The engineer will perform a broad cross section of complex technical and administrative activities requiring extensive experience and specialization in Quality Control and Quality Assurance inspection of construction work. Job Duties: • Analyzes applicable codes, standards and project contract documents and monitors construction activities to ensure compliance. • Monitors and/or evaluates electrical tests and inspections such as ground-fault, ground resistance, insulation resistance, polarity, continuity, capacity, load and other electrical field tests as required. Able to interpret single-line and/or schematic electrical drawings as well as plans and specifications. • Field checks installation and location of electrical equipment, electrical duct, conduit, cable, panels and other components of the electrical system being installed. Assures compliance with approved submittals. • Monitors all electrical installations to assure circuitry, phasing equipment and grounding adhere to construction documents and National Electric Code requirements. • Provides general inspection on all construction and subcontractor work to assure a safe and workmanlike operation. • Verifies equipment settings, alignment, testing and energization requirements. • Evaluates and monitors adequacy of Contractor Quality Control (CQC) programs. Minimum Requirements • Minimum 8 years of work experience on construction and supervision projects. • Candidate must be MMUP registered. Preferred Qualifications • Diploma / Bachelor Degree in relevant Engineering field (i.e. Civil, Mechanical, Electrical, Structural etc.)
• Execute mechanical, electrical & plumbing activities according to drawings and taking approvals from consultant and client time to time.
• In-charge of material submittals and take off for materials in the site.
• Oversee and monitor the installation and handling of HVAC System, Fire Fighting System, Plumbing & Drainage System.
• Develop inspection procedures and implement throughout the construction stages. Ensure Implementation of Quality standards and Control.
• Coordinate with electrical and civil contractors for better work results at worksite
• Carried out inspections related to material and mechanical activities completed on site.MEP Emgieen
- Should have at least 5 years of experience in big infrastructure project across the middle east region
- Should have diploma/degree in Mechanical or Electrical Engineering
- Fluent in English Language
- Should be able to relocate in Qatar immediately
Country : Qatar
Description : Project Manager/Industrial ELV Engineer
Experience: 10-15 Years’ experience in industrial ELV Engineering, Networks, and Project Management including contract administrations.
Previously worked on integrated systems (Electrical and Logical) with medium/large scale projects.
Quality Engineer/ Controller.
Education : Any Degree
Experience : 1-4 years’ Experience as a Quality controller in the field of Inspection Bodies.
The candidate should have relevant knowledge in ISO 1720, ISO 17024 and Integrated management system related with the accreditation experience in DAC/ENAS.
Ae.centiel
Country : Qatar
Description : We are looking for an experienced Sales Engineer to join our team in Qatar.
Requirements:
• Degree in Electrical Engineering
• 5 to 7 years of UAE experience in UPS systems and related products
• Candidates having valid UAE driving license preferred
Suitable candidates can send their cv
As part of the ongoing project expansion,GRA-Gulf Coast Construction,LLC, is accepting application from qualified and experience engineers in different position: Project Engineers (For Water Division) Cost Control Engineers,Safety Officers,Project Engineer,Civil/Mechanical Engineer,Accountant,Sales Manager,Project Manager,Truck Drivers,Electrical,Structural Engineer,Quantity Surveyors, Tax Free.
Applicant should urgently forward your CV
Company : Focus Design Partners
Country : Qatar
Description : For applicant currently living in Qatar a MMUP License, NOC & Transferable is REQUIRED.
Mechanical Engineer shall provide leadership and comprehensive mechanical engineering support in planning developing and supervising mechanical installations, operations and building equipment. Capable of reviewing contractor’s submittals & proposed materials. Has full understanding of firefighting & building safety codes: i.e NFPA 101, Ashrea.. etc
Job description / Role
• Developing sustainable building services designs for commercial, educational, health care facilities, residential, tall tower, Infrastructure and mixed-use developments projects.
• Knowledge of ventilation and air conditioning systems and a successful track record of delivering detailed designs to the highest international standards.
• Performing engineering evaluations, Design reports, conceptual and final design.
• Have the basic knowledge of other mechanical systems, including but not limited to Firefighting, plumbing and gas distribution systems.
• Preparation of mechanical engineering calculation in support of systems’ design.
• Evaluating and analyzing statistical data, customer design proposals, specifications and manuals to determine feasibility of design or application.
• Working knowledge of various building services design codes such as British Standards, ASHRAE, NFPA, UPC,IPC, IMC and other International design codes. Knowledge in local Codes in Qatar QCS and QCDD has an added value.
• Interfacing, coordinating and working with the Arch, Structural and MEP design team in a professional manner to achieve project goals.
Requirements
• Bachelor’s Degree in Mechanical Engineering.
• 5 to 7 years of experience, with Major Exp into HVAC Design.
• Excellent communication and time management skills.
• Experience using computer HVAC design tools, AutoCAD, Revit MEP is essential.
A leading international engineering practice, offers service in architecture, interior design, master planning, landscape, urban design and building consultancy within Asia & Middle East currently require a Senior Civil Engineer to join their organisation.
Qualification:
• Minimum Bachelor’s Degree in Civil Engineering or relevant Subject
• Education qualification obtained from North America, West Europe, Australia
• Holder of Chartered Membership in relevant discipline (e.g. Engineering) would be an advantage
• MBA and/or secondary relevant degree would be advantage
• Holder of current/valid Driving License
Experience:
• 15 years of cumulative experience in a relevant field, minimum 5 years in treated/waste water including the managing the contractors and leading the team
• Experience of working in a multidisciplinary organization preferably in the Middle East
• Knowledge and experience in Contract Management. Ability to deliver and support change
• Knowledge of Quality, Health and Safety, and Environment policies, procedures and regulations.
• Competent in Microsoft Office Packages
• Ability to influence and engage stakeholders and staff at all levels within the Organization
• Ability to communicate verbally and in writing in English is mandatory.
• Ability to communicate verbally and in writing in Arabic is preferred
Garden House Center
Category : Engineering
Description : A reputed Landscaping Company in Qatar is urgently looking to hire for the following positions: 1. IRRIGATION ENGINEER: Bachelor of Irrigation Engineering. 5 years of relevant experience with minimum 3 years in GCC. Experience in Construction and Maintenance of Landscaping projects. 2. IRRIGATION FOREMAN: Diploma/Certificate in Irrigation. Minimum 5 years of relevant experience with 3 years in GCC. Experience in Construction and Maintenance of Landscaping projects. Note: All the above requirements are urgent. Only for candidates who are locally available in Qatar with Transferable Visa. Interested people can share their profile
AECOM is seeking a Mechanical Construction Engineer for an anticipated position supporting a construction effort in the country of Qatar. The mechanical engineer will research and analyze data such as customer design proposal, specifications, and manuals to determine feasibility of design or application. Provide mechanical design service including determination of HVAC loads, equipment selection, duct sizing and routing, interior plumbing design, exterior plumbing design, and fire protection systems. The work location for this position in Qatar. • Research and analyze data such as customer design proposal, specifications, and manuals to determine feasibility of design or application. • Design products or systems in support of facilities' infrastructure, research, or maintenance requirements. • Coordinate, troubleshoot, and approve installation activities as inspection services to ensure products and systems conform to engineering design and specifications. • Establish mechanical engineering design criteria and provide guidance and evaluation for facility projects; determine HVAC loads, complete equipment selection, perform duct sizing and routing, design interior/exterior plumbing and fire protection systems. • Able to serve as the alternate project lead in the absence of the site manager. • Perform all other position related duties as assigned or requested.
