DUTIES AND RESPONSIBILITIES: - Assume all responsibilities related to project hydraulic works such as design, analysis, etc. - Assist in design and provide recommendations hydraulic parameters of deep tunnel (Micro Tunnel, TBM etc.), pipes, conduits, design calculations and assessments etc. - Assist in external and internal coordination pertinent to hydraulic works and design. - Review, comment, recommend acceptance or otherwise on contractors’ and consultants’ submissions. - Liaise with utilities providers and stakeholders.
Provide support and co-ordinate with Senior Architect on all Architectural works related construction/design drawing related issues during the course of projects as and when required. Maintain an overview of entire project progress, quality control and safety review on general construction practices accepted by standard code of practices, while continuing to attend to all technicalities review related to the project.
Key Accountabilities / Responsibilities:
• Performs engineering design tasks for master planning and roadway projects from preliminary stage to final design.
• Develops plans, specifications, cost estimates, reports and prepares final bid packages.
• Establishes working relationships and networks with client technical staff and project managers.
• Provides engineering design services on traditional design-bid-build projects and design-build highway projects.
• Manages and mentors’ junior engineers on project assignments
• Organizes meetings between design staff, subcontractors and client managers to coordinate design activities.
• Coordinates the planning, staffing, scheduling, budget management and quality control of subcontractors and internal technical & support staff.
• Highly participates in project decisions regarding technical approaches, cost and scheduling performance.
• Projects Quality Assurance and Quality Controls.
• Assists project managers with other various tasks when required.
• Displays significant proficiency in the design of local roads, highways as per QHDM and other acceptable international standards.
Prepare, schedule, coordinate, and monitor all assigned projects.
• Responsible for security, health and safety. The main source of technical advice and quality control for everyone working on site.
• Organizing and supervising materials and people. Agree the price and oversee the choice for materials to be used on the project.
• Mark out the site, make sure designs are applied correctly and liaise with main and sub-contractors and the site manager.
• Regular liaison with the client, its representatives, and any consultants.
• Levelling and surveying a site, checking drawings and quantities and ensuring the accuracy of calculations.
• Compile estimates for technical and material requirements for project development.
• Suggest process and technical design changes to improve performance and efficiency.
• Prepare proposal documents and presentations. Maintain detailed documentation of all site engineering activities.
• Compile and present reports explaining project details.
• Liaise with the local authority (where appropriate to the project) to ensure compliance with local construction regulations and by-laws.
• Monitor project progress, compliance with design specifications and safety standards.
• Direct engineering activities; assign tasks, provide training and support.
• Create work schedules and adjust as needed to meet project deadlines.
• Maintain quality control in every area (budget, scheduling, planning, personnel performance, team dynamics).
• Communicate effectively with project manager and other project participants in order to provide needed assistance and technical support.
• Reviewing engineering deliverables; initiate appropriate corrective actions throughout the project life-cycle.
• Plan the work to be done and organize things so that deadlines are met.
Requirements
• Prepare, schedule, coordinate, and monitor all assigned projects.
• Responsible for security, health and safety. The main source of technical advice and quality control for everyone working on site.
• Organizing and supervising materials and people. Agree the price and oversee the choice for materials to be used on the project.
• Mark out the site, make sure designs are applied correctly and liaise with main and sub-contractors and the site manager.
• Regular liaison with the client, its representatives, and any consultants.
• Leveling and surveying a site, checking drawings and quantities and ensuring the accuracy of calculations.
• Compile estimates for technical and material requirements for project development.
• Suggest process and technical design changes to improve performance and efficiency.
• Prepare proposal documents and presentations. Maintain detailed documentation of all site engineering activities.
Job Descriptions :
Serves as a full time representative of the contractor to the client and its representatives.
Responsible for the project management plan.
Guides, orient, organize and monitor the various professional people working on the project.
Communicates and specifies clearly the tasks and the contributions of each project member.
Conducts follow up meeting on a regular basis and ensures everybody is on track.
Ensures that all corresponding reports such as monthly, weekly, and other different type of reports as per
requirements are being submitted in a timely and efficient manner.
Main responsible for the procurement management plan.
Main responsible to manage all subcontractors and suppliers.
Responsible for the development and of the implementation of the master plan or baseline in coordination
Blue Wings----
Description : 3 - 5 years experienced Environmental Engineer required.
Environmental qualification is mandatory. Other certifications will be an added advantage.
Middle East/Qatar experience is 1st preference.
Need to be on your own (Freelancer) Qatar visa. Should be with valid QID.
Willing to work on Manpower Supply.
Working hours 10 hours per day, 6 days a week.
Duration, 1 month and extendable.
With an expected salary?
Garden House Center
Category : Engineering
Description : A reputed Landscaping Company in Qatar is urgently looking to hire for the following positions: 1. IRRIGATION ENGINEER: Bachelor of Irrigation Engineering. 5 years of relevant experience with minimum 3 years in GCC. Experience in Construction and Maintenance of Landscaping projects. 2. IRRIGATION FOREMAN: Diploma/Certificate in Irrigation. Minimum 5 years of relevant experience with 3 years in GCC. Experience in Construction and Maintenance of Landscaping projects. Note: All the above requirements are urgent. Only for candidates who are locally available in Qatar with Transferable Visa. Interested people can share their profile
Review and provide feedback to design reviews apart from analyzing and interpreting the impact on the performance and utilization of asset base.
• Undertake minor design works and liaise various stakeholders for follow-up and approval.
• Contribute to annual investment plan and work as team with Operations Engineers and Section Heads to assist in developing, accessing and prioritizing the DNO&M asset investment needs.
• Provide asset performance and trend analysis. Track performance against the DNO&M plan, identifying areas of non-compliance with proposed high level solutions
• Carrying out risk review and associated processes.
• Deliver accurate robust plans for long term (greater than five years) Operations and Maintenance requirements
• Creating job order using EAMS (Enterprise asset management system).
• Prepare the annual Asset Management Plan
• Liaise with Engineers and Contractors to carry out necessary activities to ensure effective operation, maintenance of DNO&M Assets
• Undertake the project delivery by preparing the scope document and BOQ for the purposes of tendering.
