Nasser Al Jaber
Category : Engineering
Description : 1. QC Inspector Qty : 02 Nos Experience: 6-8 years’ Experience (Qatar) in Excavation, Pipeline, Pipe Laying, backfilling, Gulley’s, Manhole, Storm water line, Micro Tunnelling, Construction of Chamber, Manhole finishing, reinstatement etc Duration : 3 months Location : Al Thumama 1. QC Inspector - Civil & Infrastructure Qty : 02 Nos Experience: 6-8 years’
Responsibilities include:
• Plans and supervises the major functions of the construction which include the responsibility for the planning and co-ordination of all manpower and equipment, materials supplies, and sub-contracted services, towards the proper completion of the work on schedule with approved drawings, specifications, cost and quality limitations.
• Monitors Sub-contractors at each stage of the work to ensure proper compliance with all technical aspects of the contract through both individual contacts and co-ordination meetings.
• Drafts for the signature of the Project Manager all correspondence to the Client and/or Sub-contractors related to his section of the project.
• A degree in Mechanical Engineering
• 10 + years of working on major international Petrochemical projects
• Expert mechanical engineer able to co-ordinate other disciplines
• Should have an in-depth knowledge of a multi - discipline environment.
• A record of working with international contractors on large scale projects
• Excellent communication skills
Nakilat
Operational Management:
• Undertake ‘front to end’ contracting activities involving all of the required activities such as but not limited to Strategy development; Pre-qualification exercise; preparation and issue of Request for Quotation (RFQ), Request for proposal (RFP), Invitation to Tender (ITT); tender evaluation and clarification, including clarification meetings; negotiation; contract preparation and award; post-award monitoring and administration; and finally performance management process for all assigned contracts / Project related Contractor sourcing categorized as medium to low risk and value.
• Generate and manage all entries in SAP to ensure that all transactions, commitments, and expenditures are duly captured and tracked.
• Advise and support internal stakeholders on appropriate contracting strategies, contract forms, risk vs. incentive and total cost models based on contract arrangement requirements and select the appropriate remuneration methods.
• Select the standard contract model and where applicable prepare special terms and conditions in consultation with the Legal, Finance and other division/departments as may be required to protect the interest of the Company and mitigates risk.
• Interpret the contractual arrangement and obligations and support the contract holders in discussions related to variations, disputes or claims highlighting commercial and contractual issues.
• Prepare the complete sourcing program and timelines for the assigned contract strategies included in Contract Plan / Project Planning based on the priority of each activity and execute accordingly by obtaining respective TOFA approval in accordance with the Company policies and procedures.
Relationship Management:
• Negotiate and administer various types of contractual commitments / project related commitments so that approvals, extensions, modifications and amendments, supplemental funding requests, notifications, close outs, and other actions are handled promptly.
• Liaise with relevant internal stakeholders and subject matter experts in other functions (Finance, Legal, SHEQ, Commercial, Project Team etc.) on matters related to contracts / projects.
Accountabilities - 2
Contracts Management:
• Assist in application, facilitation and implementation of Supplier Performance Management agenda and processes.
• Contribute to the effective management of contracts and deliver outcomes in line with contracts objectives and business requirements.
• Assist in the development and maintenance of contract management information, documentation, procedures, data, and records.
Role Summary/Purpose The Sales Lead is responsible for leading customer relationships across the Oil & Gas portfolio in the assigned region. Be the face for commercial Org. and advocate where needed, coordinate across P&L function. Responsible for orders, commitments and convertible orders for a defined region. Role will manage the customer relationship for their respective region. Essential Responsibilities Lead deal negotiations & closure with customers partnering with commercial operations & product sales leaders. Develop winning strategies, to achieve order closure. This role will partner with the Regional Product Marketing teams to understand the customer environment at the regional level and support the development of sales strategies focused on longer term serviceable segment, expansion and penetration. Support the maintenance of accurate and current project and opportunity information Drive discovery session data to achieve winning solutions for customers Develop long term strategic plans by customer to drive penetration and growth Strategic assessment to maintain accurate plant/asset data and assess each asset in relation to growth opportunity Continuously monitor and drive the development of the opportunity pipeline for regional opportunities Own a coordinated ‘one face to the customer’ across the products and develop & own their Sales plans Build growth plans by Sales Deals, coordinate with other functions in driving detailed Sales reviews periodically Qualifications/Requirements Bachelor's Degree in Engineering, Marketing or Business from an accredited university or college 10+ years of experience in industry-related engineering, sales and/or marketing including minimum 5+ years in a customer-facing role Desired Characteristics Broad and deep understanding of the commercial cycle – including product line/marketing/sales/commercial operations/engineering Strong Sales management skills, including developing relationships, financial & analytical skills & strategic planning capabilities Strong presentation skills at the executive level
Company : Fourth Dimension Group
Country : Qatar
Description : Piping Fabricator required for a well reputed construction firm;
1. Candidates must be in Qatar on visit visa should apply.
2. Overtime and accomodation provided by the company.
Email your resume
DUTIES AND RESPONSIBILITIES:
- Manage and review multi-disciplinary project inputs, critically assess the application of design criteria, check plans and specifications for accuracy of design and completeness.
- Lead external and internal coordination pertinent to sewerage, surface & ground water design and construction.
- Review, comment/recommend acceptance or otherwise of related contractors' submissions.
- Liaise with utilities providers and other internal and external stakeholders.
- Perform actual design duties and other related duties when directed.