AklAziz----
Job Description : Urgently looking for an experienced Civil Engineer in Qatar. Job Details: • Provide technical direction and guidance to team members such as in-house drafters. • Develop practical solutions for construction and design-related issues. • Interact with external consulting engineers and customers. • Coordination of roadway design project plans with associated utilities. • Design municipal, transportation, water resources, public/private site development, and/or airport projects using CAD principles. • Understand and interpret design and construction specifications. Job Requirements: • Gradaute Holder. • Minimum 3 years experience is required. • Valid Qatar Driving License. • Good Communication & Interpersonal Skills. • IT Skills.
ompany : Lotus Trading & Contracting Co.
Country : Qatar
Description : CIVIL QA-QC ENGINEERS/INSPECTORS - Applicants must be a graduate of Bachelor's Degree in Civil Engineering, with 02-03 years work experience in handling QA/QC works for an infrastructure projects particularly roadworks and drainage systems, a resident of Doha and with transferable visa.
Company : Blueprint
Country : Qatar
Description : MEP Design Manager
Responsibilities:
• Manage all aspects with client, consultant, sub-contractors & internal engineering and design departments.
• Develop, manage, monitor and lead the entire MEP Design Process for the Project
• Manage a team of multinational staff of differing levels and ability
• Develop a Bill of Quantities (BOQ) based on standard forms
• Develop a procurement and work schedule for the projects
• Coordinate the RCP with the ID team
• Prepare, understand and evaluate mechanical and electrical detailed drawings for small scale projects (shops, restaurants, offices) and to ensure the connectivity with the design.
• Coordinates the mechanical, electrical, and plumbing elements of all projects and resolve all potential interference and conflicts.
• Provides interpretation of plan, detail sheets, and specifications for M/E
• Participates in evaluating contractors' proposals on tenders.
• Participates in project negotiations with contractors/ bidders.
• Visits sites on hand to ensure proper execution.
• Compose and document all project electromechanical related paper work
Requirements:
· Excellent knowledge of English
· Excellent Knowledge of HVAC Design
· Excellent Knowledge in Computer Applications such as AutoCad, Word, Excel, Outlook
Country : Qatar
Description : Mechanical Engineer
Consultancy Company looking to hire a Mechanical Engineer.
Requirements/Qualifications:
• UPDA certified Grade A or B with 10 years’ Experience or more is a must.
• Familiar of FF, ventilation and HVAC. Plumbing.
• Designing.
• Site supervision & execution.
• Preferable experience in Consultancy.
• Salary Between Qar. 8,000 To Qar. 12,000
• Send your UPDA License along with your resume
Country : Qatar
Description : We have a job opening for CIVIL QA/QC MANAGER. Applicants must fulfill the following qualifications :
Educational Qualification: Bachelor’s Degree in Civil Engineering with MMUP/UPDA Grade A License/Registration.
Number of years of experience: Minimum of 05- 07 years of experience in the same role of managing quality assurance and inspection of large projects of a civil contracting organization.
Specializations required: Certified Quality Manager/ Certified Quality Assurance Manager, Lead Auditor Certification, IMS (ISO 9001: 2015, OHSAS 45001: 2018, 14001: 2015),
Area of experience required:
1. Knowledge of using & implementation of the IMS system.
2. Experience with managing field engineering, inspection, and NDE related to all QA/QC functions.
3. Experience in project planning, execution (construction realities), management, and communication with all engineering groups.
4. Experience in shutdown planning and execution.
5. Development and management of non- conformance, deficiencies, and reporting programs, including root cause analysis.
Competency requirements:
1. High level of technical expertise and knowledge in quality control and quality assurance methodologies, testing, building products & specifications, and industrial quality standards.
2. Good knowledge and hands- on experience in External & Internal Quality Audit Programme.
3. Executes high level of organization and time management skills through an organized ability to create multiple timelines, documentation and reports.
4. Flexibility – works well under pressure and adapts quickly to different situations and demands.
5. Possesses excellent communication skills through effective communication with all levels of project personnel (Client Representatives, Consultants, Subcontractors, Site Staff and Workers).
6. Must be proactive and possesses strong physical ability and health to carry out the daily strenuous activities as the job requires travelling from different project sites, frequently changing work schedules and unexpected project requirements.
Umalbawaki
Country : Qatar
Description : Civil Supervisor
Salary 3000
Food room transport free
Also have ot
Easy To Change Sponsorship. More Position And Opportunities.
*Solve Noc Issue.
*Solve ID Issue.
* Solve Visa Change.
Urgent vacancy requirements.
planet earth qatar
Country : Qatar
Description : Required Site Engineer for Water Proofing Company in Qatar.
Candidate should have Valid Qatar Driving License & Transferable Visa
1 - 2 years Experience in Civil Construction/Waterproofing field
QR10-14k + flights & medical pr month
The Company
Digby Morris' client is a highly respected employer in the Qatari market. A privately owned main contractor which employs about 5000 employees entirely in Doha, the company has been operating for about 30 years and has a turnover in the region of $600m per annum. It is largely involved in traditional D&B construction projects including hotels and high rise commercial projects.
Owing to a pending retirement the company has an immediate requirement for an ELV Project Electrical Engineer to be based in their head office in Doha.
The Role
Employee shall be responsible for the complete delivery of End-to-End Projects.
The Key Roles shall be:
1.Preparation and coordination of all project documentation.
2.Coordinating the efforts of team members and third-party contractors or consultants to deliver projects according to plan.
3.Define the project’s objectives and oversee quality control throughout its life cycle.