• Review tender submissions and provide recommendations on technical aspects
• Adhere to Health and Safety Policy and Procedures in the workplace and comply with any new work instructions
Requirements
• Bachelor degree in engineering/relevant subject
• Chartered Member of a relevant professional body (e.g. IAM, CIWEM, ICE or equivalent)
• Current/valid Qatar Driving Licence would be an advantage
Ashghal
Assists the Project Manager and Construction Manager to ensure that the construction elements of public building construction projects are being completed according to time, budget and Ashghal accepted quality standards.
• Assists the Construction Manager to monitor the work completed by the PMC partner company on the development of construction contract package. This could include architectural, civil, electrical and mechanical aspects of technical design, drawings and specifications, engineering estimates and project budgets and job scheduling
• Analyses survey reports, maps, drawings, blueprints, topographical and geologic data to provide inputs to Construction Manager for inclusion in tender documents for PMC contracts.
• Visit PMC partner companies and/or third party contractors to monitor and identify any issues relating to construction project timeliness, quality and consistency of work and adherence to contract terms.
• Works closely with PMC partner companies and/or third party sub contractors to interpret and explain plans and contract pertaining to the civil and structural dimensions of the project.
• As directed by the Construction Manager and/or Project Manager inspect construction sites on a periodical basis to ensure conformance to design specifications and adherence to quality.
• Resolves within level of authority or raise concerns regarding modifications or structural changes to Construction Manager.
• Interprets, explains and enforces regulations, ordinances and policies to PMC partner companies and /or third party sub contractors and confer with Construction Manager regarding possible changes to plans and problem resolution.
• Ensures that PMC partner companies produce regular reports on damages, accidents, delays, bad weather, or emergencies at construction sites.
• Liaise with PMC partner companies to ensure validity/accuracy of report and that any resulting corrective action has been implemented. Liaise on a regular basis with the Construction Manager to inform of progress and agree on any further actions required.
• Inspects compliance pertaining to Qatari/Ashghal building, fire, safety, handicap and environmental codes and regulations. Informs the Construction Manager of any areas of non compliance, identifies corrective action and agrees with PMC partner company
• Inspects safety aspects of jobs in progress; encourages contractors to observe applicable safety rules and regulations. Informs the Construction Manager of any areas of non compliance, identifies corrective action and agrees with PMC partner company
Company : HBK REFERANS Trading Company
Country : QATAR
Description : Design Engineer Objectives:
Provide safe and most technically effective solutions for client and most cost effective for HBK REFERANS
Meet project deadlines to ensure excellent quality of service
Key Tasks and Responsibilities:
Design of customized concrete forming/shoring solutions
Develop computerized drawings, material lists and calculations
Work closely with sales team and customer to understand project needs and develop the most suitable project solutions
Communicate effectively between all PERI departments and work together to provide excellent customer experience
Provide technical support to customers
Comply with agreed company processes and procedures
Perform duties in compliance with overall company goals
Requirements:
Bachelor's degree in Civil or Construction Engineering
One year of relevant experience preferred
Ability to read and understand blueprints
Excellent communication and interpersonal skills with the ability to communicate effectively with all levels of the organization, as well as with customers
AutoCAD experience required
Working knowledge of Microsoft Office
Continuous improvement and quality mindset
Country : Qatar
Description : Mechanical Engineer
Consultancy Company looking to hire a Mechanical Engineer.
Requirements/Qualifications:
• UPDA certified Grade A or B with 10 years’ Experience or more is a must.
• Familiar of FF, ventilation and HVAC. Plumbing.
• Designing.
• Site supervision & execution.
• Preferable experience in Consultancy.
• Salary Between Qar. 8,000 To Qar. 12,000
• Send your UPDA License along with your resume
Description : - Must be available locally - Must be fluent in Arabic - Minimum of 15 years' experience year - Post graduate experience (Civil Engineering / Architecture / Construction management background) - Manage all project deliverable's in accordance with Regulatory and Statutory undertakings, complying with all Health & Safety and Environmental standards and policies. - Ensure FM/Maintenance projects are completed on budget and on schedule.
ESTIMATION ENGINEER (MALE/FEMALE)
JOB DESCRIPTION:
Providing detailed estimates for a project based on the construction drawings, specifications, and scope of work.
Responsible for the communication of bids and scope of work to PM, Supervisors, and Contractors/Sub-contractor in a clear and easy-to-understand manner.
CORE TASKS, DUTIES, AND RESPONSIBILITIES:
• Responsible for providing complete quantity take-off, analysis, and estimate, and studies for all deliverables involved in the assigned scope
• Identify design and constructability issues and analysis to determine constructability
• Define more cost-efficient alternatives to the proposed scope of project
• Act as a connection between subcontractors, design team (architects, engineers, consultants), and client
• Responsible for preparing and assembling bids and proposals for various contract types
• Determine required but non indicated scope through the analysis of site conditions and all contract documents (plans specifications, etc.)
• Collaborate with operations staff and other estimators to ensure that General Conditions and Requirement items are appropriately captured in the estimate
• Perform assessment on subcontractor proposals to ascertain if scope is covered and also manage the risk of scope gaps
• Proffer suggestions to the Chief Estimator or appropriate authority for contemplated expenditures.