Requirements
EXPERIENCE AND QUALIFICATIONS:
- Minimum of 15 years post-graduate and demonstrable experience, of which 7 years as an open cut and micro tunneling, sewerage, surface & ground water networks design engineer in similar or works with coordination with stake holders, government agencies, organization, department etc.
- Bachelor's Degree in Civil Engineering from an accredited University
- Must have a Professional Qualification from a recognized International Institution
- Chartered Engineer in recognized Professional Institution is highly preferred
Job Description We are one of the leading companies engaged in overseas recruitment since last four decades Please visit www.intermanagement.com to know more about us.One of our esteemed clients a top petrochemical and oil amp gas company from Qatar would like to recruit following category of personnel s from INDIA.Position Maintenance Technician Oil amp Gas Job DescriptionTo maintain the technical integrity of the integrated Production systems to ensure that maintenance of production facilities and equipment
Responsible for overseeing the Piping Engineering team and EPC Contractor in delivery of all aspects of Piping design, equipment, technical, and execution definition, including planning for the detailed design, procurement, installation, testing, and commissioning. Ensures technical requirements (e.g. project specifications, datasheets, etc.) developed during FEED fully comply with project deliverables and through effective collaborations and interfaces ensures process design considers the full product life cycle.
Key Job Accountabilities
1. Provides Piping engineering knowledge, design, quality assurance, leadership, and expertise while supervising and administering Piping team design in accordance with project deliverables and approved execution schedule.
2. Directs the preparation and stewardship of Piping engineering scope of work in the EPC contract, advises and recommends design procedures, processes deliverables, and alternative studies, as required, to optimize project cost and schedule.
3. Maintains close liaison with members of Engineering Team and alignment with the Engineering Manager on project engineering needs, objectives, and requirements
4. Accountable for ensuring execution of work is technically aligned and in compliance with Client Operations, Policies, Standards of Business Conduct, and Client Project Management System (CPMS).
Experience / able to manage multiple projects / engineers simultaneously
- Able to coordinate site & head office activities
- Construction Manager experience in Oil & gas environment in GCC is highly desirable
Requirements
- Degree or Diploma in Mechanical Engineering
- Minimum 14 to 16 yrs. of experience as Construction Manager in green & brown activities in Oil & Gas industry with on shore and offshore experience is a must.
About the Company
Catering to the fields like Oil, Gas, Petrochemical and Utilities Industries, both onshore and offshore, DOPET has now grown into one of the largest mechanical construction companies in Qatar.
Powered by a dedicated team of professionals, a strong workforce and sophisticated machineries and equipment, DOPET has successfully carried out EPIC Projects and diverse assignments in areas like Fabrication and Installation of Piping & Structural, Fabrication of Pressure Vessels & Tanks, Electrical, Instrumentation, Valve Overhauling, etc.
Qatar Petroleum (QP) is a state-owned public corporation established byEmiri Decree No. 10 in 1974. It is responsible for all phases of the oiland gas industry in the State of Qatar.The principal activities of QP, its subsidiaries and joint ventures arethe exploration, production, local and international sale of crude oil,natural gas and gas liquids, refined products, synthetic fuels,petrochemicals, fuel additives, fertilizers, liquefied natural gas(LNG), steel and aluminium.QP’s strategy of conducting hydrocarbon exploration and development isthrough Exploration and Production Sharing Agreements (EPSA) andDevelopment and Production Sharing Agreements (DPSA) concluded withmajor international oil and gas companies.The operations and activities of QP and its affiliates are conducted atvarious onshore locations, including Doha, Dukhan and the Mesaieed andRas Laffan Industrial Cities, as well as offshore areas, including HalulIsland, offshore production stations, drilling platforms and the NorthField.Thriving on a spirit of enterprise, each of our joint ventures isunderpinned by transparency, innovation and high standards of qualityand service. At Qatar Petroleum, we are committed to one thing aboveall Excellence.
Stantec Qatar is currently seeking a GIS Engineer for construction supervision project of a Trunk Sewer and Terminal Pumping Station at Doha North. Key Tasks and Duties include: • Provide advanced technical and/or operational expertise on GIS • Review and resolve day to day questions and issues that may arise • Create and manage online tools using spatial data; designs and implement spatial databases in SQL or ArcPy • Delivery of the most appropriate schedules for asset data updates and cleansing • Gather, verify, input and maintain accuracy of spatial data received from a variety of sources such as DNO&M and RMD staff, contractors and suppliers • Create new GIS web mapping applications for use by GIS staff. Interfaces GIS and other software such as EAMS and CRMS to construct easy to use applications for out on Site. • Provide complex and ad-hoc geo-spatial analysis and reports • Interpret as-built drawings, maps, graphs...
Company : Fourth Dimension Group
Country : Qatar
Description : Urgent Hiring:
Only Candidates currently available in Qatar on Visit Visa can apply.
1.Safety Officer
2. Piping/ Rigging Foreman
3. Piping Fabricator
4. Piping Welder (TIG)
5. Structure Welder
6. Rigger
7. Painter
8. Electrician
QATAR TEC WLL
Category : Administration
Description : PROCUREMENT OFFICER - OIL FIELD EXPERIENCE Looking for an experienced Procurement Officer in Qatar Job Details * Evaluates contracts to ensure accurate language and terms are stated investigates and resolves discrepancies * Prepares procurement and auditing reports Receives and tracks professional services qualification statements * Reviews procurement procedures makes recommendations for process improvements * Addresses general procurement issues in absence of Program Manager-Procurement Job Requierements * Bachelor degree * Minimum 5 years ’ experience in the same role * Good communication skill * IT skill
INSTRUMENT TECHNICIAN
This position is a unique opportunity to demonstrate experience with maintenance, installation, trouble shooting and shall report directly to the Foreman/Supervisor.
