline, university degree holder will be an advantage but not mandatory.
• At least 12 years relevant working experience in Security or ELV System installation for infrastructure.
• Be self-motivated and good communication skills with different levels of trades at site.
Company : Manar Al Omran
Country : Qatar
Description : Looking for a Structural Design Engineer (Formwork and Scaffolding).
Relevant Experience Compulsory
Salary depends on experience
Any Nationality Male/Female
Must QID+ Sponsorship Transfer and Qatar Licence (Light)
Send your CV
ELECTRICAL ENGINEER:
Bachelor of Electrical Engineering.
Minimum 5 years of relevant experience with at least 3 years of experience in GCC.
Experience in maintenance of high voltage units, electrical panels systems, PLC etc.
Company : Outdoor Factory
Country : Doha
Description : CIVIL SITE ENGINEER - QATAR
Outdoor Factory is a design and build company founded in 2010 to deliver dreams into reality. Since then, we have established local and international projects and been meeting hundreds of happy clients and partners.
We are seeking for a Civil Site Engineer to be employed to our company, which provides services in Theme Parks, monument museum, sculpture, industrial and special design projects, at QATAR Doha, to manufacture wooden railing, self-cooling floor, pool coating, artificial rock, themed façade.
QUALIFICATIONS
• Graduated from universities’ engineering faculties,
• Superstructure Project experience for minimum of 10 years in the field, and 5 years in technical office,
• Good knowledge of English, both written and spoken; Arabic is a plus,
• Developed himself/herself about design,
• Solid knowledge of Material detail,
• Ability to manage a project’s execution and detailed process (Previous experiences in grand hotels, parks, resorts, Malls is preferred)
• Proficient in Autocad, Revit (3ds Max is preferred)
• Strong interpersonal skills,
• Valid driver license
JOB DESCRIPTION
To manufacture wooden railing, self-cooling floor, pool coating, artificial rock, themed façade, at QATAR Doha;
-Conducting all the coordination in the field between Employer and Consultant
-Gathering and presenting all necessary papers for approval of materials
-Doing official correspondence with the head office
-Handling local supplying at head office coordination
- Finalizing the approval following applications, and conducting the dispatch and the coordination with subcontractor
-Preparing manufacturing quantity, and its attachments
-Preparing quantity reports, progress reports, and daily site reports
- Ensuring subcontractor referral and coordination, by completing the applications following approval status
-Ensuring the working principles in accordance with Occupational Health and Safety standards
The engineer will perform a broad cross section of complex technical and administrative activities requiring extensive experience and specialization in Quality Control and Quality Assurance inspection of construction work. Job Duties: • Analyzes applicable codes, standards and project contract documents and monitors construction activities to ensure compliance. • Monitors and/or evaluates electrical tests and inspections such as ground-fault, ground resistance, insulation resistance, polarity, continuity, capacity, load and other electrical field tests as required. Able to interpret single-line and/or schematic electrical drawings as well as plans and specifications. • Field checks installation and location of electrical equipment, electrical duct, conduit, cable, panels and other components of the electrical system being installed. Assures compliance with approved submittals. • Monitors all electrical installations to assure circuitry, phasing equipment and grounding adhere to construction documents and National Electric Code requirements. • Provides general inspection on all construction and subcontractor work to assure a safe and workmanlike operation. • Verifies equipment settings, alignment, testing and energization requirements. • Evaluates and monitors adequacy of Contractor Quality Control (CQC) programs. Minimum Requirements • Minimum 8 years of work experience on construction and supervision projects. • Candidate must be MMUP registered. Preferred Qualifications • Diploma / Bachelor Degree in relevant Engineering field (i.e. Civil, Mechanical, Electrical, Structural etc.)
A leading international engineering practice, offers service in architecture, interior design, master planning, landscape, urban design and building consultancy within Asia & Middle East currently require a Senior Civil Engineer to join their organisation.
Qualification:
• Minimum Bachelor’s Degree in Civil Engineering or relevant Subject
• Education qualification obtained from North America, West Europe, Australia
• Holder of Chartered Membership in relevant discipline (e.g. Engineering) would be an advantage
• MBA and/or secondary relevant degree would be advantage
• Holder of current/valid Driving License
Experience:
• 15 years of cumulative experience in a relevant field, minimum 5 years in treated/waste water including the managing the contractors and leading the team
• Experience of working in a multidisciplinary organization preferably in the Middle East
• Knowledge and experience in Contract Management. Ability to deliver and support change
• Knowledge of Quality, Health and Safety, and Environment policies, procedures and regulations.
• Competent in Microsoft Office Packages
• Ability to influence and engage stakeholders and staff at all levels within the Organization
• Ability to communicate verbally and in writing in English is mandatory.