REQUIRED SKILLS:
• Previous working experience as Estimation Engineer for (2) years
• Should be independently capable of preparing quotations & proposals for Electrical & ELV systems
• In-depth knowledge of project management
• Hands on experience with complex data research activities
• Good understanding of data analysis methods and KPIs
• Familiarity with relevant computer programs
• BE in Electrical or similar relevant field
The role holder have the responsibility for leading the Civil Projects discipline to ensure that Projects in the Company are executed in an efficient and systematic manner and according to good engineering practices and to the Company s goals and objectives.The role holder is to lead a team of civil and structural engineers and designers and to act as point of reference and apply technical expertise to resolve problems escalated by the project coordinators or project engineers. He is responsible to approve internally generated engineering documents like drawings / calculations etc. He may has a prime role, whenever he is assigned the role of Task Force leader, in coordinating with multiple disciplines and customers to ensure smooth-running of a collection of projects. He compiles and provides input to the periodic reports within his area of work. He must ensure that all activities are carried out in compliance with Company s Occupational Health, Safety, Energy and Environment procedures.MINIMUM QUALIFICATIONS & EXPERIENCE REQUIRED:• Bachelor s Degree in Civil Engineering, MSc degree in Civil or Structural Engineering and PMP are preferences.• Extensive knowledge of standards, guidelines and regulations in the field of civil engineering• Has proven leadership capacity and experienceMinimum of 10 years of direct experience in the similar role preferably the Oil & Gas, Petrochemical, and Fertilizer Industry
Honeywell----
Your main duties will include the overall co-ordination, leading and management of a team of engineers; efficient design and delivery of the IBMS, DVM and Temaline Security systems; network infrastructure design, installation and commissioning support, and 3rd party product integration with EBI to include EBI support and trouble shooting with the ability to complete basic log file analysis. EBI Custom Application Programming (i.e. Interface with Peoplesoft, SAP, CHOM, Identity management). DVM and Access Control Systems design, installation, commissioning support and integration with other systems. Created with SnapFacilitate issue identification and analysisInvestigate and resolve technical issuesBuild relationships with customersLead Team AlignmentYOU MUST HAVE Bachelor's degree, or equivalent. Some experience in the field. Extensive experience working in a projects environment, with comprehensive on-site knowledge Advanced knowledge of networking, database technology, integration protocols, and current trends in the industry. Proven track record in a project design and engineering capacity involved in the delivery of technology based projects WE VALUE Willingto develop extensive product knowledge in formal training, and in “on the job†environments, working with latest Honeywell technology. Extensive customer facing experience Experience in the industry is preferred Excellent interpersonal and verbal & written communication skills Strong continuous improvement mindset, strong leadership impact Experience with Salesforce.com and SharePoint Demonstrated experience with Knowledge Management & Call Center Management Good administration skills Demonstrated management skills INCLUDES Continued Professional Development ADDITIONAL INFORMATION Category: Engineering
Job description: 1) Sr. Inspection Engineer
Education : B.E/B.Tech Mechanical Engineering
Experience : 2-4 years’ Experience in the field of Lifting Equipment and Lifting Accessories
The engineer should have relevant knowledge and accreditation experience in DAC/ENAS.
Driving license and knowledge in Elevator/ Escalator is an added advantage.
VAM Systems WLL is currently looking for IT Security Engineer for our Qatar operations with the following skillsets & terms and conditions:
Skill set required
Any certifications CEH,CISSP,CISA
3-5 years of relevant experience
Experience in operational SOC
Hands on experience in IT with emphasis in Network Security
Experience in vulnerability testing and auditing
Experience performing a Systems Engineer, Consultant or Architect role
Knowledge of system security vulnerabilities and remediation techniques
Knowledge of network and web related protocols (e.g., TCP/IP, UDP, IPSEC, HTTP, HTTPS, routing protocols, etc.)
Must be fully knowledgeable and able to design, plan, and support deployment efforts around IT security solutions using one or more of the following technologies
1. Network Security
2. Endpoint & Mobile Security
3. Visualization Security
4. Identity & Access management
5. Security Management and Operations
6. Encryption & VPN
7. Application Security (including web/cloud and database)
8. Anti-Malware Solutions
9. Web & Email Gateways
Position Summary:
Civil Site Engineer for Doha Airport Expansion Project
Role Description:
Key Responsibilities/KRAs/KPIs: Organizing materials and ensuring sites are safe and clean.
Preparing cost estimates and ensuring appropriate materials and tools are available.
Providing technical advice and suggestions for improvement at execution.
Diagnosing and troubleshooting equipment as required.
Negotiating with suppliers and vendors to ensure the best contracts.
Authorizing technical drawings and engineering plans.
Drawing up work schedules and communicating any adjustments to crew members and clients.
Gathering data, compiling reports, and delivering presentations to relevant stakeholders.
Delegating tasks and scheduling meetings and training sessions where required.
Completing quality assurance and providing feedback to the team.
Company : Focus Design Partners
Country : Qatar
Description : For applicant currently living in Qatar a MMUP License, NOC & Transferable is REQUIRED.
Mechanical Engineer shall provide leadership and comprehensive mechanical engineering support in planning developing and supervising mechanical installations, operations and building equipment. Capable of reviewing contractor’s submittals & proposed materials. Has full understanding of firefighting & building safety codes: i.e NFPA 101, Ashrea.. etc
Job description / Role
• Developing sustainable building services designs for commercial, educational, health care facilities, residential, tall tower, Infrastructure and mixed-use developments projects.
• Knowledge of ventilation and air conditioning systems and a successful track record of delivering detailed designs to the highest international standards.
• Performing engineering evaluations, Design reports, conceptual and final design.
• Have the basic knowledge of other mechanical systems, including but not limited to Firefighting, plumbing and gas distribution systems.
• Preparation of mechanical engineering calculation in support of systems’ design.
• Evaluating and analyzing statistical data, customer design proposals, specifications and manuals to determine feasibility of design or application.
• Working knowledge of various building services design codes such as British Standards, ASHRAE, NFPA, UPC,IPC, IMC and other International design codes. Knowledge in local Codes in Qatar QCS and QCDD has an added value.
• Interfacing, coordinating and working with the Arch, Structural and MEP design team in a professional manner to achieve project goals.
Requirements
• Bachelor’s Degree in Mechanical Engineering.
• 5 to 7 years of experience, with Major Exp into HVAC Design.
• Excellent communication and time management skills.
• Experience using computer HVAC design tools, AutoCAD, Revit MEP is essential.
AECOM is seeking a Mechanical Construction Engineer for an anticipated position supporting a construction effort in the country of Qatar. The mechanical engineer will research and analyze data such as customer design proposal, specifications, and manuals to determine feasibility of design or application. Provide mechanical design service including determination of HVAC loads, equipment selection, duct sizing and routing, interior plumbing design, exterior plumbing design, and fire protection systems. The work location for this position in Qatar. • Research and analyze data such as customer design proposal, specifications, and manuals to determine feasibility of design or application. • Design products or systems in support of facilities' infrastructure, research, or maintenance requirements. • Coordinate, troubleshoot, and approve installation activities as inspection services to ensure products and systems conform to engineering design and specifications. • Establish mechanical engineering design criteria and provide guidance and evaluation for facility projects; determine HVAC loads, complete equipment selection, perform duct sizing and routing, design interior/exterior plumbing and fire protection systems. • Able to serve as the alternate project lead in the absence of the site manager. • Perform all other position related duties as assigned or requested.