Your main duties will be:
• Should have experience in DCS, Burner management system, SMART field transmitters, field Instruments such as flow meters, level transmitters, motorized valves, temperature transmitters, solenoid valves, PLC's, SCADA, traffic light systems, vibration monitoring systems, fire & gas system.
• Experience in on-line analyzers, salinity, free chlorine, chlorophyll, and TOC analyzers, familiarity with various types of detectors and sensors used for fire and gas detection shall be an added advantage.
Ideally, you should have Diploma in Instrument & control Engineering.
Minimum of 5-year relevant experience in the oil and gas or petrochemical industry or in a similar facility.
You will have good interpersonal and organizational skills, as well as, an advance level of computer literacy and be proficient in Microsoft Office. You will need excellent communication and presentation skills in both written and verbal English.
Job Description :Looking for an experienced Piping Engineer in Qatar.Job Details: Initiate engineering calculations in conformance with project requirements Prepare work plans for weld testing and track data Prepare work packages for pipe inspections Review drawing supplied by vendors, clients, and other disciplinesJob Requirements: IT skill.Minimum of 5 years of piping/mechanical engineeringGood communication skill.BS Degree in Mechanical Engineering
Qatar Gas
Coordinate and plan all marine, aviation and chemical logistics to ensure uninterrupted operations. Key Job Accountabilities • Support offshore platforms with the delivery of materials, equipment, spare parts, process and pipeline chemicals, Heli fuel and personnel transfers to meet operational objectives. • Coordinate marine vessel loading and unloading operations, prepares shipping & aviation documents including manifests, dangerous goods declarations and cost reports adhering to Company procedures. • Coordinate with Supply department in preparing the scope of work for marine, aviation and chemical contract agreements in accordance with established procedures. • Contribute to the development of policies, procedures and standards governing Company’s aviation, marine operations, movement of equipment, materials, pipeline and process chemicals between offshore and onshore facilities ensuring operational alignment at all times. • Control and coordinates the requirements of Doha Heliport and Ras Laffan Port Liaison concerning helicopters, vessel arrivals, departures, clearances, pilot exemptions, movements of company and third party personnel promoting operational efficiency. • Prepare load lists, supervises loading of supply vessel, compiles manifest shipping documentation and verifies individual/collective cargo weights. Maintains cargo movement statistics for audit and departmental reporting. • Coordinate vessel and helicopter contracts to ensure contractor compliance and remedy non-compliance issues. Ensures that vessel passengers are fully briefed and familiar with the safety and emergency procedures prior to boarding supporting operational safety objective. • Conduct toolbox talks with crew prior to each loading and offloading operation and ensuring all load checks are in compliance with certified offshore lifts. • Coordinate daily scheduling and planning of Company’s marine, air operations, coordinates all safety standby vessel operations, crewing, maintenance days and consumptions are upheld for Operations with regular review of weather forecast. • Compile day-to-day data on fuel, water, consumables and crewing required for audits. Coordinates helicopters operations providing the required number of daily flights between Doha and operation locations and various inter-field locations for operational tracking. Required Qualification • Higher National Diploma (HND) in Operations, Maintenance or similar. • International maritime organization IMO certificate for transportation and handling of dangerous/hazardous goods by sea preferred. • International air transport association IATA certificate for transportation & handling of dangerous /hazardous goods by air preferred. Required Experience • 8 years’ experience in Offshore Logistics (Marine or Helicopter or Chemical). • Varied experience in handling materials, hazardous chemicals, equipment and logistic activities in supporting offshore Oil & Gas operations. • Good adaptability to multinational environment, with wide exposure to various cultures and customs. • Computer literacy. • Proficient in written and spoken English
 Contribute to the mines development and ensure effective cascading of departmental strategy into the assigned production section’s policies and procedures in line with the overall business objectives of the company.
People Management
 Manage the effective achievement of objectives through setting individual objectives, managing performance, developing and motivating staff, provision of formal and informal feedback and appraisal in order to maximize subordinate and the overall performance.
 Assist in the training of production personnel in accordance with the training programs produced by the HR department in order to achieve advances skill levels within the section
Organization Structure
 Support the Production Manager in defining an optimum departmental structure so that resources are optimally utilized and communication can take place in an efficient manner.
Budgets and Plans
 Prepare the budget for the Mines section and monitor financial performance versus the budget so that the business is aware of anticipated costs/revenues, and areas of unsatisfactory performance are identified, rectified promptly and potential performance improvement opportunities are capitalized upon.
Planning of Operations
 Develop and seek approval for the annual and monthly mines development schedule i.e. Blasting days ensuring alignment to the annual production plan and control the implementation of schedule as per set timelines, HSE and quality standards.
 Prepare detailed instructions for necessary work to be carried out by subordinates to ensure timely completion of tasks as per defined operating procedures
Distillation Refinery--------
Opening for an experienced Technical Sales / Supply Chain Engineer in a Oil Distillation Refinery.
Job Responsibilities:
- Key responsibility includes sourcing raw material required for distillation processing and selling of achieved distillates.
- Must posses thorough technical knowledge of products such as Crude Oil, Natural Condensate, Pyrolysis Oil and their distillates such as Naphtha, Kerosene, Diesel, PyGas, etc.
Key Requirements:
- 5+ years experience in the required position, with proven track record details clearly mentioned.