4.Project Execution
5.Projects Finalization within time and budget
6.Responsible for Planning & Coordination of ELV works which includes Preparing & Monitoring of Construction
7.Develop the detailed schedules for all ELV activities; Design Procurement, Installation and Testing and Commissioning of the following disciplines:
8.Insure the update and forecast ELV activities
9.Insure the follow-up of the schedule
10.Report to the project Manager
11.Coordination with procurement team for timely delivery of materials at site
12.Monitoring execution and managing overall ELV works carrying out on site observation & coordination in interpreting drawing at site
13.In-house interfacing with other departments related to drawing & ability of front Preparation of sub-contractor billing, progress reports, project documentation, procurement details of materials at site
The Ideal Candidate:
• Diploma in Electronic Engineering or relevant discipline, university degree holder will be an advantage but not mandatory.
• At least 12 years relevant working experience in Security or ELV System installation for infrastructure.
• Be self-motivated and good communication skills with different levels of trades at site.
Assist in review of design plant layouts using AutoCAD and Plant 3D which could include items such as equipment, conveyors, machinery, piping, packaging lines, and raw material storage.
Assist in review of connection and interface between different plant or units from different vendors.
Follow all company, client and project specification design and drafting standards.
Issuing request for quotation based on project specifications, for mechanical items including pumps, air compressors, bagging machines, conveyors.
Review vendors technical offers for different mechanical equipment.
Issuing shop of drawings for different units such as pumping station, air composers rooms, machinery house, using 3D and 2D applications.
Apply basic formulas and compute necessary calculations regarding layout designs.
Work collaboratively utilizing design systems to produce mechanical shop drawings.
Execute design changes and project drawing revisions.
Skills and Experience:
• Bachelor engineering degree in Civil or Structural Engineering. Master Degree is an added advantage.
• Minimum 10 years of experience in design environment with design of Steel and Concrete building and Precast design experience.
• Well versed in American and Euro codes, standards, practices and local authority’s requirements.
• Hands on experience with FEM software such as ETABS, SAFE, SAP 2000, Staad Pro, Prokon etc.
• Ability to work independently and as a part of team.
Responsibilities:
• Perform analysis, design and documentation of simple as well as complex structures.
• Conduct review of structural design and drawings of buildings includes precast structures.
• Preparation, issue of design and review reports for authorities’ submission.
• Co-ordinate with other disciplines such as Architectural and MEP and infrastructure.
Supports the SPM Engineering and Interfaces Manager in providing direction and management of the Electrical design requirements for the Lusail project. • Interfaces with the Consultant’s Design Team to monitor schedule and budget performance. Reviews, coordinates and monitors the works of all Electrical designers to provide guidance regarding the vision of Lusail and project requirements and specifications. • A key function is to manage the responses to design RFIs, review/comment on Change Orders, and provide overall supervision for the design direct reports, while managing schedule and budget control. • Responsible for management of the delivery of the design of the various Electrical projects by verifying consistency in the design with respect to adherence to the design criteria and required standards. • Participates in the VE and manage all VE studies, constructability and other workshops; and drives the on-schedule submittal of the Electrical design deliverables. • Keeps Project Management Team constantly informed as to changes made in the field to ensure timely processing of contract change orders. • Prepares weekly work load reports, monitors the progress of work accomplished and reports to the higher management and the client. • Serves as primary interface with the design consultants in performing design reviews or addressing construction-related issues related to the electrical systems. • Regularly interacts with the client to share and understand the on-going design and construction issues • Maintains overall knowledge of drawings, specifications, general contracts and time schedules related to the various Electrical works. • Ensures all Electrical design works are comprehensive and discussed with the various engineers for the best implementation and installation of services in coordination with other parties and contractor. • May participate in negotiations with regulatory agencies in public meetings to support the client in matters related to the Electrical works. • Provides necessary technical support and design review / audit services to project management team ensuring the correctness and quality of implementation of requirements. • Understands all related codes and their application to the project; and overseas/manages the interface with local agencies to coordinate design standards usage and monthly approvals’ process
GRC Masters
Category : Engineering
Description : The Quality Engineer's responsibilities include designing quality standards, inspecting materials, equipment, processes, and products, developing quality control systems, and determining corrective actions. You will also work with managers and supervisors to implement quality measures. A successful Quality Engineer should have excellent troubleshooting skills and be able to ensure that processes and products consistently meet established quality standards. Quality Engineer Responsibilities: • Developing and implementing quality standards. • Developing and implementing quality control systems. • Monitoring and analyzing quality performance. • Inspecting and testing materials, equipment, processes, and products to ensure quality specifications are met. • Collaborating with operations managers to develop and implement controls and improvements. • Ensuring that workflows, processes, and products comply with safety regulations. • Investigating and troubleshooting product or production issues. • Developing corrective actions, solutions, and improvements. • Reviewing codes, specifications, and processes. Quality Engineer Requirements: • Degree in quality, industrial, or mechanical engineering. • ASQ certification preferred. • 2+ years of experience in quality engineering, quality assurance, or a similar role. • Experience coding and using QA software tools and processes. • Strong communication and interpersonal skills. • Strong analytical and problem-solving skills. • Excellent project management skills. Note : salary negotiable
A Bachelor's Degree of Engineering or university with major coursework in other closely related fields.
Qualifications :
Minimum of 4 years’ experience in a Planning role
Skills Required :
Experience of working in a pressurized environment, delivering to tight deadlines and providing input as high at Senior Management level.
A high level of PC literacy is required, with particular strengths in Microsoft Office applications
Brief Job Description:
Prepare / Reviewing the projects baseline schedule with relative Section / Department.
Update / monitoring the progress of the project (Highlighting projects problems and delay with mitigation plans if any).
Analyzing Project Status and reporting with the appropriate suggestions including Risks involved at each stage of the project.
Coordination with the concerned project manager / engineer for the issues related to Planning & Scheduling in addition to the Design Consultants.
Prepare / Reviewing the Projects Dashboards using the P6 Web & Update on weekly & monthly for the Sr. Management Review for the committed projects.
Issuing the Weekly / Monthly Reports or any other eventually reports requested by concerned department.
Attending Progress Meetings and highlighting the critical issues related to Planning and Scheduling.
Coordination with Projects Document Controllers to ensure that Document Controls System is properly implemented using the Electronic System such as Primavera Contract Management (PCM) , ERP etc.. and issue the weekly / monthly reports for the Open Submittals and Correspondence for follow-ups by projects concerned team.
Assisting Planning & Cost Control Section for the Claims, Variations & Addendum Evaluation and any other tasks associated with Planning & Cost Control Section.
Assisting in finalizing the KPI’s of ongoing projects with concerned engineer / section / dept.
Preparing tender and contract documents, including bills of quantities.
Undertaking cost analysis for repair and maintenance project work.
Assisting in establishing a client's requirements and undertaking feasibility studies.
Performing risk, value management and cost control.
Identifying, analysing and developing response to commercial risks.