• Ability to communicate verbally and in writing in Arabic is preferred
Ae.centiel
Country : Qatar
Description : We are looking for an experienced Sales Engineer to join our team in Qatar.
Requirements:
• Degree in Electrical Engineering
• 5 to 7 years of UAE experience in UPS systems and related products
• Candidates having valid UAE driving license preferred
Suitable candidates can send their cv
Country : Qatar
Description : Job Title : Civil Engineer
Qualification : Bachelor Degree in Civil Engineering
Experience : Minimum 15 years experience with at least 5 years in Qatar / GCC with a valid UPD A Grade
Note : Must mention Civil Engineer in Subject
Electrical Engineer, any nationality have experience 15 years in electrical construction shop drawings AutoCAD, BOQ, Pricing, design, Site work have UAE Driving
Edgewater Technical Services WLL
Category : Engineering
Description : • Operate all valves as and when required. • Write defect notification to supervisor for all defects in transmission and distribution mains. • Isolate the valves during any incidents of pipe break or shut down of main line for any interconnection or maintenance work. • Resume water supply after repair work • Checks the area pressure/monitoring after the repair work • Daily valve operations for areas which are supplied less than 24 hrs. Water supply. • Dewater of all valve pits including reservoir chambers. • Routine air releasing from fire hydrant for all distribution mains. • Submit to supervisors daily and monthly reports. • Supervise the valve helpers • Other jobs assigned by the supervisor
A Leading (A) Grade local engineering consultancy firm based in Doha is seeking to hire a Site Electrical Engineer with minimum of 10 years of practical experience preferably in consultancy firm with MMUP certificate.
Requirements
- Bachelor Degree in Electrical Engineering.
- Experience From (10-15) years / and in Gulf 3 years at least.
- Must have MMUP certificate
- Have Experience In Consultants Engineering Companies.
- Available to join immediately is preferred
About the Company
Dara Engineering Consultants was founded in 2000 and it has become one of the leading consultancy firms in Qatar with Great A classification under the Professional Consultants Committee.
Dara is having highly specialized teams in Architectural, Interior Design, Landscape Architectural, Urban Planning, Quantity Survey, Cost Control, Structural, Electrical, Mechanical and Construction management of various kinds of projects.
ountry : Qatar
Description : Tender Specialist
Job Description
We are looking for a professional who has experienced in Tendering/Bidding, who will help identify, manage and win large contracts from both of the government and private healthcare industry in Qatar. He/She will be responsible for introducing and coordinating the bid response process, developing and maintaining a knowledge base of ‘standard’ answers and templates, as well as identifying ways to improve the quality, consistency and efficiency of the bid response process.
Qualifications and Experience:
· Proven success as a Bids & Tenders Manager in a similar sector (Medical Device, Consumables, etc.)
· Minimum of 2 years’ experience developing proposals to secure grants and contracts.
· Working knowledge of the bid submission and tender associated terminologies.
· Degree level qualification in medical field, or equivalent work experience.
· Applied knowledge of project cycle management including problem analysis, project design, financial planning and management, and monitoring and evaluation.
· Experience preparing quality narrative and financial proposals
· Experience coordinating bid teams to deliver proposals, bids, or manage contracts.
· Able to manage several concurrent project duties and competing demand without losing focus
· Perform calmly and effectively under pressure and deliver to tight time frames
Skills
· Excellent communication and project management skills to manage clients and partners and gather deliverables from a range of internal and external stakeholders within pressurised schedules.
· Excellent organisational skills.
· Very strong writing skills to be able to construct high quality, complex narratives and convey complex ideas simply and clearly.
· Strong numeracy skills and moderate-advanced level of competence using Excel spreadsheets and formulas for financial information including price modelling and budget preparation.
· Confident and proficient in IT skills including Microsoft Office and Google Suite products.
Company : PENINSULAR PETROTECH ENGINEERING
Country : Qatar
Description : Mechanical Qc engineer with 7 years of experience in EPC oil and gas, petrochemical
• Execute mechanical, electrical & plumbing activities according to drawings and taking approvals from consultant and client time to time.
• In-charge of material submittals and take off for materials in the site.
• Oversee and monitor the installation and handling of HVAC System, Fire Fighting System, Plumbing & Drainage System.
• Develop inspection procedures and implement throughout the construction stages. Ensure Implementation of Quality standards and Control.
• Coordinate with electrical and civil contractors for better work results at worksite
• Carried out inspections related to material and mechanical activities completed on site.MEP Emgieen
- Should have at least 5 years of experience in big infrastructure project across the middle east region
- Should have diploma/degree in Mechanical or Electrical Engineering
- Fluent in English Language
- Should be able to relocate in Qatar immediately
Elevator/Escalator Inspection Engineer
Education : B.E/B.Tech Mechanical/ Electrical Engineering
Experience : 1-3 years’ Experience in the field of Elevator, Escalator and Moving Walk ways.