- Thorough knowledge of key players in the local market.
- Driver's license.
We are looking for Rig Scheduler having experience in Offshore/ Onshore. Requirements: -Experience working in Oil & Gas field -Have QID with NOC or Working Visa (transferable) -Can join immediately
Qatar Energy
To be the QP company representative on the drilling or workover rig to ensure that operations are performed in accordance with QP requirements. 1. Direct and control operations at the rig site to ensure they are performed in accordance with QP requirements and without accidents of any kind. In particular ensure that the operations are efficiently and safely performed in compliance with the approved drilling or workover programme, the Drilling Reference Manual (DRM) the Drilling Department “Life Saving Rules” and that all rig site personnel are aware of and adhere to these requirements. 2. Manage HSE at the rig site as the highest priority by demonstrating visible HSE leadership and an unrelenting commitment to a safe working environment. In particular participate in the Drilling Contractors pre-job safety meetings and ensure that the follow-up and close-out of recommendations from HSE incidents on other rigs under contract to QP to ensure safe rig operations at all times. 3. Witness critical operations including but not limited to the flushing of the Mud Gas Separator after each use and the BOP equipment bi-weekly testing (including OEM certification verification) to ensure that critical pressure control equipment is always ready for use and utilized in accordance with the DRM well control procedures. 4. Report all HSE incidents in a timely and accurate manner using the SAP system and lead the initial on-site investigation of all incidents and near misses to identify and document the sequence of events and immediate causes of the incident as quickly as possible. 5. Resolve operational problems as they arise within the framework of the QP policies and standards and ensure that non-routine or unforeseen activities are always meticulously planned and organised to identify potential hazards and to mitigate risks. 6. Review the drilling or workover programme prior to the start of operations to ensure that the equipment and personnel on the rig are capable to perform the work and that there are no errors or anomalies in the programme. 7. Report all daily activities and enter well data and cost information in Open-Wells in a complete manner. Verify that costs entered into Open Wells reflect the current contract costs to ensure that the daily cost estimate is correct and includes all items. 8. Plan and prioritise rig activities and allocate resources to ensure that the programme objectives are achieved in a timely manner and within budget. Provide written instructions to the Drilling Contractor’s representative, Service Personnel and Night Supervisor (when applicable) prior to specific operations and maintain a record of lessons learned and improvement opportunities to facilitate continuous performance improvement. 9. Supervise all QP Contractors involved in the rig operations. Monitor the quality of work performed and prepare service quality assessments. Specifically check that all equipment and chemicals that are delivered to the rig site have the necessary certification documents (CoA) in accordance with QP requirements. 10. Assist with the development of Qatari trainees, ensuring they are properly supervised on the rig site and given meaningful assignments to improve their knowledge. Experience & Skills • At least 15 years’ experience in drilling and workover operations including 8 years as a Drilling Supervisor. • Effective leadership and people management skills in a multi-cultural working environment. • Excellent communication skills in English (demonstrated verbal and written skills) • Commitment and passion for managing HSE. • Energy and enthusiasm for delivering outstanding performance and going above and beyond normal expectations. Education • BSc. degree in an Engineering discipline or equivalent (Petroleum Engineering preferred).
ROOTS ENERGY-----
The competent should have 5 years experience in oil and gas or petrochemical industry or in a similar facility. He shall be familiar with plant isolation procedures, knowledge in working with PLC, SCADA systems, lockout, tagging and permit to work procedures, Diploma/ trade certificate in Mechanical/Electrical discipline
Petroplus is recruiting oil and gas exploration & production company for a Facilities Engineer to be based in the Houston office, with occasional travel to the field required. Responsibilities: • Work in a multi-disciplinary team to scope and design Production Facilities to include Production well pads, Central Facilities and Salt Water Disposal Facilities & Infrastructure. • Troubleshoot and correct issues with existing facilities. • Project Management for construction projects. • Ensure compliance with company and Industry standards. • Work with vendors and suppliers to coordinate delivery of materials and equipment. • Track and monitor costs. • Develop and evaluate proposals for new projects. • Please note at this stage we can only accept applications from individuals
QATAR GAS.
Job Title : Project Engineer –HVAC & Mechanical
Accountabilities
• Preparation and obtaining Engineering Material Approvals (MAR) from Client.
• Preparation of Method Statements,ITP and Procedure for HVAC and Mechanical Construction Activities.
• Served as system owner for whole HVAC scope of the project.
• Played a key role in commissioning all major packages such as process Chillers,RO pressure vessel modules,centrifuge separator,Decanter,Chemical Dosing Pump,DX ACCU unit,Horizontal and Vertical centrifugal pump,Cavity pump,Lamella separator,AHU unit,Aeration Blower,Pressurized Vessels,types of filters,U/G piping flushing.
• Preparation of Job Cards, Construction Worksheets and coordinate with planning to ensure timely execution.
• Organizing and Execution of Construction Activities
• Organizing Manpower, materials and Equipment
• Coordination with Procurement and follow up to ensure timely delivery of materials.
• Coordination with vendors and ensuring the Vendor Deliverables on time.
• Coordination with QA/QC for Inspections (Material & Construction).
• Monitoring preservation activities such as pumps,blowers,vessels,exchangers at both laydown yard and site locations including monthly frequency inspection for all equipment along with Client.