Supports the SPM Engineering and Interfaces Manager in providing direction and management of the Electrical design requirements for the Lusail project. • Interfaces with the Consultant’s Design Team to monitor schedule and budget performance. Reviews, coordinates and monitors the works of all Electrical designers to provide guidance regarding the vision of Lusail and project requirements and specifications. • A key function is to manage the responses to design RFIs, review/comment on Change Orders, and provide overall supervision for the design direct reports, while managing schedule and budget control. • Responsible for management of the delivery of the design of the various Electrical projects by verifying consistency in the design with respect to adherence to the design criteria and required standards. • Participates in the VE and manage all VE studies, constructability and other workshops; and drives the on-schedule submittal of the Electrical design deliverables. • Keeps Project Management Team constantly informed as to changes made in the field to ensure timely processing of contract change orders. • Prepares weekly work load reports, monitors the progress of work accomplished and reports to the higher management and the client. • Serves as primary interface with the design consultants in performing design reviews or addressing construction-related issues related to the electrical systems. • Regularly interacts with the client to share and understand the on-going design and construction issues • Maintains overall knowledge of drawings, specifications, general contracts and time schedules related to the various Electrical works. • Ensures all Electrical design works are comprehensive and discussed with the various engineers for the best implementation and installation of services in coordination with other parties and contractor. • May participate in negotiations with regulatory agencies in public meetings to support the client in matters related to the Electrical works. • Provides necessary technical support and design review / audit services to project management team ensuring the correctness and quality of implementation of requirements. • Understands all related codes and their application to the project; and overseas/manages the interface with local agencies to coordinate design standards usage and monthly approvals’ process
Responsibilities:
• MPE will be responsible for the preparation of yearly PPM planner and ensuring the timely completion and monitoring day to day activities of Maintenance task.
• MPE will be solely responsible for equipment availability, availability of critically identified spare for all main and sub system of District Cooling Plant which include Reverse Osmosis plant.
• Responsible for condition monitoring like vibration analysis, oil analysis, periodical chiller eddy current test yearly calibration for control and instruments, condition assessment for GRP water tanks and forecasting the risk associated with major plant equipment to avoid the mishap.
• Responsible for periodical training to the in house staff for the enhancement of job knowledge
• Maintenance Planning Engineer is responsible to motivate our team and expedite the materials on time.
• Responsible to work with the Maintenance Engineer/Supervisor in developing the scheduled/unscheduled maintenance programs and processes for the chilled water production facility to minimize the impact on CHW production.
• Responsible to pre-evaluate the need for replacement of parts and places the orders.
• Responsbile for planning maintenance work orders, the repairs, servicing and efficient functioning of all machinery and equipment in a plant.
• MPE and maintenance engineer/supervisor will work together with operations to meet present and future goals.
• MPE’s duties would include managing maintenance data collection and information gathering to more effectively provide the planned maintenance service in future utilization of CMMS software.
• Responsible to keep operating the equipment in the condition to deliver full design duty (reliability), to insure plant and equipment run properly when it is required for operation, to correct equipment and machines when the design duty cannot be achieved and then return them to design specification, and maintain assets most profitably for the life of the organization (life cycle profit).
• MPE supports the written safety program that facilitates continuous improvement in the severity and frequency of accidents resulting in no Lost Time Accidents and insuring the safety of all employees.
• Responsible to ensure timely delivery of daily, monthly, and yearly O&M reports from Plant Engineer / Sr. O&M Engineer to O&M Manager.
• Obligate subordinates to direct and enforce the safety program.
• Organizes training and provides appropriate documentation of training for the staff.
• Responsible to update the work order status in CMMS.
• Responsible to ensure all the plant/Network/ETS equipment is running under good condition, all the maintenance activities are as per the PPM planner schedule. Any deviations and mitigations needs to be planned and communicated to O&M Manager.
Company : PENINSULAR PETROTECH ENGINEERING
Country : Qatar
Description : Mechanical Qc engineer with 7 years of experience in EPC oil and gas, petrochemical
Plan, prioritise and manage multiple engineering projects, within budget, on schedule, safety and of the required quality. Prioritise tasks and assign team members to ensure that the team’s overall resources are used effectively and that project deadlines are met. Criteria: 5 years and above working experience as Project Manager in Oil and Gas EPCC sector Degree in Engineering - Mechanical
ompany : Lotus Trading & Contracting Co.
Country : Qatar
Description : CIVIL QA-QC ENGINEERS/INSPECTORS - Applicants must be a graduate of Bachelor's Degree in Civil Engineering, with 02-03 years work experience in handling QA/QC works for an infrastructure projects particularly roadworks and drainage systems, a resident of Doha and with transferable visa.
NES Qatar-------
To qualify, candidate must possess the following qualification and experience:
Qualification: Master degree in structural system engineering,
Experience: minimum 10 years’ experience as structural engineer in structural field in Oil and Gas activities. Extensive experience in structural engineering with relevant experience within the offshore oil and gas production industry,
Experience in offshore facilities or FSO, FPSO is a plus,
Available for technical missions worldwide,
Familiar with Total GS, MOQ standards and relevant codes and standards,
Language: Fluent English.
Computer literate, especially in structural calculation softwares.
Strong leadership skills and good communication skills.
Ability to work on projects in a complex and multicultural environment.
Good analytical skills.
Company : Al Jazeera Street, Bin Mahmoud
Country : Qatar
Description : - An Engineering Consultancy Company.
- Minimum 2-3 years experience.
- Male.
- Salary will be discuss upon interview.
Note : Only shortlisted candidates will be contacted.
Company : Dar Al Sahra Energy services
Country : Qatar
Description : QHSE/QAQC officer/engineer with experience in ISO requirements
dolphinqatar
Country : qatar
Description : PROJECT ENGINEER=12 years’ experience in site project. NOC must require.
FOR APPLICANT INSIDE QATAR
Quality Engineer/ Controller.
Education : Any Degree
Experience : 1-4 years’ Experience as a Quality controller in the field of Inspection Bodies.
The candidate should have relevant knowledge in ISO 1720, ISO 17024 and Integrated management system related with the accreditation experience in DAC/ENAS.
Elevator/Escalator Inspection Engineer
Education : B.E/B.Tech Mechanical/ Electrical Engineering
Experience : 1-3 years’ Experience in the field of Elevator, Escalator and Moving Walk ways.
The engineer should have relevant knowledge and accreditation experience in DAC/ENAS.
Driving license is an added advantage.