The engineer should have relevant knowledge and accreditation experience in DAC/ENAS.
Driving license is an added advantage.
Job Descriptions :
Serves as a full time representative of the contractor to the client and its representatives.
Responsible for the project management plan.
Guides, orient, organize and monitor the various professional people working on the project.
Communicates and specifies clearly the tasks and the contributions of each project member.
Conducts follow up meeting on a regular basis and ensures everybody is on track.
Ensures that all corresponding reports such as monthly, weekly, and other different type of reports as per
requirements are being submitted in a timely and efficient manner.
Main responsible for the procurement management plan.
Main responsible to manage all subcontractors and suppliers.
Responsible for the development and of the implementation of the master plan or baseline in coordination
Digby morris---
The business is involved in EPC construction of Piping and associated interconnecting piping works, EPC construction of Storage tanks (API 650,620 & AWWA), Engineering, Manufacturing & Supply of Major Pressure Vessels, Columns, Boilers and Process Equipment in strict conformance with stringent International Codes & Standards. The company offers the following services: EPC Projects (Engineering, Procurement Construction). Construction (Civil, Mechanical, Electrical & Instrumentation). Pre-Commissioning, Commissioning and Start up Services. Maintenance (Asset Management, Shutdowns & Technical support) Medium and Heavy Steel Fabrication Owing to a recent project award our client is looking for a seasoned Project Manager to steer the successful delivery of a major new infrastructure project in Qatar
Provide support and co-ordinate with Senior Architect on all Architectural works related construction/design drawing related issues during the course of projects as and when required. Maintain an overview of entire project progress, quality control and safety review on general construction practices accepted by standard code of practices, while continuing to attend to all technicalities review related to the project.
Key Accountabilities / Responsibilities:
• Performs engineering design tasks for master planning and roadway projects from preliminary stage to final design.
• Develops plans, specifications, cost estimates, reports and prepares final bid packages.
• Establishes working relationships and networks with client technical staff and project managers.
• Provides engineering design services on traditional design-bid-build projects and design-build highway projects.
• Manages and mentors’ junior engineers on project assignments
• Organizes meetings between design staff, subcontractors and client managers to coordinate design activities.
• Coordinates the planning, staffing, scheduling, budget management and quality control of subcontractors and internal technical & support staff.
• Highly participates in project decisions regarding technical approaches, cost and scheduling performance.
• Projects Quality Assurance and Quality Controls.
• Assists project managers with other various tasks when required.
• Displays significant proficiency in the design of local roads, highways as per QHDM and other acceptable international standards.
Quality Engineer/ Controller.
Education : Any Degree
Experience : 1-4 years’ Experience as a Quality controller in the field of Inspection Bodies.
The candidate should have relevant knowledge in ISO 1720, ISO 17024 and Integrated management system related with the accreditation experience in DAC/ENAS.
DUTIES AND RESPONSIBILITIES: - Assume all responsibilities related to project hydraulic works such as design, analysis, etc. - Assist in design and provide recommendations hydraulic parameters of deep tunnel (Micro Tunnel, TBM etc.), pipes, conduits, design calculations and assessments etc. - Assist in external and internal coordination pertinent to hydraulic works and design. - Review, comment, recommend acceptance or otherwise on contractors’ and consultants’ submissions. - Liaise with utilities providers and stakeholders.
Purpose
• To supervise processes to produce contractual documentation
• To supervise and ensure that the production of contractual documents is done according to company procedure and ethics
• To produce contractual documents according to company procedure and ethics
• To provide a quality, cost-effective and time efficient contracts service to technical entities
• To participate in the optimization of the economic performance of the operations conducted
The Job holder executes the following contracts activities
• Prepare and maintain an up-to-date list of qualified contractors/suppliers/potential tenders/contracts with updated information in order to perform market studies
• Take a leading role in the validation of the contracts strategy through:
• Arranging and attending Contracts Committee Meetings
• Pre-qualifying bidders
• Defining target prices
• Defining criteria for evaluation
• Supervise the creation of CFT commercial documents
• Supervise the preparation and issue of the call for tender to contractors and suppliers on the bidders list
• Ensure the preparation and send out the dossiers of pre-consultation and Standard or Complex invitations to bid
• Verify the alignment with HSE clauses, Company rules, Procedures, Instructions and applicable legislation when issuing all technical contracts and when drafting contractual and commercial terms and conditions
• Verify the Terms & Conditions (standard, general and financial)
• Supervise the establishment of the technical contracts and contractual agreements, directly participate to the most complex contracts
• Participate in terms & conditions and commercial bid complex analysis and negotiations to ensure that a clear definition of responsibilities is developed
• Assume a leading role in RTAs through managing in Contract committees and award validation and RTA evaluations
• Handle the approval from authorities and partners, clarification of rights and obligation of signing parties and the signature process of formal documents
• Intervene in the settlement of claims and lawsuits, in relation with the Juridical, Insurance, Finance and company management by proposing strategies and actions and participating to the negotiations
• Ensure monitoring of on-going contracts status, participate in contract renewal and amendments discussions
• Review supplier performance
Requirements
• BSc Degree in Science or Commercial field or its equivalent
• International Experience Required
• Professional experience: 8 - 10 years’ post-graduate experience required. Minimum 8 years in the O&G industry. Minimum 6 years in contracts domain and minimum of 2 years as Senior Contract Engineer in the Company.