Edgewater Technical Services WLL
Category : Engineering
Description : • Operate all valves as and when required. • Write defect notification to supervisor for all defects in transmission and distribution mains. • Isolate the valves during any incidents of pipe break or shut down of main line for any interconnection or maintenance work. • Resume water supply after repair work • Checks the area pressure/monitoring after the repair work • Daily valve operations for areas which are supplied less than 24 hrs. Water supply. • Dewater of all valve pits including reservoir chambers. • Routine air releasing from fire hydrant for all distribution mains. • Submit to supervisors daily and monthly reports. • Supervise the valve helpers • Other jobs assigned by the supervisor
The mechanical engineer will research and analyze data such as customer design proposal, specifications, and manuals to determine feasibility of design or application. Provide mechanical design service including determination of HVAC loads, equipment selection, duct sizing and routing, interior plumbing design, exterior plumbing design, and fire protection systems. The work location for this position is on the Al Udeid Air Base (AUAB) in Qatar. • Research and analyze data such as customer design proposal, specifications, and manuals to determine feasibility of design or application. • Design products or systems in support of facilities' infrastructure, research, or maintenance requirements. • Coordinate, troubleshoot, and approve installation activities as inspection services to ensure products and systems conform to engineering design and specifications. • Establish mechanical engineering design criteria and provide guidance and evaluation for facility projects; determine HVAC loads, complete equipment selection, perform duct sizing and routing, design interior/exterior plumbing and fire protection systems. • Able to serve as the alternate project lead in the absence of the site manager. • Perform all other position related duties as assigned or requested. • Due to nature of the work, candidate must be a US Citizen. Additional Information: • Qualified applicants who are offered a position must pass a pre-employment substance abuse test and be capable and willing to submit and pass random fitness for duty screening particularly for drugs and alcohol. IND-MR Minimum Requirements • Bachelor's Degree in Mechanical Engineering, and four plus (4) years of design experience and be capable of determination of HVAC loads, equipment selection, duct sizing and routing, interior plumbing plans, exterior plumbing plans, and fire protection systems. • Proficient in AutoCAD 2012 or later. • Must have experience in AutoCAD Civil 3D GIS systems. • Must possess and maintain a Secret Security Clearance. • Due to the nature of the work, candidate must be US Citizen Preferred Qualifications
Diploma in Mechanical Engineering or B Tech Mechanical
Minimum 5 yrs relevant work experience in steel fabrication shop
Understanding of Engineering Drawings/ Blueprints, symbols and standards
Perform accurate estimation in fabrication/ erection of steel structures to enable the Division to provide timey quotations to its customers.
Conduct estimations for all received customer inquiries in order to prepare quotations
Carry out identification and quantifying of materials required in production/erection of steel structures
Provide additional support for interpretation and clarification of Customer BOQ and Drawings.
Gulf work experience Preferred
Only male candidates need to apply.
Salary - QR 3,000 TO QR 4,500 +accommodation + Transport
Carrier is a global provider of sustainable building and refrigeration solutions. Ever since the establishment of Carrier Solutions as a joint venture between Ensrv and Carrier Corporation in 1999, we have always kept our customers at the center of every product & service we offer and act swiftly to exceed their expectations. Our efforts to provide industry-leading solutions to improve home comfort, productivity and efficiency have never looked better as we continue to build best-in-class products and services to our innovative controls and building automation systems. OVERALL JOB PURPOSE: To achieve the booking and sales target for Service and Aftermarket Business Unit products (Service Agreements (Maintenance contracts), Service Repairs and Service modernization (retrofit/replacement)) with specified gross margin contribution and receivable days, in line with the company’s Environment, Health & Safety and quality standards. KEY ACCOUNTABILITIES: Order Intake: Work towards achieving the assigned order intake target in the respective categories of Service Agreements, Service Repairs and Service Modernisation, while complying with company Finance, Ethics and Sales Policies. Sales: Work towards achieving the assigned sales target in the respective categories of Service Agreements, Service Repairs and Service Modernisation, with aggressive internal and external customer follow-up. Gross Margin: Work towards achieving the assigned Gross Margin target in the respective categories of Service Agreements, Service Repairs and Service Modernisation by extensive customer negotiation and winning projects at the right price. Receivables: Be personally responsible for the pending receivables from customer and ensure that all outstanding balances are cleared in timely manner. Qualifications: • Bachelor’s degree in mechanical engineering or equivalent. • 3-5 years of experience in HVAC service sales. • Knowledge of HVAC industry in Qatar • Qatar Driving license • Good command of written and spoken English, Arabic is a plus. What do we offer? • Benefit from our great workplace environment and culture • Participate in incentive plans • Get development and learning opportunities • Get competitive salary and benefits, suitable to your seniority level Carrier is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class.
Country : Qatar
Description : Description:
Hiring, Site Civil Engineer with the following qualification:
- Degree in civil engineering.
- Minimum 5 years of experience.
- Strong communication and interpersonal skills.
- Proven working experience as Site Engineer.
- Excellent knowledge of design and visualizations software such as AutoCAD, Civil 3D or similar.
- Fluent in dealing with the site supervision staff.
- Study project documents (Drawings, specifications, BOQ )
- Coordinate with the construction manager the required resources to achieve project scope according to the project baseline.
- Prepare daily inspection requests for the running activities.
- Prepare project daily report to the construction manager.
- jobs Inspect project sites to monitor progress and ensure conformance to design specifications and safety standards.
Job Description :Looking for an experienced Mechanical Supervisor in Qatar.Job Details:• Calculate amounts of concrete required for each job.• Detect, recognize and respond to dangerous conditions or situations.• Perform frequent safety inspections of work area, equipment, tools, and employees in accordance with SIC policy to ensure compliance with government regulations, customer requirements, and SIC’s safety program.• Appropriate journeyman experience required.Job Requirements:IT skill.Bachelors degree in Engineering.Good communication skill.Experience minimum 2 years in the same role.