DUTIES AND RESPONSIBILITIES: - Assume all responsibilities related to project hydraulic works such as design, analysis, etc. - Assist in design and provide recommendations hydraulic parameters of deep tunnel (Micro Tunnel, TBM etc.), pipes, conduits, design calculations and assessments etc. - Assist in external and internal coordination pertinent to hydraulic works and design. - Review, comment, recommend acceptance or otherwise on contractors’ and consultants’ submissions. - Liaise with utilities providers and stakeholders.
Provide support and co-ordinate with Senior Architect on all Architectural works related construction/design drawing related issues during the course of projects as and when required. Maintain an overview of entire project progress, quality control and safety review on general construction practices accepted by standard code of practices, while continuing to attend to all technicalities review related to the project.
Key Accountabilities / Responsibilities:
• Performs engineering design tasks for master planning and roadway projects from preliminary stage to final design.
• Develops plans, specifications, cost estimates, reports and prepares final bid packages.
• Establishes working relationships and networks with client technical staff and project managers.
• Provides engineering design services on traditional design-bid-build projects and design-build highway projects.
• Manages and mentors’ junior engineers on project assignments
• Organizes meetings between design staff, subcontractors and client managers to coordinate design activities.
• Coordinates the planning, staffing, scheduling, budget management and quality control of subcontractors and internal technical & support staff.
• Highly participates in project decisions regarding technical approaches, cost and scheduling performance.
• Projects Quality Assurance and Quality Controls.
• Assists project managers with other various tasks when required.
• Displays significant proficiency in the design of local roads, highways as per QHDM and other acceptable international standards.
Prepare, schedule, coordinate, and monitor all assigned projects.
• Responsible for security, health and safety. The main source of technical advice and quality control for everyone working on site.
• Organizing and supervising materials and people. Agree the price and oversee the choice for materials to be used on the project.
• Mark out the site, make sure designs are applied correctly and liaise with main and sub-contractors and the site manager.
• Regular liaison with the client, its representatives, and any consultants.
• Levelling and surveying a site, checking drawings and quantities and ensuring the accuracy of calculations.
• Compile estimates for technical and material requirements for project development.
• Suggest process and technical design changes to improve performance and efficiency.
• Prepare proposal documents and presentations. Maintain detailed documentation of all site engineering activities.
• Compile and present reports explaining project details.
• Liaise with the local authority (where appropriate to the project) to ensure compliance with local construction regulations and by-laws.
• Monitor project progress, compliance with design specifications and safety standards.
• Direct engineering activities; assign tasks, provide training and support.
• Create work schedules and adjust as needed to meet project deadlines.
• Maintain quality control in every area (budget, scheduling, planning, personnel performance, team dynamics).
• Communicate effectively with project manager and other project participants in order to provide needed assistance and technical support.
• Reviewing engineering deliverables; initiate appropriate corrective actions throughout the project life-cycle.
• Plan the work to be done and organize things so that deadlines are met.
Requirements
• Prepare, schedule, coordinate, and monitor all assigned projects.
• Responsible for security, health and safety. The main source of technical advice and quality control for everyone working on site.
• Organizing and supervising materials and people. Agree the price and oversee the choice for materials to be used on the project.
• Mark out the site, make sure designs are applied correctly and liaise with main and sub-contractors and the site manager.
• Regular liaison with the client, its representatives, and any consultants.
• Leveling and surveying a site, checking drawings and quantities and ensuring the accuracy of calculations.
• Compile estimates for technical and material requirements for project development.
• Suggest process and technical design changes to improve performance and efficiency.
• Prepare proposal documents and presentations. Maintain detailed documentation of all site engineering activities.
Job Descriptions :
Serves as a full time representative of the contractor to the client and its representatives.
Responsible for the project management plan.
Guides, orient, organize and monitor the various professional people working on the project.
Communicates and specifies clearly the tasks and the contributions of each project member.
Conducts follow up meeting on a regular basis and ensures everybody is on track.
Ensures that all corresponding reports such as monthly, weekly, and other different type of reports as per
requirements are being submitted in a timely and efficient manner.
Main responsible for the procurement management plan.
Main responsible to manage all subcontractors and suppliers.
Responsible for the development and of the implementation of the master plan or baseline in coordination
Blue Wings----
Description : 3 - 5 years experienced Environmental Engineer required.
Environmental qualification is mandatory. Other certifications will be an added advantage.
Middle East/Qatar experience is 1st preference.
Need to be on your own (Freelancer) Qatar visa. Should be with valid QID.
Willing to work on Manpower Supply.
Working hours 10 hours per day, 6 days a week.
Duration, 1 month and extendable.
With an expected salary?
Garden House Center
Category : Engineering
Description : A reputed Landscaping Company in Qatar is urgently looking to hire for the following positions: 1. IRRIGATION ENGINEER: Bachelor of Irrigation Engineering. 5 years of relevant experience with minimum 3 years in GCC. Experience in Construction and Maintenance of Landscaping projects. 2. IRRIGATION FOREMAN: Diploma/Certificate in Irrigation. Minimum 5 years of relevant experience with 3 years in GCC. Experience in Construction and Maintenance of Landscaping projects. Note: All the above requirements are urgent. Only for candidates who are locally available in Qatar with Transferable Visa. Interested people can share their profile
Review and provide feedback to design reviews apart from analyzing and interpreting the impact on the performance and utilization of asset base.
• Undertake minor design works and liaise various stakeholders for follow-up and approval.
• Contribute to annual investment plan and work as team with Operations Engineers and Section Heads to assist in developing, accessing and prioritizing the DNO&M asset investment needs.
• Provide asset performance and trend analysis. Track performance against the DNO&M plan, identifying areas of non-compliance with proposed high level solutions
• Carrying out risk review and associated processes.
• Deliver accurate robust plans for long term (greater than five years) Operations and Maintenance requirements
• Creating job order using EAMS (Enterprise asset management system).
• Prepare the annual Asset Management Plan
• Liaise with Engineers and Contractors to carry out necessary activities to ensure effective operation, maintenance of DNO&M Assets
• Undertake the project delivery by preparing the scope document and BOQ for the purposes of tendering.