• Personal Abilities: Advanced Management, Advanced Human Relations, Problem Solving and Planning / organizing / coordinating / controlling
Country : Qatar
Description : Mechanical Engineer
Consultancy Company looking to hire a Mechanical Engineer.
Requirements/Qualifications:
• UPDA certified Grade A or B with 10 years’ Experience or more is a must.
• Familiar of FF, ventilation and HVAC. Plumbing.
• Designing.
• Site supervision & execution.
• Preferable experience in Consultancy.
• Salary Between Qar. 8,000 To Qar. 12,000
• Send your UPDA License along with your resume
Provide support and co-ordinate with all concerned parties and ensure that the works are executed as per contract documents. Maintain an overview of entire project progress, quality control, and safety review on general construction practices accepted by standard code of practices, while continuing to attend to all technicalities review related to project.
Key Accountabilities / Responsibilities:
• Review the tender & IFC drawings and discrepancies to be reported to PM/RE of the project within a maximum 3 weeks of project commencement. Any constructability issues to be identified and reported. Any Request for Information related to specification, drawings, etc to be raised with the proposed solutions for confirmation from PM/RE/concern party.
• Attend the factory visits, witness third party tests as directed by PM.
• Review and comment on the Contractor material submission, shop drawings , record drawings, As built drawings, method statements, ITPs, 0&M manual, as per contract documents. Release the documents within 7 days.
• Review and provide comments on the baseline & other programme of works including schedule of submission of the project.
• Attend inspection request in the same day (whenever possible) and release the comments on the same day.
• Assist QS in monthly payment certification. Release the executed work percentages within 2 days of receipt of contractor submission.
• Assist PM and QS in drafting related Site Work Instruction. Support the team to advise on the impacts.
• Coordinate with other trade disciplines for smooth project progress.
• Assist PM in coordinating with the design team as and when required especially for confirming RFI responses.
• Safety Audit/inspection to be executed when AEB HSE personnel not available in the project.
• Train, guide direct and advise subordinate Civil Engineers to ensure that services delivered are according to the project requirements.
• Weekly or monthly brief work reports to be provided to PM as required.
• Assist in preparing Client project reports.
• Support the organization as required utilising the self multi skill knowledge/awareness.
• Provide lessons learnt during the project closure.
• Inspect and prepare snag list and do continuous follow up with the concerned to close the issued snag.
• Routine inspections to be carried out to ensure that the Contractor is executing the project as per the contract requirement. Issue ‘CAR’ or ‘NCR’ in consultation with RE/PM as and when non-compliance is noted.
Job description: Required Design /Project coordinator for an International Engineering consultant for their main office.
Applicant should be Civil Engineering Graduate with 12+ years of experience in design coordination and project coordination with a reputed engineering consultant in to airport projects and experience in airfield, air side construction are desirable.