• Supervision and Execution of Construction Works Assignment / Services
• HVAC System : Field Engineering & Construction
• Preservation for Static & Rotating Equipment : Field Engineering & Construction
• Packages Unit : Field Engineering & Commissioning
Nasser Al Jaber
Category : Engineering
Description : 1. QC Inspector Qty : 02 Nos Experience: 6-8 years’ Experience (Qatar) in Excavation, Pipeline, Pipe Laying, backfilling, Gulley’s, Manhole, Storm water line, Micro Tunnelling, Construction of Chamber, Manhole finishing, reinstatement etc Duration : 3 months Location : Al Thumama 1. QC Inspector - Civil & Infrastructure Qty : 02 Nos Experience: 6-8 years’
Responsibilities include:
• Plans and supervises the major functions of the construction which include the responsibility for the planning and co-ordination of all manpower and equipment, materials supplies, and sub-contracted services, towards the proper completion of the work on schedule with approved drawings, specifications, cost and quality limitations.
• Monitors Sub-contractors at each stage of the work to ensure proper compliance with all technical aspects of the contract through both individual contacts and co-ordination meetings.
• Drafts for the signature of the Project Manager all correspondence to the Client and/or Sub-contractors related to his section of the project.
• A degree in Mechanical Engineering
• 10 + years of working on major international Petrochemical projects
• Expert mechanical engineer able to co-ordinate other disciplines
• Should have an in-depth knowledge of a multi - discipline environment.
• A record of working with international contractors on large scale projects
• Excellent communication skills
Nakilat
Operational Management:
• Undertake ‘front to end’ contracting activities involving all of the required activities such as but not limited to Strategy development; Pre-qualification exercise; preparation and issue of Request for Quotation (RFQ), Request for proposal (RFP), Invitation to Tender (ITT); tender evaluation and clarification, including clarification meetings; negotiation; contract preparation and award; post-award monitoring and administration; and finally performance management process for all assigned contracts / Project related Contractor sourcing categorized as medium to low risk and value.
• Generate and manage all entries in SAP to ensure that all transactions, commitments, and expenditures are duly captured and tracked.
• Advise and support internal stakeholders on appropriate contracting strategies, contract forms, risk vs. incentive and total cost models based on contract arrangement requirements and select the appropriate remuneration methods.
• Select the standard contract model and where applicable prepare special terms and conditions in consultation with the Legal, Finance and other division/departments as may be required to protect the interest of the Company and mitigates risk.
• Interpret the contractual arrangement and obligations and support the contract holders in discussions related to variations, disputes or claims highlighting commercial and contractual issues.
• Prepare the complete sourcing program and timelines for the assigned contract strategies included in Contract Plan / Project Planning based on the priority of each activity and execute accordingly by obtaining respective TOFA approval in accordance with the Company policies and procedures.
Relationship Management:
• Negotiate and administer various types of contractual commitments / project related commitments so that approvals, extensions, modifications and amendments, supplemental funding requests, notifications, close outs, and other actions are handled promptly.
• Liaise with relevant internal stakeholders and subject matter experts in other functions (Finance, Legal, SHEQ, Commercial, Project Team etc.) on matters related to contracts / projects.
Accountabilities - 2
Contracts Management:
• Assist in application, facilitation and implementation of Supplier Performance Management agenda and processes.
• Contribute to the effective management of contracts and deliver outcomes in line with contracts objectives and business requirements.
• Assist in the development and maintenance of contract management information, documentation, procedures, data, and records.
Role Summary/Purpose The Sales Lead is responsible for leading customer relationships across the Oil & Gas portfolio in the assigned region. Be the face for commercial Org. and advocate where needed, coordinate across P&L function. Responsible for orders, commitments and convertible orders for a defined region. Role will manage the customer relationship for their respective region. Essential Responsibilities Lead deal negotiations & closure with customers partnering with commercial operations & product sales leaders. Develop winning strategies, to achieve order closure. This role will partner with the Regional Product Marketing teams to understand the customer environment at the regional level and support the development of sales strategies focused on longer term serviceable segment, expansion and penetration. Support the maintenance of accurate and current project and opportunity information Drive discovery session data to achieve winning solutions for customers Develop long term strategic plans by customer to drive penetration and growth Strategic assessment to maintain accurate plant/asset data and assess each asset in relation to growth opportunity Continuously monitor and drive the development of the opportunity pipeline for regional opportunities Own a coordinated ‘one face to the customer’ across the products and develop & own their Sales plans Build growth plans by Sales Deals, coordinate with other functions in driving detailed Sales reviews periodically Qualifications/Requirements Bachelor's Degree in Engineering, Marketing or Business from an accredited university or college 10+ years of experience in industry-related engineering, sales and/or marketing including minimum 5+ years in a customer-facing role Desired Characteristics Broad and deep understanding of the commercial cycle – including product line/marketing/sales/commercial operations/engineering Strong Sales management skills, including developing relationships, financial & analytical skills & strategic planning capabilities Strong presentation skills at the executive level
Company : Fourth Dimension Group
Country : Qatar
Description : Piping Fabricator required for a well reputed construction firm;
1. Candidates must be in Qatar on visit visa should apply.
2. Overtime and accomodation provided by the company.
Email your resume
DUTIES AND RESPONSIBILITIES:
- Manage and review multi-disciplinary project inputs, critically assess the application of design criteria, check plans and specifications for accuracy of design and completeness.
- Lead external and internal coordination pertinent to sewerage, surface & ground water design and construction.
- Review, comment/recommend acceptance or otherwise of related contractors' submissions.
- Liaise with utilities providers and other internal and external stakeholders.
- Perform actual design duties and other related duties when directed.