Conllavino Construction Group
Description : Civil Engineer: job description
undertaking technical and feasibility studies including site investigations
using a range of computer software for developing detailed designs
undertaking complex calculations
liaising with clients and a variety of professionals including architects and subcontractors
compiling job specs and supervising tendering procedures
resolving design and development problems
managing budgets and project resources
scheduling material and equipment purchases and deliveries
making sure the project complies with legal requirements, especially health and safety
assessing the sustainability and environmental impact of projects
ensuring projects run smoothly and structures are completed within budget and on time
Key skills for civil engineers
sound mathematical, scientific and IT skills
the ability to think methodically and to manage projects
problem-solving skills
ability to work to deadlines and within budgets
ability to maintain an overview of entire projects while continuing to attend to detailed technicalities
excellent verbal and written communication skills
negotiating, supervisory and leadership skills
complete knowledge of relevant legislation
The engineer will perform a broad cross section of complex technical and administrative activities requiring extensive experience and specialization in Quality Control and Quality Assurance inspection of construction work. Job Duties: • Analyzes applicable codes, standards and project contract documents and monitors construction activities to ensure compliance. • Monitors and/or evaluates electrical tests and inspections such as ground-fault, ground resistance, insulation resistance, polarity, continuity, capacity, load and other electrical field tests as required. Able to interpret single-line and/or schematic electrical drawings as well as plans and specifications. • Field checks installation and location of electrical equipment, electrical duct, conduit, cable, panels and other components of the electrical system being installed. Assures compliance with approved submittals. • Monitors all electrical installations to assure circuitry, phasing equipment and grounding adhere to construction documents and National Electric Code requirements. • Provides general inspection on all construction and subcontractor work to assure a safe and workmanlike operation. • Verifies equipment settings, alignment, testing and energization requirements. • Evaluates and monitors adequacy of Contractor Quality Control (CQC) programs. Minimum Requirements • Minimum 8 years of work experience on construction and supervision projects. • Candidate must be MMUP registered. Preferred Qualifications • Diploma / Bachelor Degree in relevant Engineering field (i.e. Civil, Mechanical, Electrical, Structural etc.)
• Execute mechanical, electrical & plumbing activities according to drawings and taking approvals from consultant and client time to time.
• In-charge of material submittals and take off for materials in the site.
• Oversee and monitor the installation and handling of HVAC System, Fire Fighting System, Plumbing & Drainage System.
• Develop inspection procedures and implement throughout the construction stages. Ensure Implementation of Quality standards and Control.
• Coordinate with electrical and civil contractors for better work results at worksite
• Carried out inspections related to material and mechanical activities completed on site.MEP Emgieen
- Should have at least 5 years of experience in big infrastructure project across the middle east region
- Should have diploma/degree in Mechanical or Electrical Engineering
- Fluent in English Language
- Should be able to relocate in Qatar immediately
Country : Qatar
Description : Project Manager/Industrial ELV Engineer
Experience: 10-15 Years’ experience in industrial ELV Engineering, Networks, and Project Management including contract administrations.
Previously worked on integrated systems (Electrical and Logical) with medium/large scale projects.
Quality Engineer/ Controller.
Education : Any Degree
Experience : 1-4 years’ Experience as a Quality controller in the field of Inspection Bodies.
The candidate should have relevant knowledge in ISO 1720, ISO 17024 and Integrated management system related with the accreditation experience in DAC/ENAS.
Ae.centiel
Country : Qatar
Description : We are looking for an experienced Sales Engineer to join our team in Qatar.
Requirements:
• Degree in Electrical Engineering
• 5 to 7 years of UAE experience in UPS systems and related products
• Candidates having valid UAE driving license preferred
Suitable candidates can send their cv
As part of the ongoing project expansion,GRA-Gulf Coast Construction,LLC, is accepting application from qualified and experience engineers in different position: Project Engineers (For Water Division) Cost Control Engineers,Safety Officers,Project Engineer,Civil/Mechanical Engineer,Accountant,Sales Manager,Project Manager,Truck Drivers,Electrical,Structural Engineer,Quantity Surveyors, Tax Free.
Applicant should urgently forward your CV
Company : Focus Design Partners
Country : Qatar
Description : For applicant currently living in Qatar a MMUP License, NOC & Transferable is REQUIRED.
Mechanical Engineer shall provide leadership and comprehensive mechanical engineering support in planning developing and supervising mechanical installations, operations and building equipment. Capable of reviewing contractor’s submittals & proposed materials. Has full understanding of firefighting & building safety codes: i.e NFPA 101, Ashrea.. etc
Job description / Role
• Developing sustainable building services designs for commercial, educational, health care facilities, residential, tall tower, Infrastructure and mixed-use developments projects.
• Knowledge of ventilation and air conditioning systems and a successful track record of delivering detailed designs to the highest international standards.
• Performing engineering evaluations, Design reports, conceptual and final design.
• Have the basic knowledge of other mechanical systems, including but not limited to Firefighting, plumbing and gas distribution systems.
• Preparation of mechanical engineering calculation in support of systems’ design.
• Evaluating and analyzing statistical data, customer design proposals, specifications and manuals to determine feasibility of design or application.
• Working knowledge of various building services design codes such as British Standards, ASHRAE, NFPA, UPC,IPC, IMC and other International design codes. Knowledge in local Codes in Qatar QCS and QCDD has an added value.
• Interfacing, coordinating and working with the Arch, Structural and MEP design team in a professional manner to achieve project goals.
Requirements
• Bachelor’s Degree in Mechanical Engineering.
• 5 to 7 years of experience, with Major Exp into HVAC Design.
• Excellent communication and time management skills.
• Experience using computer HVAC design tools, AutoCAD, Revit MEP is essential.
A leading international engineering practice, offers service in architecture, interior design, master planning, landscape, urban design and building consultancy within Asia & Middle East currently require a Senior Civil Engineer to join their organisation.
Qualification:
• Minimum Bachelor’s Degree in Civil Engineering or relevant Subject
• Education qualification obtained from North America, West Europe, Australia
• Holder of Chartered Membership in relevant discipline (e.g. Engineering) would be an advantage
• MBA and/or secondary relevant degree would be advantage
• Holder of current/valid Driving License
Experience:
• 15 years of cumulative experience in a relevant field, minimum 5 years in treated/waste water including the managing the contractors and leading the team
• Experience of working in a multidisciplinary organization preferably in the Middle East
• Knowledge and experience in Contract Management. Ability to deliver and support change
• Knowledge of Quality, Health and Safety, and Environment policies, procedures and regulations.
• Competent in Microsoft Office Packages
• Ability to influence and engage stakeholders and staff at all levels within the Organization
• Ability to communicate verbally and in writing in English is mandatory.
• Ability to communicate verbally and in writing in Arabic is preferred
Garden House Center
Category : Engineering
Description : A reputed Landscaping Company in Qatar is urgently looking to hire for the following positions: 1. IRRIGATION ENGINEER: Bachelor of Irrigation Engineering. 5 years of relevant experience with minimum 3 years in GCC. Experience in Construction and Maintenance of Landscaping projects. 2. IRRIGATION FOREMAN: Diploma/Certificate in Irrigation. Minimum 5 years of relevant experience with 3 years in GCC. Experience in Construction and Maintenance of Landscaping projects. Note: All the above requirements are urgent. Only for candidates who are locally available in Qatar with Transferable Visa. Interested people can share their profile
AECOM is seeking a Mechanical Construction Engineer for an anticipated position supporting a construction effort in the country of Qatar. The mechanical engineer will research and analyze data such as customer design proposal, specifications, and manuals to determine feasibility of design or application. Provide mechanical design service including determination of HVAC loads, equipment selection, duct sizing and routing, interior plumbing design, exterior plumbing design, and fire protection systems. The work location for this position in Qatar. • Research and analyze data such as customer design proposal, specifications, and manuals to determine feasibility of design or application. • Design products or systems in support of facilities' infrastructure, research, or maintenance requirements. • Coordinate, troubleshoot, and approve installation activities as inspection services to ensure products and systems conform to engineering design and specifications. • Establish mechanical engineering design criteria and provide guidance and evaluation for facility projects; determine HVAC loads, complete equipment selection, perform duct sizing and routing, design interior/exterior plumbing and fire protection systems. • Able to serve as the alternate project lead in the absence of the site manager. • Perform all other position related duties as assigned or requested.