Carrier is a global provider of sustainable building and refrigeration solutions. Ever since the establishment of Carrier Solutions as a joint venture between Ensrv and Carrier Corporation in 1999, we have always kept our customers at the center of every product & service we offer and act swiftly to exceed their expectations. Our efforts to provide industry-leading solutions to improve home comfort, productivity and efficiency have never looked better as we continue to build best-in-class products and services to our innovative controls and building automation systems. OVERALL JOB PURPOSE: To achieve the booking and sales target for Service and Aftermarket Business Unit products (Service Agreements (Maintenance contracts), Service Repairs and Service modernization (retrofit/replacement)) with specified gross margin contribution and receivable days, in line with the company’s Environment, Health & Safety and quality standards. KEY ACCOUNTABILITIES: Order Intake: Work towards achieving the assigned order intake target in the respective categories of Service Agreements, Service Repairs and Service Modernisation, while complying with company Finance, Ethics and Sales Policies. Sales: Work towards achieving the assigned sales target in the respective categories of Service Agreements, Service Repairs and Service Modernisation, with aggressive internal and external customer follow-up. Gross Margin: Work towards achieving the assigned Gross Margin target in the respective categories of Service Agreements, Service Repairs and Service Modernisation by extensive customer negotiation and winning projects at the right price. Receivables: Be personally responsible for the pending receivables from customer and ensure that all outstanding balances are cleared in timely manner. Qualifications: • Bachelor’s degree in mechanical engineering or equivalent. • 3-5 years of experience in HVAC service sales. • Knowledge of HVAC industry in Qatar • Qatar Driving license • Good command of written and spoken English, Arabic is a plus. What do we offer? • Benefit from our great workplace environment and culture • Participate in incentive plans • Get development and learning opportunities • Get competitive salary and benefits, suitable to your seniority level Carrier is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class.
Key accountabilities for this position include but are not limited to: • Technical Delivery: • Review reports and records. • Manage non-conforming works, generating reports and corrective actions and coordinating responses. • Performs other responsibilities associated with this position as may be appropriate. • Assist with the preparation of cost estimates for project design and construction. • Collaboration and working as part of a team • Work in conjunction with engineers to solve project design problems, performing basic design calculations as required. • Work under the direction of the Technical Lead; • Conduct field inspections under the supervision of the Technical Lead, and Client Engineer representative. • Liaison with teams working remotely from other parts of theworld to facilitate completion of tasks, and project. • Good communicator. • Client Service Management • Internal and external client liaison • Ability to build and maintain lasting and positive relationships • Experience in utility diversions and management • Follow safe work practices and adhere to company guidelines and policies for planning and executing work in a safe manner. • Complete all work in line with Stantec Core Values and in accordance with the Stantec Quality Systems and Project Quality Procedures. • Design for safety, i.e. Construction Design Management. • Other duties as requested from time to time by the Lead/ Supervisor Civil Engineer. Title: Site Mechanical Engineer (Pumping Stations) Qualifications: • 10 years experience with infrastructure, especially STPs and Pumping stations • 15 years of total experience • Degree in Mechanical Engineering from a recognized university • Experience with testing and commissioning of sewage pumping stations or STPs • Preferred 5 years employment with international consultant
Job description: Manage and support the field operations of projects. Report to the Project Manager, but primary responsibility will be to ensure the foreman and crew have the materials, equipment, and information necessary to complete the job. And as an extension of the Project Manager, the PE is ultimately responsible for understanding and accomplishing the customer’s goals while protecting and promoting the interests of the company.
The role holder have the responsibility for leading the Civil Projects discipline to ensure that Projects in the Company are executed in an efficient and systematic manner and according to good engineering practices and to the Company s goals and objectives.The role holder is to lead a team of civil and structural engineers and designers and to act as point of reference and apply technical expertise to resolve problems escalated by the project coordinators or project engineers. He is responsible to approve internally generated engineering documents like drawings / calculations etc. He may has a prime role, whenever he is assigned the role of Task Force leader, in coordinating with multiple disciplines and customers to ensure smooth-running of a collection of projects. He compiles and provides input to the periodic reports within his area of work. He must ensure that all activities are carried out in compliance with Company s Occupational Health, Safety, Energy and Environment procedures.MINIMUM QUALIFICATIONS & EXPERIENCE REQUIRED:• Bachelor s Degree in Civil Engineering, MSc degree in Civil or Structural Engineering and PMP are preferences.• Extensive knowledge of standards, guidelines and regulations in the field of civil engineering• Has proven leadership capacity and experienceMinimum of 10 years of direct experience in the similar role preferably the Oil & Gas, Petrochemical, and Fertilizer Industry
Description : Greetings From Swan Global!!
We have an immediate opening for HVAC Engineer position!!!!
Should have 5+ Yrs of in Supervising and maintenance experience.
Salary QR 6500 a month
Must have QID .
Any nationality.
Degree /Diploma in Mechanical Engineering
Country : Qatar
Description : Description:
Hiring, Site Civil Engineer with the following qualification:
- Degree in civil engineering.
- Minimum 5 years of experience.
- Strong communication and interpersonal skills.
- Proven working experience as Site Engineer.
- Excellent knowledge of design and visualizations software such as AutoCAD, Civil 3D or similar.
- Fluent in dealing with the site supervision staff.
- Study project documents (Drawings, specifications, BOQ )
- Coordinate with the construction manager the required resources to achieve project scope according to the project baseline.
- Prepare daily inspection requests for the running activities.
- Prepare project daily report to the construction manager.