Requirements
EXPERIENCE AND QUALIFICATIONS:
- Minimum of 15 years post-graduate and demonstrable experience, of which 7 years as an open cut and micro tunneling, sewerage, surface & ground water networks design engineer in similar or works with coordination with stake holders, government agencies, organization, department etc.
- Bachelor's Degree in Civil Engineering from an accredited University
- Must have a Professional Qualification from a recognized International Institution
- Chartered Engineer in recognized Professional Institution is highly preferred
Job Description We are one of the leading companies engaged in overseas recruitment since last four decades Please visit www.intermanagement.com to know more about us.One of our esteemed clients a top petrochemical and oil amp gas company from Qatar would like to recruit following category of personnel s from INDIA.Position Maintenance Technician Oil amp Gas Job DescriptionTo maintain the technical integrity of the integrated Production systems to ensure that maintenance of production facilities and equipment
Responsible for overseeing the Piping Engineering team and EPC Contractor in delivery of all aspects of Piping design, equipment, technical, and execution definition, including planning for the detailed design, procurement, installation, testing, and commissioning. Ensures technical requirements (e.g. project specifications, datasheets, etc.) developed during FEED fully comply with project deliverables and through effective collaborations and interfaces ensures process design considers the full product life cycle.
Key Job Accountabilities
1. Provides Piping engineering knowledge, design, quality assurance, leadership, and expertise while supervising and administering Piping team design in accordance with project deliverables and approved execution schedule.
2. Directs the preparation and stewardship of Piping engineering scope of work in the EPC contract, advises and recommends design procedures, processes deliverables, and alternative studies, as required, to optimize project cost and schedule.
3. Maintains close liaison with members of Engineering Team and alignment with the Engineering Manager on project engineering needs, objectives, and requirements
4. Accountable for ensuring execution of work is technically aligned and in compliance with Client Operations, Policies, Standards of Business Conduct, and Client Project Management System (CPMS).
Experience / able to manage multiple projects / engineers simultaneously
- Able to coordinate site & head office activities
- Construction Manager experience in Oil & gas environment in GCC is highly desirable
Requirements
- Degree or Diploma in Mechanical Engineering
- Minimum 14 to 16 yrs. of experience as Construction Manager in green & brown activities in Oil & Gas industry with on shore and offshore experience is a must.
About the Company
Catering to the fields like Oil, Gas, Petrochemical and Utilities Industries, both onshore and offshore, DOPET has now grown into one of the largest mechanical construction companies in Qatar.
Powered by a dedicated team of professionals, a strong workforce and sophisticated machineries and equipment, DOPET has successfully carried out EPIC Projects and diverse assignments in areas like Fabrication and Installation of Piping & Structural, Fabrication of Pressure Vessels & Tanks, Electrical, Instrumentation, Valve Overhauling, etc.
Qatar Petroleum (QP) is a state-owned public corporation established byEmiri Decree No. 10 in 1974. It is responsible for all phases of the oiland gas industry in the State of Qatar.The principal activities of QP, its subsidiaries and joint ventures arethe exploration, production, local and international sale of crude oil,natural gas and gas liquids, refined products, synthetic fuels,petrochemicals, fuel additives, fertilizers, liquefied natural gas(LNG), steel and aluminium.QP’s strategy of conducting hydrocarbon exploration and development isthrough Exploration and Production Sharing Agreements (EPSA) andDevelopment and Production Sharing Agreements (DPSA) concluded withmajor international oil and gas companies.The operations and activities of QP and its affiliates are conducted atvarious onshore locations, including Doha, Dukhan and the Mesaieed andRas Laffan Industrial Cities, as well as offshore areas, including HalulIsland, offshore production stations, drilling platforms and the NorthField.Thriving on a spirit of enterprise, each of our joint ventures isunderpinned by transparency, innovation and high standards of qualityand service. At Qatar Petroleum, we are committed to one thing aboveall Excellence.
Stantec Qatar is currently seeking a GIS Engineer for construction supervision project of a Trunk Sewer and Terminal Pumping Station at Doha North. Key Tasks and Duties include: • Provide advanced technical and/or operational expertise on GIS • Review and resolve day to day questions and issues that may arise • Create and manage online tools using spatial data; designs and implement spatial databases in SQL or ArcPy • Delivery of the most appropriate schedules for asset data updates and cleansing • Gather, verify, input and maintain accuracy of spatial data received from a variety of sources such as DNO&M and RMD staff, contractors and suppliers • Create new GIS web mapping applications for use by GIS staff. Interfaces GIS and other software such as EAMS and CRMS to construct easy to use applications for out on Site. • Provide complex and ad-hoc geo-spatial analysis and reports • Interpret as-built drawings, maps, graphs...
Company : Fourth Dimension Group
Country : Qatar
Description : Urgent Hiring:
Only Candidates currently available in Qatar on Visit Visa can apply.
1.Safety Officer
2. Piping/ Rigging Foreman
3. Piping Fabricator
4. Piping Welder (TIG)
5. Structure Welder
6. Rigger
7. Painter
8. Electrician
QATAR TEC WLL
Category : Administration
Description : PROCUREMENT OFFICER - OIL FIELD EXPERIENCE Looking for an experienced Procurement Officer in Qatar Job Details * Evaluates contracts to ensure accurate language and terms are stated investigates and resolves discrepancies * Prepares procurement and auditing reports Receives and tracks professional services qualification statements * Reviews procurement procedures makes recommendations for process improvements * Addresses general procurement issues in absence of Program Manager-Procurement Job Requierements * Bachelor degree * Minimum 5 years ’ experience in the same role * Good communication skill * IT skill
INSTRUMENT TECHNICIAN
This position is a unique opportunity to demonstrate experience with maintenance, installation, trouble shooting and shall report directly to the Foreman/Supervisor.