AklAziz----
Job Description : Urgently looking for an experienced Civil Engineer in Qatar. Job Details: • Provide technical direction and guidance to team members such as in-house drafters. • Develop practical solutions for construction and design-related issues. • Interact with external consulting engineers and customers. • Coordination of roadway design project plans with associated utilities. • Design municipal, transportation, water resources, public/private site development, and/or airport projects using CAD principles. • Understand and interpret design and construction specifications. Job Requirements: • Gradaute Holder. • Minimum 3 years experience is required. • Valid Qatar Driving License. • Good Communication & Interpersonal Skills. • IT Skills.
ompany : Lotus Trading & Contracting Co.
Country : Qatar
Description : CIVIL QA-QC ENGINEERS/INSPECTORS - Applicants must be a graduate of Bachelor's Degree in Civil Engineering, with 02-03 years work experience in handling QA/QC works for an infrastructure projects particularly roadworks and drainage systems, a resident of Doha and with transferable visa.
Company : Blueprint
Country : Qatar
Description : MEP Design Manager
Responsibilities:
• Manage all aspects with client, consultant, sub-contractors & internal engineering and design departments.
• Develop, manage, monitor and lead the entire MEP Design Process for the Project
• Manage a team of multinational staff of differing levels and ability
• Develop a Bill of Quantities (BOQ) based on standard forms
• Develop a procurement and work schedule for the projects
• Coordinate the RCP with the ID team
• Prepare, understand and evaluate mechanical and electrical detailed drawings for small scale projects (shops, restaurants, offices) and to ensure the connectivity with the design.
• Coordinates the mechanical, electrical, and plumbing elements of all projects and resolve all potential interference and conflicts.
• Provides interpretation of plan, detail sheets, and specifications for M/E
• Participates in evaluating contractors' proposals on tenders.
• Participates in project negotiations with contractors/ bidders.
• Visits sites on hand to ensure proper execution.
• Compose and document all project electromechanical related paper work
Requirements:
· Excellent knowledge of English
· Excellent Knowledge of HVAC Design
· Excellent Knowledge in Computer Applications such as AutoCad, Word, Excel, Outlook
Country : Qatar
Description : Mechanical Engineer
Consultancy Company looking to hire a Mechanical Engineer.
Requirements/Qualifications:
• UPDA certified Grade A or B with 10 years’ Experience or more is a must.
• Familiar of FF, ventilation and HVAC. Plumbing.
• Designing.
• Site supervision & execution.
• Preferable experience in Consultancy.
• Salary Between Qar. 8,000 To Qar. 12,000
• Send your UPDA License along with your resume
Country : Qatar
Description : We have a job opening for CIVIL QA/QC MANAGER. Applicants must fulfill the following qualifications :
Educational Qualification: Bachelor’s Degree in Civil Engineering with MMUP/UPDA Grade A License/Registration.
Number of years of experience: Minimum of 05- 07 years of experience in the same role of managing quality assurance and inspection of large projects of a civil contracting organization.
Specializations required: Certified Quality Manager/ Certified Quality Assurance Manager, Lead Auditor Certification, IMS (ISO 9001: 2015, OHSAS 45001: 2018, 14001: 2015),
Area of experience required:
1. Knowledge of using & implementation of the IMS system.
2. Experience with managing field engineering, inspection, and NDE related to all QA/QC functions.
3. Experience in project planning, execution (construction realities), management, and communication with all engineering groups.
4. Experience in shutdown planning and execution.
5. Development and management of non- conformance, deficiencies, and reporting programs, including root cause analysis.
Competency requirements:
1. High level of technical expertise and knowledge in quality control and quality assurance methodologies, testing, building products & specifications, and industrial quality standards.
2. Good knowledge and hands- on experience in External & Internal Quality Audit Programme.
3. Executes high level of organization and time management skills through an organized ability to create multiple timelines, documentation and reports.
4. Flexibility – works well under pressure and adapts quickly to different situations and demands.
5. Possesses excellent communication skills through effective communication with all levels of project personnel (Client Representatives, Consultants, Subcontractors, Site Staff and Workers).
6. Must be proactive and possesses strong physical ability and health to carry out the daily strenuous activities as the job requires travelling from different project sites, frequently changing work schedules and unexpected project requirements.
Umalbawaki
Country : Qatar
Description : Civil Supervisor
Salary 3000
Food room transport free
Also have ot
Easy To Change Sponsorship. More Position And Opportunities.
*Solve Noc Issue.
*Solve ID Issue.
* Solve Visa Change.
Urgent vacancy requirements.
planet earth qatar
Country : Qatar
Description : Required Site Engineer for Water Proofing Company in Qatar.
Candidate should have Valid Qatar Driving License & Transferable Visa
1 - 2 years Experience in Civil Construction/Waterproofing field
QR10-14k + flights & medical pr month
The Company
Digby Morris' client is a highly respected employer in the Qatari market. A privately owned main contractor which employs about 5000 employees entirely in Doha, the company has been operating for about 30 years and has a turnover in the region of $600m per annum. It is largely involved in traditional D&B construction projects including hotels and high rise commercial projects.
Owing to a pending retirement the company has an immediate requirement for an ELV Project Electrical Engineer to be based in their head office in Doha.
The Role
Employee shall be responsible for the complete delivery of End-to-End Projects.
The Key Roles shall be:
1.Preparation and coordination of all project documentation.
2.Coordinating the efforts of team members and third-party contractors or consultants to deliver projects according to plan.
3.Define the project’s objectives and oversee quality control throughout its life cycle.