- jobs Inspect project sites to monitor progress and ensure conformance to design specifications and safety standards.
QR10-14k + flights & medical pr month
The Company
Digby Morris' client is a highly respected employer in the Qatari market. A privately owned main contractor which employs about 5000 employees entirely in Doha, the company has been operating for about 30 years and has a turnover in the region of $600m per annum. It is largely involved in traditional D&B construction projects including hotels and high rise commercial projects.
Owing to a pending retirement the company has an immediate requirement for an ELV Project Electrical Engineer to be based in their head office in Doha.
The Role
Employee shall be responsible for the complete delivery of End-to-End Projects.
The Key Roles shall be:
1.Preparation and coordination of all project documentation.
2.Coordinating the efforts of team members and third-party contractors or consultants to deliver projects according to plan.
3.Define the project’s objectives and oversee quality control throughout its life cycle.
4.Project Execution
5.Projects Finalization within time and budget
6.Responsible for Planning & Coordination of ELV works which includes Preparing & Monitoring of Construction
7.Develop the detailed schedules for all ELV activities; Design Procurement, Installation and Testing and Commissioning of the following disciplines:
8.Insure the update and forecast ELV activities
9.Insure the follow-up of the schedule
10.Report to the project Manager
11.Coordination with procurement team for timely delivery of materials at site
12.Monitoring execution and managing overall ELV works carrying out on site observation & coordination in interpreting drawing at site
13.In-house interfacing with other departments related to drawing & ability of front Preparation of sub-contractor billing, progress reports, project documentation, procurement details of materials at site
The Ideal Candidate:
• Diploma in Electronic Engineering or relevant discipline, university degree holder will be an advantage but not mandatory.
• At least 12 years relevant working experience in Security or ELV System installation for infrastructure.
• Be self-motivated and good communication skills with different levels of trades at site.
Company : Manar Al Omran
Country : Qatar
Description : Looking for a Structural Design Engineer (Formwork and Scaffolding).
Relevant Experience Compulsory
Salary depends on experience
Any Nationality Male/Female
Must QID+ Sponsorship Transfer and Qatar Licence (Light)
Send your CV
ELECTRICAL ENGINEER:
Bachelor of Electrical Engineering.
Minimum 5 years of relevant experience with at least 3 years of experience in GCC.
Experience in maintenance of high voltage units, electrical panels systems, PLC etc.
Company : Outdoor Factory
Country : Doha
Description : CIVIL SITE ENGINEER - QATAR
Outdoor Factory is a design and build company founded in 2010 to deliver dreams into reality. Since then, we have established local and international projects and been meeting hundreds of happy clients and partners.
We are seeking for a Civil Site Engineer to be employed to our company, which provides services in Theme Parks, monument museum, sculpture, industrial and special design projects, at QATAR Doha, to manufacture wooden railing, self-cooling floor, pool coating, artificial rock, themed façade.
QUALIFICATIONS
• Graduated from universities’ engineering faculties,
• Superstructure Project experience for minimum of 10 years in the field, and 5 years in technical office,
• Good knowledge of English, both written and spoken; Arabic is a plus,
• Developed himself/herself about design,
• Solid knowledge of Material detail,
• Ability to manage a project’s execution and detailed process (Previous experiences in grand hotels, parks, resorts, Malls is preferred)
• Proficient in Autocad, Revit (3ds Max is preferred)
• Strong interpersonal skills,
• Valid driver license
JOB DESCRIPTION
To manufacture wooden railing, self-cooling floor, pool coating, artificial rock, themed façade, at QATAR Doha;
-Conducting all the coordination in the field between Employer and Consultant
-Gathering and presenting all necessary papers for approval of materials
-Doing official correspondence with the head office
-Handling local supplying at head office coordination
- Finalizing the approval following applications, and conducting the dispatch and the coordination with subcontractor
-Preparing manufacturing quantity, and its attachments
-Preparing quantity reports, progress reports, and daily site reports
- Ensuring subcontractor referral and coordination, by completing the applications following approval status
-Ensuring the working principles in accordance with Occupational Health and Safety standards
The engineer will perform a broad cross section of complex technical and administrative activities requiring extensive experience and specialization in Quality Control and Quality Assurance inspection of construction work. Job Duties: • Analyzes applicable codes, standards and project contract documents and monitors construction activities to ensure compliance. • Monitors and/or evaluates electrical tests and inspections such as ground-fault, ground resistance, insulation resistance, polarity, continuity, capacity, load and other electrical field tests as required. Able to interpret single-line and/or schematic electrical drawings as well as plans and specifications. • Field checks installation and location of electrical equipment, electrical duct, conduit, cable, panels and other components of the electrical system being installed. Assures compliance with approved submittals. • Monitors all electrical installations to assure circuitry, phasing equipment and grounding adhere to construction documents and National Electric Code requirements. • Provides general inspection on all construction and subcontractor work to assure a safe and workmanlike operation. • Verifies equipment settings, alignment, testing and energization requirements. • Evaluates and monitors adequacy of Contractor Quality Control (CQC) programs. Minimum Requirements • Minimum 8 years of work experience on construction and supervision projects. • Candidate must be MMUP registered. Preferred Qualifications • Diploma / Bachelor Degree in relevant Engineering field (i.e. Civil, Mechanical, Electrical, Structural etc.)