Your main duties will be:
• Should have experience in DCS, Burner management system, SMART field transmitters, field Instruments such as flow meters, level transmitters, motorized valves, temperature transmitters, solenoid valves, PLC's, SCADA, traffic light systems, vibration monitoring systems, fire & gas system.
• Experience in on-line analyzers, salinity, free chlorine, chlorophyll, and TOC analyzers, familiarity with various types of detectors and sensors used for fire and gas detection shall be an added advantage.
Ideally, you should have Diploma in Instrument & control Engineering.
Minimum of 5-year relevant experience in the oil and gas or petrochemical industry or in a similar facility.
You will have good interpersonal and organizational skills, as well as, an advance level of computer literacy and be proficient in Microsoft Office. You will need excellent communication and presentation skills in both written and verbal English.
Job Description :Looking for an experienced Piping Engineer in Qatar.Job Details: Initiate engineering calculations in conformance with project requirements Prepare work plans for weld testing and track data Prepare work packages for pipe inspections Review drawing supplied by vendors, clients, and other disciplinesJob Requirements: IT skill.Minimum of 5 years of piping/mechanical engineeringGood communication skill.BS Degree in Mechanical Engineering
Qatar Gas
Coordinate and plan all marine, aviation and chemical logistics to ensure uninterrupted operations. Key Job Accountabilities • Support offshore platforms with the delivery of materials, equipment, spare parts, process and pipeline chemicals, Heli fuel and personnel transfers to meet operational objectives. • Coordinate marine vessel loading and unloading operations, prepares shipping & aviation documents including manifests, dangerous goods declarations and cost reports adhering to Company procedures. • Coordinate with Supply department in preparing the scope of work for marine, aviation and chemical contract agreements in accordance with established procedures. • Contribute to the development of policies, procedures and standards governing Company’s aviation, marine operations, movement of equipment, materials, pipeline and process chemicals between offshore and onshore facilities ensuring operational alignment at all times. • Control and coordinates the requirements of Doha Heliport and Ras Laffan Port Liaison concerning helicopters, vessel arrivals, departures, clearances, pilot exemptions, movements of company and third party personnel promoting operational efficiency. • Prepare load lists, supervises loading of supply vessel, compiles manifest shipping documentation and verifies individual/collective cargo weights. Maintains cargo movement statistics for audit and departmental reporting. • Coordinate vessel and helicopter contracts to ensure contractor compliance and remedy non-compliance issues. Ensures that vessel passengers are fully briefed and familiar with the safety and emergency procedures prior to boarding supporting operational safety objective. • Conduct toolbox talks with crew prior to each loading and offloading operation and ensuring all load checks are in compliance with certified offshore lifts. • Coordinate daily scheduling and planning of Company’s marine, air operations, coordinates all safety standby vessel operations, crewing, maintenance days and consumptions are upheld for Operations with regular review of weather forecast. • Compile day-to-day data on fuel, water, consumables and crewing required for audits. Coordinates helicopters operations providing the required number of daily flights between Doha and operation locations and various inter-field locations for operational tracking. Required Qualification • Higher National Diploma (HND) in Operations, Maintenance or similar. • International maritime organization IMO certificate for transportation and handling of dangerous/hazardous goods by sea preferred. • International air transport association IATA certificate for transportation & handling of dangerous /hazardous goods by air preferred. Required Experience • 8 years’ experience in Offshore Logistics (Marine or Helicopter or Chemical). • Varied experience in handling materials, hazardous chemicals, equipment and logistic activities in supporting offshore Oil & Gas operations. • Good adaptability to multinational environment, with wide exposure to various cultures and customs. • Computer literacy. • Proficient in written and spoken English
 Contribute to the mines development and ensure effective cascading of departmental strategy into the assigned production section’s policies and procedures in line with the overall business objectives of the company.
People Management
 Manage the effective achievement of objectives through setting individual objectives, managing performance, developing and motivating staff, provision of formal and informal feedback and appraisal in order to maximize subordinate and the overall performance.
 Assist in the training of production personnel in accordance with the training programs produced by the HR department in order to achieve advances skill levels within the section
Organization Structure
 Support the Production Manager in defining an optimum departmental structure so that resources are optimally utilized and communication can take place in an efficient manner.
Budgets and Plans
 Prepare the budget for the Mines section and monitor financial performance versus the budget so that the business is aware of anticipated costs/revenues, and areas of unsatisfactory performance are identified, rectified promptly and potential performance improvement opportunities are capitalized upon.
Planning of Operations
 Develop and seek approval for the annual and monthly mines development schedule i.e. Blasting days ensuring alignment to the annual production plan and control the implementation of schedule as per set timelines, HSE and quality standards.
 Prepare detailed instructions for necessary work to be carried out by subordinates to ensure timely completion of tasks as per defined operating procedures
Distillation Refinery--------
Opening for an experienced Technical Sales / Supply Chain Engineer in a Oil Distillation Refinery.
Job Responsibilities:
- Key responsibility includes sourcing raw material required for distillation processing and selling of achieved distillates.
- Must posses thorough technical knowledge of products such as Crude Oil, Natural Condensate, Pyrolysis Oil and their distillates such as Naphtha, Kerosene, Diesel, PyGas, etc.
Key Requirements:
- 5+ years experience in the required position, with proven track record details clearly mentioned.