• Review tender submissions and provide recommendations on technical aspects
• Adhere to Health and Safety Policy and Procedures in the workplace and comply with any new work instructions
Requirements
• Bachelor degree in engineering/relevant subject
• Chartered Member of a relevant professional body (e.g. IAM, CIWEM, ICE or equivalent)
• Current/valid Qatar Driving Licence would be an advantage
Ashghal
Assists the Project Manager and Construction Manager to ensure that the construction elements of public building construction projects are being completed according to time, budget and Ashghal accepted quality standards.
• Assists the Construction Manager to monitor the work completed by the PMC partner company on the development of construction contract package. This could include architectural, civil, electrical and mechanical aspects of technical design, drawings and specifications, engineering estimates and project budgets and job scheduling
• Analyses survey reports, maps, drawings, blueprints, topographical and geologic data to provide inputs to Construction Manager for inclusion in tender documents for PMC contracts.
• Visit PMC partner companies and/or third party contractors to monitor and identify any issues relating to construction project timeliness, quality and consistency of work and adherence to contract terms.
• Works closely with PMC partner companies and/or third party sub contractors to interpret and explain plans and contract pertaining to the civil and structural dimensions of the project.
• As directed by the Construction Manager and/or Project Manager inspect construction sites on a periodical basis to ensure conformance to design specifications and adherence to quality.
• Resolves within level of authority or raise concerns regarding modifications or structural changes to Construction Manager.
• Interprets, explains and enforces regulations, ordinances and policies to PMC partner companies and /or third party sub contractors and confer with Construction Manager regarding possible changes to plans and problem resolution.
• Ensures that PMC partner companies produce regular reports on damages, accidents, delays, bad weather, or emergencies at construction sites.
• Liaise with PMC partner companies to ensure validity/accuracy of report and that any resulting corrective action has been implemented. Liaise on a regular basis with the Construction Manager to inform of progress and agree on any further actions required.
• Inspects compliance pertaining to Qatari/Ashghal building, fire, safety, handicap and environmental codes and regulations. Informs the Construction Manager of any areas of non compliance, identifies corrective action and agrees with PMC partner company
• Inspects safety aspects of jobs in progress; encourages contractors to observe applicable safety rules and regulations. Informs the Construction Manager of any areas of non compliance, identifies corrective action and agrees with PMC partner company
Company : HBK REFERANS Trading Company
Country : QATAR
Description : Design Engineer Objectives:
Provide safe and most technically effective solutions for client and most cost effective for HBK REFERANS
Meet project deadlines to ensure excellent quality of service
Key Tasks and Responsibilities:
Design of customized concrete forming/shoring solutions
Develop computerized drawings, material lists and calculations
Work closely with sales team and customer to understand project needs and develop the most suitable project solutions
Communicate effectively between all PERI departments and work together to provide excellent customer experience
Provide technical support to customers
Comply with agreed company processes and procedures
Perform duties in compliance with overall company goals
Requirements:
Bachelor's degree in Civil or Construction Engineering
One year of relevant experience preferred
Ability to read and understand blueprints
Excellent communication and interpersonal skills with the ability to communicate effectively with all levels of the organization, as well as with customers
AutoCAD experience required
Working knowledge of Microsoft Office
Continuous improvement and quality mindset
Country : Qatar
Description : Mechanical Engineer
Consultancy Company looking to hire a Mechanical Engineer.
Requirements/Qualifications:
• UPDA certified Grade A or B with 10 years’ Experience or more is a must.
• Familiar of FF, ventilation and HVAC. Plumbing.
• Designing.
• Site supervision & execution.
• Preferable experience in Consultancy.
• Salary Between Qar. 8,000 To Qar. 12,000
• Send your UPDA License along with your resume
Description : - Must be available locally - Must be fluent in Arabic - Minimum of 15 years' experience year - Post graduate experience (Civil Engineering / Architecture / Construction management background) - Manage all project deliverable's in accordance with Regulatory and Statutory undertakings, complying with all Health & Safety and Environmental standards and policies. - Ensure FM/Maintenance projects are completed on budget and on schedule.
ESTIMATION ENGINEER (MALE/FEMALE)
JOB DESCRIPTION:
Providing detailed estimates for a project based on the construction drawings, specifications, and scope of work.
Responsible for the communication of bids and scope of work to PM, Supervisors, and Contractors/Sub-contractor in a clear and easy-to-understand manner.
CORE TASKS, DUTIES, AND RESPONSIBILITIES:
• Responsible for providing complete quantity take-off, analysis, and estimate, and studies for all deliverables involved in the assigned scope
• Identify design and constructability issues and analysis to determine constructability
• Define more cost-efficient alternatives to the proposed scope of project
• Act as a connection between subcontractors, design team (architects, engineers, consultants), and client
• Responsible for preparing and assembling bids and proposals for various contract types
• Determine required but non indicated scope through the analysis of site conditions and all contract documents (plans specifications, etc.)
• Collaborate with operations staff and other estimators to ensure that General Conditions and Requirement items are appropriately captured in the estimate
• Perform assessment on subcontractor proposals to ascertain if scope is covered and also manage the risk of scope gaps
• Proffer suggestions to the Chief Estimator or appropriate authority for contemplated expenditures.