A leading international engineering practice, offers service in architecture, interior design, master planning, landscape, urban design and building consultancy within Asia & Middle East currently require a Senior Civil Engineer to join their organisation.
Qualification:
• Minimum Bachelor’s Degree in Civil Engineering or relevant Subject
• Education qualification obtained from North America, West Europe, Australia
• Holder of Chartered Membership in relevant discipline (e.g. Engineering) would be an advantage
• MBA and/or secondary relevant degree would be advantage
• Holder of current/valid Driving License
Experience:
• 15 years of cumulative experience in a relevant field, minimum 5 years in treated/waste water including the managing the contractors and leading the team
• Experience of working in a multidisciplinary organization preferably in the Middle East
• Knowledge and experience in Contract Management. Ability to deliver and support change
• Knowledge of Quality, Health and Safety, and Environment policies, procedures and regulations.
• Competent in Microsoft Office Packages
• Ability to influence and engage stakeholders and staff at all levels within the Organization
• Ability to communicate verbally and in writing in English is mandatory.
• Ability to communicate verbally and in writing in Arabic is preferred
Ae.centiel
Country : Qatar
Description : We are looking for an experienced Sales Engineer to join our team in Qatar.
Requirements:
• Degree in Electrical Engineering
• 5 to 7 years of UAE experience in UPS systems and related products
• Candidates having valid UAE driving license preferred
Suitable candidates can send their cv
Country : Qatar
Description : Job Title : Civil Engineer
Qualification : Bachelor Degree in Civil Engineering
Experience : Minimum 15 years experience with at least 5 years in Qatar / GCC with a valid UPD A Grade
Note : Must mention Civil Engineer in Subject
Electrical Engineer, any nationality have experience 15 years in electrical construction shop drawings AutoCAD, BOQ, Pricing, design, Site work have UAE Driving
Edgewater Technical Services WLL
Category : Engineering
Description : • Operate all valves as and when required. • Write defect notification to supervisor for all defects in transmission and distribution mains. • Isolate the valves during any incidents of pipe break or shut down of main line for any interconnection or maintenance work. • Resume water supply after repair work • Checks the area pressure/monitoring after the repair work • Daily valve operations for areas which are supplied less than 24 hrs. Water supply. • Dewater of all valve pits including reservoir chambers. • Routine air releasing from fire hydrant for all distribution mains. • Submit to supervisors daily and monthly reports. • Supervise the valve helpers • Other jobs assigned by the supervisor
A Leading (A) Grade local engineering consultancy firm based in Doha is seeking to hire a Site Electrical Engineer with minimum of 10 years of practical experience preferably in consultancy firm with MMUP certificate.
Requirements
- Bachelor Degree in Electrical Engineering.
- Experience From (10-15) years / and in Gulf 3 years at least.
- Must have MMUP certificate
- Have Experience In Consultants Engineering Companies.
- Available to join immediately is preferred
About the Company
Dara Engineering Consultants was founded in 2000 and it has become one of the leading consultancy firms in Qatar with Great A classification under the Professional Consultants Committee.
Dara is having highly specialized teams in Architectural, Interior Design, Landscape Architectural, Urban Planning, Quantity Survey, Cost Control, Structural, Electrical, Mechanical and Construction management of various kinds of projects.
ountry : Qatar
Description : Tender Specialist
Job Description
We are looking for a professional who has experienced in Tendering/Bidding, who will help identify, manage and win large contracts from both of the government and private healthcare industry in Qatar. He/She will be responsible for introducing and coordinating the bid response process, developing and maintaining a knowledge base of ‘standard’ answers and templates, as well as identifying ways to improve the quality, consistency and efficiency of the bid response process.
Qualifications and Experience:
· Proven success as a Bids & Tenders Manager in a similar sector (Medical Device, Consumables, etc.)
· Minimum of 2 years’ experience developing proposals to secure grants and contracts.
· Working knowledge of the bid submission and tender associated terminologies.
· Degree level qualification in medical field, or equivalent work experience.
· Applied knowledge of project cycle management including problem analysis, project design, financial planning and management, and monitoring and evaluation.