- Thorough knowledge of key players in the local market.
- Driver's license.
We are looking for Rig Scheduler having experience in Offshore/ Onshore. Requirements: -Experience working in Oil & Gas field -Have QID with NOC or Working Visa (transferable) -Can join immediately
Qatar Energy
To be the QP company representative on the drilling or workover rig to ensure that operations are performed in accordance with QP requirements. 1. Direct and control operations at the rig site to ensure they are performed in accordance with QP requirements and without accidents of any kind. In particular ensure that the operations are efficiently and safely performed in compliance with the approved drilling or workover programme, the Drilling Reference Manual (DRM) the Drilling Department “Life Saving Rules” and that all rig site personnel are aware of and adhere to these requirements. 2. Manage HSE at the rig site as the highest priority by demonstrating visible HSE leadership and an unrelenting commitment to a safe working environment. In particular participate in the Drilling Contractors pre-job safety meetings and ensure that the follow-up and close-out of recommendations from HSE incidents on other rigs under contract to QP to ensure safe rig operations at all times. 3. Witness critical operations including but not limited to the flushing of the Mud Gas Separator after each use and the BOP equipment bi-weekly testing (including OEM certification verification) to ensure that critical pressure control equipment is always ready for use and utilized in accordance with the DRM well control procedures. 4. Report all HSE incidents in a timely and accurate manner using the SAP system and lead the initial on-site investigation of all incidents and near misses to identify and document the sequence of events and immediate causes of the incident as quickly as possible. 5. Resolve operational problems as they arise within the framework of the QP policies and standards and ensure that non-routine or unforeseen activities are always meticulously planned and organised to identify potential hazards and to mitigate risks. 6. Review the drilling or workover programme prior to the start of operations to ensure that the equipment and personnel on the rig are capable to perform the work and that there are no errors or anomalies in the programme. 7. Report all daily activities and enter well data and cost information in Open-Wells in a complete manner. Verify that costs entered into Open Wells reflect the current contract costs to ensure that the daily cost estimate is correct and includes all items. 8. Plan and prioritise rig activities and allocate resources to ensure that the programme objectives are achieved in a timely manner and within budget. Provide written instructions to the Drilling Contractor’s representative, Service Personnel and Night Supervisor (when applicable) prior to specific operations and maintain a record of lessons learned and improvement opportunities to facilitate continuous performance improvement. 9. Supervise all QP Contractors involved in the rig operations. Monitor the quality of work performed and prepare service quality assessments. Specifically check that all equipment and chemicals that are delivered to the rig site have the necessary certification documents (CoA) in accordance with QP requirements. 10. Assist with the development of Qatari trainees, ensuring they are properly supervised on the rig site and given meaningful assignments to improve their knowledge. Experience & Skills • At least 15 years’ experience in drilling and workover operations including 8 years as a Drilling Supervisor. • Effective leadership and people management skills in a multi-cultural working environment. • Excellent communication skills in English (demonstrated verbal and written skills) • Commitment and passion for managing HSE. • Energy and enthusiasm for delivering outstanding performance and going above and beyond normal expectations. Education • BSc. degree in an Engineering discipline or equivalent (Petroleum Engineering preferred).
ROOTS ENERGY-----
The competent should have 5 years experience in oil and gas or petrochemical industry or in a similar facility. He shall be familiar with plant isolation procedures, knowledge in working with PLC, SCADA systems, lockout, tagging and permit to work procedures, Diploma/ trade certificate in Mechanical/Electrical discipline
Petroplus is recruiting oil and gas exploration & production company for a Facilities Engineer to be based in the Houston office, with occasional travel to the field required. Responsibilities: • Work in a multi-disciplinary team to scope and design Production Facilities to include Production well pads, Central Facilities and Salt Water Disposal Facilities & Infrastructure. • Troubleshoot and correct issues with existing facilities. • Project Management for construction projects. • Ensure compliance with company and Industry standards. • Work with vendors and suppliers to coordinate delivery of materials and equipment. • Track and monitor costs. • Develop and evaluate proposals for new projects. • Please note at this stage we can only accept applications from individuals
QATAR GAS.
Job Title : Project Engineer –HVAC & Mechanical
Accountabilities
• Preparation and obtaining Engineering Material Approvals (MAR) from Client.
• Preparation of Method Statements,ITP and Procedure for HVAC and Mechanical Construction Activities.
• Served as system owner for whole HVAC scope of the project.
• Played a key role in commissioning all major packages such as process Chillers,RO pressure vessel modules,centrifuge separator,Decanter,Chemical Dosing Pump,DX ACCU unit,Horizontal and Vertical centrifugal pump,Cavity pump,Lamella separator,AHU unit,Aeration Blower,Pressurized Vessels,types of filters,U/G piping flushing.
• Preparation of Job Cards, Construction Worksheets and coordinate with planning to ensure timely execution.
• Organizing and Execution of Construction Activities
• Organizing Manpower, materials and Equipment
• Coordination with Procurement and follow up to ensure timely delivery of materials.
• Coordination with vendors and ensuring the Vendor Deliverables on time.
• Coordination with QA/QC for Inspections (Material & Construction).
• Monitoring preservation activities such as pumps,blowers,vessels,exchangers at both laydown yard and site locations including monthly frequency inspection for all equipment along with Client.
• Supervision and Execution of Construction Works Assignment / Services
• HVAC System : Field Engineering & Construction
• Preservation for Static & Rotating Equipment : Field Engineering & Construction
• Packages Unit : Field Engineering & Commissioning