4.Project Execution
5.Projects Finalization within time and budget
6.Responsible for Planning & Coordination of ELV works which includes Preparing & Monitoring of Construction
7.Develop the detailed schedules for all ELV activities; Design Procurement, Installation and Testing and Commissioning of the following disciplines:
8.Insure the update and forecast ELV activities
9.Insure the follow-up of the schedule
10.Report to the project Manager
11.Coordination with procurement team for timely delivery of materials at site
12.Monitoring execution and managing overall ELV works carrying out on site observation & coordination in interpreting drawing at site
13.In-house interfacing with other departments related to drawing & ability of front Preparation of sub-contractor billing, progress reports, project documentation, procurement details of materials at site
The Ideal Candidate:
• Diploma in Electronic Engineering or relevant discipline, university degree holder will be an advantage but not mandatory.
• At least 12 years relevant working experience in Security or ELV System installation for infrastructure.
• Be self-motivated and good communication skills with different levels of trades at site.
Assist in review of design plant layouts using AutoCAD and Plant 3D which could include items such as equipment, conveyors, machinery, piping, packaging lines, and raw material storage.
Assist in review of connection and interface between different plant or units from different vendors.
Follow all company, client and project specification design and drafting standards.
Issuing request for quotation based on project specifications, for mechanical items including pumps, air compressors, bagging machines, conveyors.
Review vendors technical offers for different mechanical equipment.
Issuing shop of drawings for different units such as pumping station, air composers rooms, machinery house, using 3D and 2D applications.
Apply basic formulas and compute necessary calculations regarding layout designs.
Work collaboratively utilizing design systems to produce mechanical shop drawings.
Execute design changes and project drawing revisions.
Skills and Experience:
• Bachelor engineering degree in Civil or Structural Engineering. Master Degree is an added advantage.
• Minimum 10 years of experience in design environment with design of Steel and Concrete building and Precast design experience.
• Well versed in American and Euro codes, standards, practices and local authority’s requirements.
• Hands on experience with FEM software such as ETABS, SAFE, SAP 2000, Staad Pro, Prokon etc.
• Ability to work independently and as a part of team.
Responsibilities:
• Perform analysis, design and documentation of simple as well as complex structures.
• Conduct review of structural design and drawings of buildings includes precast structures.
• Preparation, issue of design and review reports for authorities’ submission.
• Co-ordinate with other disciplines such as Architectural and MEP and infrastructure.
Supports the SPM Engineering and Interfaces Manager in providing direction and management of the Electrical design requirements for the Lusail project. • Interfaces with the Consultant’s Design Team to monitor schedule and budget performance. Reviews, coordinates and monitors the works of all Electrical designers to provide guidance regarding the vision of Lusail and project requirements and specifications. • A key function is to manage the responses to design RFIs, review/comment on Change Orders, and provide overall supervision for the design direct reports, while managing schedule and budget control. • Responsible for management of the delivery of the design of the various Electrical projects by verifying consistency in the design with respect to adherence to the design criteria and required standards. • Participates in the VE and manage all VE studies, constructability and other workshops; and drives the on-schedule submittal of the Electrical design deliverables. • Keeps Project Management Team constantly informed as to changes made in the field to ensure timely processing of contract change orders. • Prepares weekly work load reports, monitors the progress of work accomplished and reports to the higher management and the client. • Serves as primary interface with the design consultants in performing design reviews or addressing construction-related issues related to the electrical systems. • Regularly interacts with the client to share and understand the on-going design and construction issues • Maintains overall knowledge of drawings, specifications, general contracts and time schedules related to the various Electrical works. • Ensures all Electrical design works are comprehensive and discussed with the various engineers for the best implementation and installation of services in coordination with other parties and contractor. • May participate in negotiations with regulatory agencies in public meetings to support the client in matters related to the Electrical works. • Provides necessary technical support and design review / audit services to project management team ensuring the correctness and quality of implementation of requirements. • Understands all related codes and their application to the project; and overseas/manages the interface with local agencies to coordinate design standards usage and monthly approvals’ process
GRC Masters
Category : Engineering
Description : The Quality Engineer's responsibilities include designing quality standards, inspecting materials, equipment, processes, and products, developing quality control systems, and determining corrective actions. You will also work with managers and supervisors to implement quality measures. A successful Quality Engineer should have excellent troubleshooting skills and be able to ensure that processes and products consistently meet established quality standards. Quality Engineer Responsibilities: • Developing and implementing quality standards. • Developing and implementing quality control systems. • Monitoring and analyzing quality performance. • Inspecting and testing materials, equipment, processes, and products to ensure quality specifications are met. • Collaborating with operations managers to develop and implement controls and improvements. • Ensuring that workflows, processes, and products comply with safety regulations. • Investigating and troubleshooting product or production issues. • Developing corrective actions, solutions, and improvements. • Reviewing codes, specifications, and processes. Quality Engineer Requirements: • Degree in quality, industrial, or mechanical engineering. • ASQ certification preferred. • 2+ years of experience in quality engineering, quality assurance, or a similar role. • Experience coding and using QA software tools and processes. • Strong communication and interpersonal skills. • Strong analytical and problem-solving skills. • Excellent project management skills. Note : salary negotiable
A Bachelor's Degree of Engineering or university with major coursework in other closely related fields.
Qualifications :
Minimum of 4 years’ experience in a Planning role
Skills Required :
Experience of working in a pressurized environment, delivering to tight deadlines and providing input as high at Senior Management level.
A high level of PC literacy is required, with particular strengths in Microsoft Office applications
Brief Job Description:
Prepare / Reviewing the projects baseline schedule with relative Section / Department.
Update / monitoring the progress of the project (Highlighting projects problems and delay with mitigation plans if any).
Analyzing Project Status and reporting with the appropriate suggestions including Risks involved at each stage of the project.
Coordination with the concerned project manager / engineer for the issues related to Planning & Scheduling in addition to the Design Consultants.
Prepare / Reviewing the Projects Dashboards using the P6 Web & Update on weekly & monthly for the Sr. Management Review for the committed projects.
Issuing the Weekly / Monthly Reports or any other eventually reports requested by concerned department.
Attending Progress Meetings and highlighting the critical issues related to Planning and Scheduling.
Coordination with Projects Document Controllers to ensure that Document Controls System is properly implemented using the Electronic System such as Primavera Contract Management (PCM) , ERP etc.. and issue the weekly / monthly reports for the Open Submittals and Correspondence for follow-ups by projects concerned team.
Assisting Planning & Cost Control Section for the Claims, Variations & Addendum Evaluation and any other tasks associated with Planning & Cost Control Section.
Assisting in finalizing the KPI’s of ongoing projects with concerned engineer / section / dept.
Preparing tender and contract documents, including bills of quantities.
Undertaking cost analysis for repair and maintenance project work.
Assisting in establishing a client's requirements and undertaking feasibility studies.
Performing risk, value management and cost control.
Identifying, analysing and developing response to commercial risks.