· Experience preparing quality narrative and financial proposals
· Experience coordinating bid teams to deliver proposals, bids, or manage contracts.
· Able to manage several concurrent project duties and competing demand without losing focus
· Perform calmly and effectively under pressure and deliver to tight time frames
Skills
· Excellent communication and project management skills to manage clients and partners and gather deliverables from a range of internal and external stakeholders within pressurised schedules.
· Excellent organisational skills.
· Very strong writing skills to be able to construct high quality, complex narratives and convey complex ideas simply and clearly.
· Strong numeracy skills and moderate-advanced level of competence using Excel spreadsheets and formulas for financial information including price modelling and budget preparation.
· Confident and proficient in IT skills including Microsoft Office and Google Suite products.
Company : PENINSULAR PETROTECH ENGINEERING
Country : Qatar
Description : Mechanical Qc engineer with 7 years of experience in EPC oil and gas, petrochemical
• Execute mechanical, electrical & plumbing activities according to drawings and taking approvals from consultant and client time to time.
• In-charge of material submittals and take off for materials in the site.
• Oversee and monitor the installation and handling of HVAC System, Fire Fighting System, Plumbing & Drainage System.
• Develop inspection procedures and implement throughout the construction stages. Ensure Implementation of Quality standards and Control.
• Coordinate with electrical and civil contractors for better work results at worksite
• Carried out inspections related to material and mechanical activities completed on site.MEP Emgieen
- Should have at least 5 years of experience in big infrastructure project across the middle east region
- Should have diploma/degree in Mechanical or Electrical Engineering
- Fluent in English Language
- Should be able to relocate in Qatar immediately
Elevator/Escalator Inspection Engineer
Education : B.E/B.Tech Mechanical/ Electrical Engineering
Experience : 1-3 years’ Experience in the field of Elevator, Escalator and Moving Walk ways.
The engineer should have relevant knowledge and accreditation experience in DAC/ENAS.
Driving license is an added advantage.
Job Descriptions :
Serves as a full time representative of the contractor to the client and its representatives.
Responsible for the project management plan.
Guides, orient, organize and monitor the various professional people working on the project.
Communicates and specifies clearly the tasks and the contributions of each project member.
Conducts follow up meeting on a regular basis and ensures everybody is on track.
Ensures that all corresponding reports such as monthly, weekly, and other different type of reports as per
requirements are being submitted in a timely and efficient manner.
Main responsible for the procurement management plan.
Main responsible to manage all subcontractors and suppliers.
Responsible for the development and of the implementation of the master plan or baseline in coordination
Digby morris---
The business is involved in EPC construction of Piping and associated interconnecting piping works, EPC construction of Storage tanks (API 650,620 & AWWA), Engineering, Manufacturing & Supply of Major Pressure Vessels, Columns, Boilers and Process Equipment in strict conformance with stringent International Codes & Standards. The company offers the following services: EPC Projects (Engineering, Procurement Construction). Construction (Civil, Mechanical, Electrical & Instrumentation). Pre-Commissioning, Commissioning and Start up Services. Maintenance (Asset Management, Shutdowns & Technical support) Medium and Heavy Steel Fabrication Owing to a recent project award our client is looking for a seasoned Project Manager to steer the successful delivery of a major new infrastructure project in Qatar
Provide support and co-ordinate with Senior Architect on all Architectural works related construction/design drawing related issues during the course of projects as and when required. Maintain an overview of entire project progress, quality control and safety review on general construction practices accepted by standard code of practices, while continuing to attend to all technicalities review related to the project.
Key Accountabilities / Responsibilities:
• Performs engineering design tasks for master planning and roadway projects from preliminary stage to final design.
• Develops plans, specifications, cost estimates, reports and prepares final bid packages.
• Establishes working relationships and networks with client technical staff and project managers.
• Provides engineering design services on traditional design-bid-build projects and design-build highway projects.
• Manages and mentors’ junior engineers on project assignments
• Organizes meetings between design staff, subcontractors and client managers to coordinate design activities.
• Coordinates the planning, staffing, scheduling, budget management and quality control of subcontractors and internal technical & support staff.
• Highly participates in project decisions regarding technical approaches, cost and scheduling performance.
• Projects Quality Assurance and Quality Controls.
• Assists project managers with other various tasks when required.
• Displays significant proficiency in the design of local roads, highways as per QHDM and other acceptable international standards.
Quality Engineer/ Controller.
Education : Any Degree
Experience : 1-4 years’ Experience as a Quality controller in the field of Inspection Bodies.
The candidate should have relevant knowledge in ISO 1720, ISO 17024 and Integrated management system related with the accreditation experience in DAC/ENAS.