REQUIRED SKILLS:
• Previous working experience as Estimation Engineer for (2) years
• Should be independently capable of preparing quotations & proposals for Electrical & ELV systems
• In-depth knowledge of project management
• Hands on experience with complex data research activities
• Good understanding of data analysis methods and KPIs
• Familiarity with relevant computer programs
• BE in Electrical or similar relevant field
The role holder have the responsibility for leading the Civil Projects discipline to ensure that Projects in the Company are executed in an efficient and systematic manner and according to good engineering practices and to the Company s goals and objectives.The role holder is to lead a team of civil and structural engineers and designers and to act as point of reference and apply technical expertise to resolve problems escalated by the project coordinators or project engineers. He is responsible to approve internally generated engineering documents like drawings / calculations etc. He may has a prime role, whenever he is assigned the role of Task Force leader, in coordinating with multiple disciplines and customers to ensure smooth-running of a collection of projects. He compiles and provides input to the periodic reports within his area of work. He must ensure that all activities are carried out in compliance with Company s Occupational Health, Safety, Energy and Environment procedures.MINIMUM QUALIFICATIONS & EXPERIENCE REQUIRED:• Bachelor s Degree in Civil Engineering, MSc degree in Civil or Structural Engineering and PMP are preferences.• Extensive knowledge of standards, guidelines and regulations in the field of civil engineering• Has proven leadership capacity and experienceMinimum of 10 years of direct experience in the similar role preferably the Oil & Gas, Petrochemical, and Fertilizer Industry
Honeywell----
Your main duties will include the overall co-ordination, leading and management of a team of engineers; efficient design and delivery of the IBMS, DVM and Temaline Security systems; network infrastructure design, installation and commissioning support, and 3rd party product integration with EBI to include EBI support and trouble shooting with the ability to complete basic log file analysis. EBI Custom Application Programming (i.e. Interface with Peoplesoft, SAP, CHOM, Identity management). DVM and Access Control Systems design, installation, commissioning support and integration with other systems. Created with SnapFacilitate issue identification and analysisInvestigate and resolve technical issuesBuild relationships with customersLead Team AlignmentYOU MUST HAVE Bachelor's degree, or equivalent. Some experience in the field. Extensive experience working in a projects environment, with comprehensive on-site knowledge Advanced knowledge of networking, database technology, integration protocols, and current trends in the industry. Proven track record in a project design and engineering capacity involved in the delivery of technology based projects WE VALUE Willingto develop extensive product knowledge in formal training, and in “on the job†environments, working with latest Honeywell technology. Extensive customer facing experience Experience in the industry is preferred Excellent interpersonal and verbal & written communication skills Strong continuous improvement mindset, strong leadership impact Experience with Salesforce.com and SharePoint Demonstrated experience with Knowledge Management & Call Center Management Good administration skills Demonstrated management skills INCLUDES Continued Professional Development ADDITIONAL INFORMATION Category: Engineering
Job description: 1) Sr. Inspection Engineer
Education : B.E/B.Tech Mechanical Engineering
Experience : 2-4 years’ Experience in the field of Lifting Equipment and Lifting Accessories
The engineer should have relevant knowledge and accreditation experience in DAC/ENAS.
Driving license and knowledge in Elevator/ Escalator is an added advantage.
VAM Systems WLL is currently looking for IT Security Engineer for our Qatar operations with the following skillsets & terms and conditions:
Skill set required
Any certifications CEH,CISSP,CISA
3-5 years of relevant experience
Experience in operational SOC
Hands on experience in IT with emphasis in Network Security
Experience in vulnerability testing and auditing
Experience performing a Systems Engineer, Consultant or Architect role
Knowledge of system security vulnerabilities and remediation techniques
Knowledge of network and web related protocols (e.g., TCP/IP, UDP, IPSEC, HTTP, HTTPS, routing protocols, etc.)
Must be fully knowledgeable and able to design, plan, and support deployment efforts around IT security solutions using one or more of the following technologies
1. Network Security
2. Endpoint & Mobile Security
3. Visualization Security
4. Identity & Access management
5. Security Management and Operations
6. Encryption & VPN
7. Application Security (including web/cloud and database)
8. Anti-Malware Solutions
9. Web & Email Gateways
Position Summary:
Civil Site Engineer for Doha Airport Expansion Project
Role Description:
Key Responsibilities/KRAs/KPIs: Organizing materials and ensuring sites are safe and clean.
Preparing cost estimates and ensuring appropriate materials and tools are available.
Providing technical advice and suggestions for improvement at execution.
Diagnosing and troubleshooting equipment as required.
Negotiating with suppliers and vendors to ensure the best contracts.
Authorizing technical drawings and engineering plans.
Drawing up work schedules and communicating any adjustments to crew members and clients.
Gathering data, compiling reports, and delivering presentations to relevant stakeholders.
Delegating tasks and scheduling meetings and training sessions where required.
Completing quality assurance and providing feedback to the team.
Company : Focus Design Partners
Country : Qatar
Description : For applicant currently living in Qatar a MMUP License, NOC & Transferable is REQUIRED.
Mechanical Engineer shall provide leadership and comprehensive mechanical engineering support in planning developing and supervising mechanical installations, operations and building equipment. Capable of reviewing contractor’s submittals & proposed materials. Has full understanding of firefighting & building safety codes: i.e NFPA 101, Ashrea.. etc
Job description / Role
• Developing sustainable building services designs for commercial, educational, health care facilities, residential, tall tower, Infrastructure and mixed-use developments projects.
• Knowledge of ventilation and air conditioning systems and a successful track record of delivering detailed designs to the highest international standards.
• Performing engineering evaluations, Design reports, conceptual and final design.
• Have the basic knowledge of other mechanical systems, including but not limited to Firefighting, plumbing and gas distribution systems.
• Preparation of mechanical engineering calculation in support of systems’ design.
• Evaluating and analyzing statistical data, customer design proposals, specifications and manuals to determine feasibility of design or application.
• Working knowledge of various building services design codes such as British Standards, ASHRAE, NFPA, UPC,IPC, IMC and other International design codes. Knowledge in local Codes in Qatar QCS and QCDD has an added value.
• Interfacing, coordinating and working with the Arch, Structural and MEP design team in a professional manner to achieve project goals.
Requirements
• Bachelor’s Degree in Mechanical Engineering.
• 5 to 7 years of experience, with Major Exp into HVAC Design.
• Excellent communication and time management skills.
• Experience using computer HVAC design tools, AutoCAD, Revit MEP is essential.
AECOM is seeking a Mechanical Construction Engineer for an anticipated position supporting a construction effort in the country of Qatar. The mechanical engineer will research and analyze data such as customer design proposal, specifications, and manuals to determine feasibility of design or application. Provide mechanical design service including determination of HVAC loads, equipment selection, duct sizing and routing, interior plumbing design, exterior plumbing design, and fire protection systems. The work location for this position in Qatar. • Research and analyze data such as customer design proposal, specifications, and manuals to determine feasibility of design or application. • Design products or systems in support of facilities' infrastructure, research, or maintenance requirements. • Coordinate, troubleshoot, and approve installation activities as inspection services to ensure products and systems conform to engineering design and specifications. • Establish mechanical engineering design criteria and provide guidance and evaluation for facility projects; determine HVAC loads, complete equipment selection, perform duct sizing and routing, design interior/exterior plumbing and fire protection systems. • Able to serve as the alternate project lead in the absence of the site manager. • Perform all other position related duties as assigned or requested.