Edgewater Technical Services WLL
Category : Engineering
Description : • Operate all valves as and when required. • Write defect notification to supervisor for all defects in transmission and distribution mains. • Isolate the valves during any incidents of pipe break or shut down of main line for any interconnection or maintenance work. • Resume water supply after repair work • Checks the area pressure/monitoring after the repair work • Daily valve operations for areas which are supplied less than 24 hrs. Water supply. • Dewater of all valve pits including reservoir chambers. • Routine air releasing from fire hydrant for all distribution mains. • Submit to supervisors daily and monthly reports. • Supervise the valve helpers • Other jobs assigned by the supervisor
The mechanical engineer will research and analyze data such as customer design proposal, specifications, and manuals to determine feasibility of design or application. Provide mechanical design service including determination of HVAC loads, equipment selection, duct sizing and routing, interior plumbing design, exterior plumbing design, and fire protection systems. The work location for this position is on the Al Udeid Air Base (AUAB) in Qatar. • Research and analyze data such as customer design proposal, specifications, and manuals to determine feasibility of design or application. • Design products or systems in support of facilities' infrastructure, research, or maintenance requirements. • Coordinate, troubleshoot, and approve installation activities as inspection services to ensure products and systems conform to engineering design and specifications. • Establish mechanical engineering design criteria and provide guidance and evaluation for facility projects; determine HVAC loads, complete equipment selection, perform duct sizing and routing, design interior/exterior plumbing and fire protection systems. • Able to serve as the alternate project lead in the absence of the site manager. • Perform all other position related duties as assigned or requested. • Due to nature of the work, candidate must be a US Citizen. Additional Information: • Qualified applicants who are offered a position must pass a pre-employment substance abuse test and be capable and willing to submit and pass random fitness for duty screening particularly for drugs and alcohol. IND-MR Minimum Requirements • Bachelor's Degree in Mechanical Engineering, and four plus (4) years of design experience and be capable of determination of HVAC loads, equipment selection, duct sizing and routing, interior plumbing plans, exterior plumbing plans, and fire protection systems. • Proficient in AutoCAD 2012 or later. • Must have experience in AutoCAD Civil 3D GIS systems. • Must possess and maintain a Secret Security Clearance. • Due to the nature of the work, candidate must be US Citizen Preferred Qualifications
Diploma in Mechanical Engineering or B Tech Mechanical
Minimum 5 yrs relevant work experience in steel fabrication shop
Understanding of Engineering Drawings/ Blueprints, symbols and standards
Perform accurate estimation in fabrication/ erection of steel structures to enable the Division to provide timey quotations to its customers.
Conduct estimations for all received customer inquiries in order to prepare quotations
Carry out identification and quantifying of materials required in production/erection of steel structures
Provide additional support for interpretation and clarification of Customer BOQ and Drawings.
Gulf work experience Preferred
Only male candidates need to apply.
Salary - QR 3,000 TO QR 4,500 +accommodation + Transport
Carrier is a global provider of sustainable building and refrigeration solutions. Ever since the establishment of Carrier Solutions as a joint venture between Ensrv and Carrier Corporation in 1999, we have always kept our customers at the center of every product & service we offer and act swiftly to exceed their expectations. Our efforts to provide industry-leading solutions to improve home comfort, productivity and efficiency have never looked better as we continue to build best-in-class products and services to our innovative controls and building automation systems. OVERALL JOB PURPOSE: To achieve the booking and sales target for Service and Aftermarket Business Unit products (Service Agreements (Maintenance contracts), Service Repairs and Service modernization (retrofit/replacement)) with specified gross margin contribution and receivable days, in line with the company’s Environment, Health & Safety and quality standards. KEY ACCOUNTABILITIES: Order Intake: Work towards achieving the assigned order intake target in the respective categories of Service Agreements, Service Repairs and Service Modernisation, while complying with company Finance, Ethics and Sales Policies. Sales: Work towards achieving the assigned sales target in the respective categories of Service Agreements, Service Repairs and Service Modernisation, with aggressive internal and external customer follow-up. Gross Margin: Work towards achieving the assigned Gross Margin target in the respective categories of Service Agreements, Service Repairs and Service Modernisation by extensive customer negotiation and winning projects at the right price. Receivables: Be personally responsible for the pending receivables from customer and ensure that all outstanding balances are cleared in timely manner. Qualifications: • Bachelor’s degree in mechanical engineering or equivalent. • 3-5 years of experience in HVAC service sales. • Knowledge of HVAC industry in Qatar • Qatar Driving license • Good command of written and spoken English, Arabic is a plus. What do we offer? • Benefit from our great workplace environment and culture • Participate in incentive plans • Get development and learning opportunities • Get competitive salary and benefits, suitable to your seniority level Carrier is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class.
Country : Qatar
Description : Description:
Hiring, Site Civil Engineer with the following qualification:
- Degree in civil engineering.
- Minimum 5 years of experience.
- Strong communication and interpersonal skills.
- Proven working experience as Site Engineer.
- Excellent knowledge of design and visualizations software such as AutoCAD, Civil 3D or similar.
- Fluent in dealing with the site supervision staff.
- Study project documents (Drawings, specifications, BOQ )
- Coordinate with the construction manager the required resources to achieve project scope according to the project baseline.
- Prepare daily inspection requests for the running activities.
- Prepare project daily report to the construction manager.
- jobs Inspect project sites to monitor progress and ensure conformance to design specifications and safety standards.
Job Description :Looking for an experienced Mechanical Supervisor in Qatar.Job Details:• Calculate amounts of concrete required for each job.• Detect, recognize and respond to dangerous conditions or situations.• Perform frequent safety inspections of work area, equipment, tools, and employees in accordance with SIC policy to ensure compliance with government regulations, customer requirements, and SIC’s safety program.• Appropriate journeyman experience required.Job Requirements:IT skill.Bachelors degree in Engineering.Good communication skill.Experience minimum 2 years in the same role.
Conllavino Construction Group
Description : Civil Engineer: job description
undertaking technical and feasibility studies including site investigations
using a range of computer software for developing detailed designs
undertaking complex calculations
liaising with clients and a variety of professionals including architects and subcontractors
compiling job specs and supervising tendering procedures
resolving design and development problems
managing budgets and project resources
scheduling material and equipment purchases and deliveries
making sure the project complies with legal requirements, especially health and safety
assessing the sustainability and environmental impact of projects
ensuring projects run smoothly and structures are completed within budget and on time
Key skills for civil engineers
sound mathematical, scientific and IT skills
the ability to think methodically and to manage projects
problem-solving skills
ability to work to deadlines and within budgets
ability to maintain an overview of entire projects while continuing to attend to detailed technicalities
excellent verbal and written communication skills
negotiating, supervisory and leadership skills
complete knowledge of relevant legislation