Supports the SPM Engineering and Interfaces Manager in providing direction and management of the Electrical design requirements for the Lusail project. • Interfaces with the Consultant’s Design Team to monitor schedule and budget performance. Reviews, coordinates and monitors the works of all Electrical designers to provide guidance regarding the vision of Lusail and project requirements and specifications. • A key function is to manage the responses to design RFIs, review/comment on Change Orders, and provide overall supervision for the design direct reports, while managing schedule and budget control. • Responsible for management of the delivery of the design of the various Electrical projects by verifying consistency in the design with respect to adherence to the design criteria and required standards. • Participates in the VE and manage all VE studies, constructability and other workshops; and drives the on-schedule submittal of the Electrical design deliverables. • Keeps Project Management Team constantly informed as to changes made in the field to ensure timely processing of contract change orders. • Prepares weekly work load reports, monitors the progress of work accomplished and reports to the higher management and the client. • Serves as primary interface with the design consultants in performing design reviews or addressing construction-related issues related to the electrical systems. • Regularly interacts with the client to share and understand the on-going design and construction issues • Maintains overall knowledge of drawings, specifications, general contracts and time schedules related to the various Electrical works. • Ensures all Electrical design works are comprehensive and discussed with the various engineers for the best implementation and installation of services in coordination with other parties and contractor. • May participate in negotiations with regulatory agencies in public meetings to support the client in matters related to the Electrical works. • Provides necessary technical support and design review / audit services to project management team ensuring the correctness and quality of implementation of requirements. • Understands all related codes and their application to the project; and overseas/manages the interface with local agencies to coordinate design standards usage and monthly approvals’ process
Responsibilities:
• MPE will be responsible for the preparation of yearly PPM planner and ensuring the timely completion and monitoring day to day activities of Maintenance task.
• MPE will be solely responsible for equipment availability, availability of critically identified spare for all main and sub system of District Cooling Plant which include Reverse Osmosis plant.
• Responsible for condition monitoring like vibration analysis, oil analysis, periodical chiller eddy current test yearly calibration for control and instruments, condition assessment for GRP water tanks and forecasting the risk associated with major plant equipment to avoid the mishap.
• Responsible for periodical training to the in house staff for the enhancement of job knowledge
• Maintenance Planning Engineer is responsible to motivate our team and expedite the materials on time.
• Responsible to work with the Maintenance Engineer/Supervisor in developing the scheduled/unscheduled maintenance programs and processes for the chilled water production facility to minimize the impact on CHW production.
• Responsible to pre-evaluate the need for replacement of parts and places the orders.
• Responsbile for planning maintenance work orders, the repairs, servicing and efficient functioning of all machinery and equipment in a plant.
• MPE and maintenance engineer/supervisor will work together with operations to meet present and future goals.
• MPE’s duties would include managing maintenance data collection and information gathering to more effectively provide the planned maintenance service in future utilization of CMMS software.
• Responsible to keep operating the equipment in the condition to deliver full design duty (reliability), to insure plant and equipment run properly when it is required for operation, to correct equipment and machines when the design duty cannot be achieved and then return them to design specification, and maintain assets most profitably for the life of the organization (life cycle profit).
• MPE supports the written safety program that facilitates continuous improvement in the severity and frequency of accidents resulting in no Lost Time Accidents and insuring the safety of all employees.
• Responsible to ensure timely delivery of daily, monthly, and yearly O&M reports from Plant Engineer / Sr. O&M Engineer to O&M Manager.
• Obligate subordinates to direct and enforce the safety program.
• Organizes training and provides appropriate documentation of training for the staff.
• Responsible to update the work order status in CMMS.
• Responsible to ensure all the plant/Network/ETS equipment is running under good condition, all the maintenance activities are as per the PPM planner schedule. Any deviations and mitigations needs to be planned and communicated to O&M Manager.
Company : PENINSULAR PETROTECH ENGINEERING
Country : Qatar
Description : Mechanical Qc engineer with 7 years of experience in EPC oil and gas, petrochemical
Plan, prioritise and manage multiple engineering projects, within budget, on schedule, safety and of the required quality. Prioritise tasks and assign team members to ensure that the team’s overall resources are used effectively and that project deadlines are met. Criteria: 5 years and above working experience as Project Manager in Oil and Gas EPCC sector Degree in Engineering - Mechanical
ompany : Lotus Trading & Contracting Co.
Country : Qatar
Description : CIVIL QA-QC ENGINEERS/INSPECTORS - Applicants must be a graduate of Bachelor's Degree in Civil Engineering, with 02-03 years work experience in handling QA/QC works for an infrastructure projects particularly roadworks and drainage systems, a resident of Doha and with transferable visa.
NES Qatar-------
To qualify, candidate must possess the following qualification and experience:
Qualification: Master degree in structural system engineering,
Experience: minimum 10 years’ experience as structural engineer in structural field in Oil and Gas activities. Extensive experience in structural engineering with relevant experience within the offshore oil and gas production industry,
Experience in offshore facilities or FSO, FPSO is a plus,
Available for technical missions worldwide,
Familiar with Total GS, MOQ standards and relevant codes and standards,
Language: Fluent English.
Computer literate, especially in structural calculation softwares.
Strong leadership skills and good communication skills.
Ability to work on projects in a complex and multicultural environment.
Good analytical skills.
Company : Al Jazeera Street, Bin Mahmoud
Country : Qatar
Description : - An Engineering Consultancy Company.
- Minimum 2-3 years experience.
- Male.
- Salary will be discuss upon interview.
Note : Only shortlisted candidates will be contacted.
Company : Dar Al Sahra Energy services
Country : Qatar
Description : QHSE/QAQC officer/engineer with experience in ISO requirements
dolphinqatar
Country : qatar
Description : PROJECT ENGINEER=12 years’ experience in site project. NOC must require.
FOR APPLICANT INSIDE QATAR
Quality Engineer/ Controller.
Education : Any Degree
Experience : 1-4 years’ Experience as a Quality controller in the field of Inspection Bodies.
The candidate should have relevant knowledge in ISO 1720, ISO 17024 and Integrated management system related with the accreditation experience in DAC/ENAS.
Elevator/Escalator Inspection Engineer
Education : B.E/B.Tech Mechanical/ Electrical Engineering
Experience : 1-3 years’ Experience in the field of Elevator, Escalator and Moving Walk ways.
The engineer should have relevant knowledge and accreditation experience in DAC/ENAS.
Driving license is an added advantage.